Based on the factorization theorem for lepton induced hard diffractive scattering and color octet heavy quarkonium production mechanism, ηc diffractive production in the direct photon process is studied. The results ...Based on the factorization theorem for lepton induced hard diffractive scattering and color octet heavy quarkonium production mechanism, ηc diffractive production in the direct photon process is studied. The results show that this process can be measured at DESY HERA, and ηc production has different features from J/Ψ production, which is weakly affected by the initial and final state gluon radiation. Therefore, ηc photoproduction can be viewed as reliable estimate. The experimental study of this process can give valuable insight in the co/or octet heavy quarkonium production mechanism.展开更多
Magneto-optic(MO)coupling of guided optical waves with microwave magnetostatic waves(MSWs)simultaneously excited by multiple radio frequency(RF)signals can lead to multifrequency diffraction effects and then parallel ...Magneto-optic(MO)coupling of guided optical waves with microwave magnetostatic waves(MSWs)simultaneously excited by multiple radio frequency(RF)signals can lead to multifrequency diffraction effects and then parallel processing of RF signals can be realized by using of the characteristics that diffraction efficiencies(DEs)are approximately in direct proportion to RF signals intensities and diffraction angles are related to frequencies of the corresponding RF signals within linear MO interaction region.In this paper,studied is the multifrequency MO Bragg diffraction in first-order MO interaction approximation,and obtained was the approximate analytical expression for principle diffraction efficiency(PDE).Also,put forward was a parallel imaging method of relative intensity of RF signals based on single-frequency diffraction.By calculation and analysis,it is shown that the relative error is not more than 0.3dB for the case of three RF signals within the frequency space of 60MHz.展开更多
Polyethylene material has some specification that makes very difficult any kind of inspection based on ultrasonic. The acoustic impedance and sound velocity in this kind of material are near to the materials commonly ...Polyethylene material has some specification that makes very difficult any kind of inspection based on ultrasonic. The acoustic impedance and sound velocity in this kind of material are near to the materials commonly used in ultrasonic wedges. Also this kind of materials are highly attenuative materials for ultrasound. To inspection of polyethylene circumferential but welds and overcome to all the problems mentioned, the especial technique of TOFD （Time of Flight Diffraction） method which employs low frequency probe and concentrate on the inspection area that longitudinal waves turn into transverse waves has been used. The purpose of inspection is determining the exact location of surface and internal welding defects. For this purpose, two separate polyethylene pipes with 10 inch in diameter, 15 mm thickness and also 25 inch diameter, 28 mm thickness, were selected. In total 40 artificial defects which involve 28 side drill holes in deferent depths and 12 surface and sub-surface notches were created. All artificially created defects were detected with very good accuracy. Unlike the conventional TOFD method which have 2 to 3 mm dead zone, by using the above method even surface notch with 0.5 mm has been detected.展开更多
The metal-organic framework Zn4O[1,4-benzenedicarboxylate]3(Zn4O[CO2-C6H4-CO2]3,commonly known as MOF-5,was prepared by the ultrasonic irradiation method.The catalyst was characterized by X-ray diffraction(XRD) and Fo...The metal-organic framework Zn4O[1,4-benzenedicarboxylate]3(Zn4O[CO2-C6H4-CO2]3,commonly known as MOF-5,was prepared by the ultrasonic irradiation method.The catalyst was characterized by X-ray diffraction(XRD) and Fourier transform infrared(FTIR) spectroscopy.It was then used as the catalyst for the preparation of polycarbonate diol(PCDL) via the transesterification between diphenyl carbonate(DPC) and 1,6-hexandiol(1,6-HD).Its catalytic activity in the transesterification process is evaluated by the yield of phenol,and its catalytic activity in the polycondensation process is determined by the number-average molecular weight(Mn) and the hydroxyl value.Compared to the triethylenediamine(C6H12N2),Mg-Al layered double hydroxide(Mg-Al LDH),sodium ethoxide(C2H5ONa) and sodium methoxide(CH3ONa),MOF-5 exhibits highest catalytic activity for the preparation of PCDL.Under reaction conditions(n(1,6-HD)/n(DPC) = 1.2,w(catalyst) = 0.03%,198 ℃),the yield of phenol is up to 90.1% and the PCDL shows highest Mn and lowest hydroxyl value.展开更多
文摘Based on the factorization theorem for lepton induced hard diffractive scattering and color octet heavy quarkonium production mechanism, ηc diffractive production in the direct photon process is studied. The results show that this process can be measured at DESY HERA, and ηc production has different features from J/Ψ production, which is weakly affected by the initial and final state gluon radiation. Therefore, ηc photoproduction can be viewed as reliable estimate. The experimental study of this process can give valuable insight in the co/or octet heavy quarkonium production mechanism.
