Anodic coatings were prepared by micro-arc oxidation on AZ91HP magnesium alloys in a base solution containing 10 g/L NaOH and 12 g/L phytic acid with addition of 0-8 g/L sodium tungstate.The effects of sodium tungstat...Anodic coatings were prepared by micro-arc oxidation on AZ91HP magnesium alloys in a base solution containing 10 g/L NaOH and 12 g/L phytic acid with addition of 0-8 g/L sodium tungstate.The effects of sodium tungstate on the coating thickness, mass gain,surface morphology and corrosion resistance were studied by eddy current instrument,electronic scales,scanning electron microscope and immersion tester.With the addition of sodium tungstate,the electrolytic conductivity increases and the final voltage decreases.The sodium tungstate has a minor effect on the coating thickness,but lightens the coating color.With increasing sodium tungstate concentration,the size of micropores on the coatings is enlarged and the corrosion resistance of the anodized samples decreases.展开更多
A slip critical connection has various values to adopt the proper slip coefficient in various conditions of faying surfaces in AISC, AIJ and Eurocode3. The Korean Building Code regulates the unique slip coefficient, f...A slip critical connection has various values to adopt the proper slip coefficient in various conditions of faying surfaces in AISC, AIJ and Eurocode3. The Korean Building Code regulates the unique slip coefficient, from 0.45 to 0.5 without consideration of the diverse faying conditions in 2009. In this study, the slip resistance test, including five kinds of surface treatments were conducted to obtain the proper slip coefficients available to steel plate KS SM490A. The slip coefficient of specimens over zinc primer thickness of 128 lam exhibit was 0.42. The clean mill treated surface had prominently lower values as slip coefficient, 0.27. For red lead painted treatment, it is suggested to setup a minimum slip coefficient, 0,21, below a coating thickness of 65 μam. The slip coefficient of one faced lap connection was higher 1.4 times than the slip coefficient of two faced lap connection.展开更多
基金Projects(GJJ08363,GJJ09573)supported by the Scientific Research Fund of Jiangxi Provincial Education Department,China
文摘Anodic coatings were prepared by micro-arc oxidation on AZ91HP magnesium alloys in a base solution containing 10 g/L NaOH and 12 g/L phytic acid with addition of 0-8 g/L sodium tungstate.The effects of sodium tungstate on the coating thickness, mass gain,surface morphology and corrosion resistance were studied by eddy current instrument,electronic scales,scanning electron microscope and immersion tester.With the addition of sodium tungstate,the electrolytic conductivity increases and the final voltage decreases.The sodium tungstate has a minor effect on the coating thickness,but lightens the coating color.With increasing sodium tungstate concentration,the size of micropores on the coatings is enlarged and the corrosion resistance of the anodized samples decreases.
文摘A slip critical connection has various values to adopt the proper slip coefficient in various conditions of faying surfaces in AISC, AIJ and Eurocode3. The Korean Building Code regulates the unique slip coefficient, from 0.45 to 0.5 without consideration of the diverse faying conditions in 2009. In this study, the slip resistance test, including five kinds of surface treatments were conducted to obtain the proper slip coefficients available to steel plate KS SM490A. The slip coefficient of specimens over zinc primer thickness of 128 lam exhibit was 0.42. The clean mill treated surface had prominently lower values as slip coefficient, 0.27. For red lead painted treatment, it is suggested to setup a minimum slip coefficient, 0,21, below a coating thickness of 65 μam. The slip coefficient of one faced lap connection was higher 1.4 times than the slip coefficient of two faced lap connection.
