对小学数学立体式分层备课模式的思考

“立体式分层”备课模式是针对教师从“被备课”（抄写、复制教案）状态逐步过渡到“仿备课”（有思考的抄写、复制或摹仿）状态，再到“自备课”（真正根据自己所教学生的特点及所教内容的特点来备课）状态的实践过程中，总结出的一个相对有效的备课模式。把以往教学过程中“备点——课时备”模式逐渐向“线和面”（备线——单元备，备面——主题备）模式过渡。

In situ synthesis of hydrophobic magnesium hydroxide nanoparticles in a novel impinging stream-rotating packed bed reactor

Hydrophobic Mg(OH)_2nanoparticles were successfully synthesized via an in situ surface modification method in a novel impinging stream-rotating packed bed(IS-RPB) reactor using oleic acid(C_(17)H_(33)COOH, OA) as a surface modifier, magnesium chloride hexahydrate in the presence of ethanol as a precursor, and sodium hydroxide as a precipitant. The products were characterized by Fourier transform infrared spectroscopy(FTIR), Field emission scanning electron microscopy(FESEM), X-ray diffraction(XRD), and thermogravimetry-differential scanning calorimetry(TG-DSC). Compatibility with organic solutions was determined by sedimentation tests. The prepared nanoparticles exhibited regular hexagonal lamella with an average diameter of 30 nm when OA is added to the reaction system; this result indicates that OA regulates the morphology of the Mg(OH)_2nanoparticles.XRD revealed that the high-purity Mg(OH)_2product presents a brucite structure, and the I_(001)/I_(101) of hydrophobic Mg(OH)_2(0.86) was higher than that of the blank Mg(OH)_2(0.63). FTIR analysis showed that OA bonded to the surface of the Mg(OH)_2. Compared with the blank Mg(OH)_2product, the product obtained through the proposed method possesses excellent hydrophobic properties, including a high water contact angle of 101.4° and good compatibility with liquid paraffin. TG-DSC analysis indicated that the total percentage of mass loss of hydrophobic Mg(OH)_2(40.88%) was higher than that of the blank Mg(OH)_2product(33.18%). The in situ surface modification method proposed in this work presents potential use in the large-scale production of Mg(OH)_2nanoparticles.

Recent progress in Mg-Li matrix composites

Mg-Li matrix composites are one of the ideal structural materials in the fields of aerospace and military due to their high specific strength and stiffness, good damping and wear resistance, and small thermal expansion coefficient. The preparation technologies of Mg-Li matrix composites including powder metallurgy, pressure infiltration, stir-casting, foil metallurgy, and in-situ synthesis were introduced, and their advantages and disadvantages were compared. The common matrix alloys and reinforcements for Mg-Li matrix composites as well as the structure and performance of typical composites were mainly summarized. Then the interface chemistry between matrix and reinforcement was briefly reviewed. Finally, some problems existing at present and the possible solutions were discussed.

Development of CAD/CAM system and profile measuring device for CNC grinding machine to obtain an optimal grinding speed

Cam mechanics is one of the most popular devices for generating irregular motions and is widely used in automatic equipment,such as textile machines,internal combustion engines,and other automatic devices.In order to obtain a positive motion from the follower using a rotating cam,its shape should be correctly designed and manufactured.The development of an adequate CAD/CAM system for a cam profile CNC grinding machine is necessary to manufacture high-precision cams.The purpose of this study is the development of a CAD/CAM system and profile measuring device for a CNC grinding machine to obtain an optimal grinding speed with a constant surface roughness.Three types of disk cams were manufactured using the proposed algorithm and procedures to verify effectiveness of the developed CAD/CAM system.