基金National Natural Science Foundation of China(60671027)Sichuan Province Basic Research Project(07JY029-089)
文摘Magneto-optic(MO)coupling of guided optical waves with microwave magnetostatic waves(MSWs)simultaneously excited by multiple radio frequency(RF)signals can lead to multifrequency diffraction effects and then parallel processing of RF signals can be realized by using of the characteristics that diffraction efficiencies(DEs)are approximately in direct proportion to RF signals intensities and diffraction angles are related to frequencies of the corresponding RF signals within linear MO interaction region.In this paper,studied is the multifrequency MO Bragg diffraction in first-order MO interaction approximation,and obtained was the approximate analytical expression for principle diffraction efficiency(PDE).Also,put forward was a parallel imaging method of relative intensity of RF signals based on single-frequency diffraction.By calculation and analysis,it is shown that the relative error is not more than 0.3dB for the case of three RF signals within the frequency space of 60MHz.
文摘Polyethylene material has some specification that makes very difficult any kind of inspection based on ultrasonic. The acoustic impedance and sound velocity in this kind of material are near to the materials commonly used in ultrasonic wedges. Also this kind of materials are highly attenuative materials for ultrasound. To inspection of polyethylene circumferential but welds and overcome to all the problems mentioned, the especial technique of TOFD （Time of Flight Diffraction） method which employs low frequency probe and concentrate on the inspection area that longitudinal waves turn into transverse waves has been used. The purpose of inspection is determining the exact location of surface and internal welding defects. For this purpose, two separate polyethylene pipes with 10 inch in diameter, 15 mm thickness and also 25 inch diameter, 28 mm thickness, were selected. In total 40 artificial defects which involve 28 side drill holes in deferent depths and 12 surface and sub-surface notches were created. All artificially created defects were detected with very good accuracy. Unlike the conventional TOFD method which have 2 to 3 mm dead zone, by using the above method even surface notch with 0.5 mm has been detected.
基金supported by the Key Projects in the National Science & Technology Pillar Program during the Eleventh Five-Year Plan Period (2006BAE02B03)Jiangsu Provincial Science & Technology Pillar Program (BE2010065)
文摘The metal-organic framework Zn4O[1,4-benzenedicarboxylate]3(Zn4O[CO2-C6H4-CO2]3,commonly known as MOF-5,was prepared by the ultrasonic irradiation method.The catalyst was characterized by X-ray diffraction(XRD) and Fourier transform infrared(FTIR) spectroscopy.It was then used as the catalyst for the preparation of polycarbonate diol(PCDL) via the transesterification between diphenyl carbonate(DPC) and 1,6-hexandiol(1,6-HD).Its catalytic activity in the transesterification process is evaluated by the yield of phenol,and its catalytic activity in the polycondensation process is determined by the number-average molecular weight(Mn) and the hydroxyl value.Compared to the triethylenediamine(C6H12N2),Mg-Al layered double hydroxide(Mg-Al LDH),sodium ethoxide(C2H5ONa) and sodium methoxide(CH3ONa),MOF-5 exhibits highest catalytic activity for the preparation of PCDL.Under reaction conditions(n(1,6-HD)/n(DPC) = 1.2,w(catalyst) = 0.03%,198 ℃),the yield of phenol is up to 90.1% and the PCDL shows highest Mn and lowest hydroxyl value.