Preparation of Luminescent Tb^3＋ Doped CaO Green Phosphor

CaCO3 was chosen as main raw material and Solid State method was used to prepare the sample. The precursor was directly sintered at 1100 ℃ with reducing atmosphere for 3 h to obtain new green CaO：Tb^3＋, Li^＋ Phosphors. The effects of the content of the doping ions Tb^3＋ on the luminescent properties have been studied. The structure, morphology and luminescent properties of the phosphors were characterized by XRD, SEM, UV and PL-PLE spectra respectively. The results showed that the CaO：Tb^3＋, Li^＋ was a single face-centered cubic crystals, the phosphor particle distributed uniformly. The phosphor has a strong absorptive capacity excited by 282 nm ultraviolet ray, and could emit the strong green light with the wavelength of 543 nm （^5D4→^7F5）. The CaO：Tb^3＋, Li^＋ is a new type of green fluorescent material.

Characterization of Ultra Fine Solids(BS) in Athabasca Bitumen

The ultra fine (<200 nm) inorganic solids (BS) were separated from bitumen which was washed by toluene and centrifugated at 2000 rpm. The result of PAS FTIR and image of TEM showed that the structure of BS particles was smiliar to that of kaolinite clay. On the surface of BS, both toluene insoluble organic matter and structural OH group are detected at the same time. The surface characteristics imparted a bi-wettable nature to the BS. As a result, the BS is able to stabilize fine water emulsion in the bitumen phase. The organic matter associated with BS is a possible factor of the fouling on catalyst and equipment.

Preparation and characterization of poly(amic acid)-stabilized silver nanoparticles

Stable and monodispersed silver nanoparticles were produced through a mild,convenient,one-pot method based on the reduction of silver nitrate in the presence of poly(amic acid) (PAA) as a stabilizer.The surface plasma band transition was monitored along with time in the reaction mixture for three sets of experiments by ultraviolet-visible spectroscopy.Analysis of the data with the Avrami equation yielded n exponent with values between 0.5 and 1.5,demonstrating three-dimensional heterogeneous nucleation and diffusion-controlled growth,accompanied by soft impingement effect.XRD and TEM analyses show a softly agglomerated polycrystalline state and a nearly spherical morphology (<50 nm) of nanoparticles.The FT-IR result indicates that the PAA molecular structure could be hardly influenced by the formation of nanoparticles.

Electromechanical dynamics analysis and simulation on rollforming equipment with both sides variable cross-section

Electromechanical dynamics analysis and simulation on a rollforming equipment with both sides variable cross-section are discussed in this study.The system includes mechanical parts and electromagnetism parts,and it is a strongly coupled electromechanical system.Based on a virtual work principle and given power,generalized forces of this system are obtained.By using Lagrange-Maxwell equations,a model of electromechanical dynamics is established.Differential equations of two-phase winding on d-q axis are obtained by Park transformation,which comes from three-phase winding equations on the A-B-C axis.This system is solved with the 4th order Runge-Kutta's method,and discrete solutions of all variables are obtained.Finally,by using Matlab language,the system is simulated.The results show that the proposed method works very well.

Study on Preparation of Rice Husk Ash with High Specific Surface Area and Its Chemical Reactivity

Preparation of rice husk ash with high specific surface area and chemical reactivity of the product are reported in this paper. The amorphous rice husk ash with high specific surface area of 311 m2·g-1 was produced by heating acid treated rice husk at 700℃ for 4 h. The isotherms of rice husk ash are similar in shape to type Ⅱof Brunaner's classification with mesopores being predominant. The rice husk ash has a high chemical reactivity,especially that pretreated with acid. This chemical reactivity depends on ashing temperature and pretreatment conditions. There is an exponential relation between the specific surface area of rice husk ash and the change in the conductivity of saturated Ca(OH)2 solution with rice husk ash, from which the specific surface area can be known according to the conductivity change.

A rapid one-step electrodeposition process for fabrication of superhydrobic surfaces on anode and cathode

This work presents a method to solve the weak solubility of zinc chloride(ZnCl_2) in the ethanol by adding some reasonable water into an ethanol electrolyte containing ZnCl_2 and myristic acid(CH_3(CH_2)_(12)COOH).A rapid one-step electrodeposition process was developed to fabricate anodic(2.5 min) and cathodic(40 s) superhydrophobic surfaces of copper substrate(contact angle more than 150°) in an aqueous ethanol electrolyte.Morphology,composition,chemical structure and superhydrophobicity of these superhydrophobic surfaces were investigated by SEM,FTIR,XRD,and contact angle measurement,respectively.The results indicate that water ratio of the electrolyte can reduce the required deposition time,superhydrophobic surface needs over 30 min with anhydrous electrolyte,while it needs only 2.5 min with electrolyte including 10 mL water,and the maximum contact angle of anodic surface is 166° and that of the cathodic surface is 168°.Two copper electrode surfaces have different reactions in the process of electrodeposition time,and the anodic copper surface covers copper myristate(Cu[CH_3(CH_2)_(12)COO]_2) and cupric chloride(CuCl);while,zinc myristate(Zn[CH_3(CH_2)_(12)COO]_2) and pure zinc(Zn) appear on the cathodic surface.

New development of sets equipment technologies for coal mine longwall face in China

Background of the development and achievement on sets equipment technologies for coal mine longwall face in China was reviewed initially. On the theoretical side, a coupling model of hydraulic support and surrounding rock, support pa- rameters optimization and threedimensional （3D） dynamic design method were presented. On the practical side, this paper out lined some of practical issues and discussed some relative methods and technologies. In thin seam coal longwall mining, how to lower equipment height is the first problem that should be solved. Roof pressure regularity, control of rooffall and collapse, and hydraulic support stability were investigated preferentially in 5-7 m coal seam longwall mining. The application of equip- ment for longwall mining with 5-7 m cutting height in China was concluded. The characteristics of full-mechanized top coal caving for extra thick seam coal were presented. The automation of top-caving hydraulic support and relevant equipment have achieved important breakthrough. At the end of this paper, further development of China＇s coal industry and longwall mining technologies and equipment were prospected in brief. This paper gives readers a comprehensive understanding of China＇s coal mine longwall face equipment technologies. It will give help to other countries on its coal mining development.

Effect of surface nanocrystallization and PPEC time on complex nanocrystalline hard layer fabricated by plasma electrolysis

Size distribution of nano-carbides produced by duplex treatments of surface nanocrystallization(by surface severe plastic deformation) and plasma electrolytic carburizing on CP-Ti was investigated.Skewness and kurtosis of Gussian shape distribution curves were studied and the effect of time was determined.The usage of longer time is more suitable for achieving less size of complex nano-carbides.Surface roughness of treated samples was measured.It is observed that there is an optimum level for time on surface roughness increasing(difference between two measured data).

Effects of coal rank, Fe_3O_4 amounts and activation temperature on the preparation and characteristics of magnetic activated carbon

Coal-based Magnetic Activated Carbons （CMAC＇s） were prepared from three representative coal samples of various ranks： Baorigele lignite from Inner Mongolia; Datong bitumite from Shanxi province; and Taixi anthracite from Ningxia Hui Auto- nomous Region. Fe3O4 was used as a magnetic additive. A nitrogen-adsorption analyzer was used to determine the specific surface area and pore structure of the resulting activated carbons. The adsorption capacity was assessed by the adsorption of iodine and methylene blue. X-ray diffraction was used to measure the evolution behavior of Fe304 during the preparation process. Magnetic properties were characterized with a vibrating-sample magnetometer. The effect of the activation temperature on the performance of CMAC＇s was also studied. The results show that, compared to Baorigele lignite and Taixi anthracite, the Datong bitumite is more appropriate for the preparation of CMAC＇s with a high specific surface area, an advanced pore structure and suitable magnetic properties. Fe304 can effectively enhance the magnetic properties and control the pore structure by increasing the ratio of meso- pores. An addition of 6.0% Fe304 and an activation temperature of 880 ℃ produced a CMAC having a specific surface area, an iodine adsorption, a methylene blue adsorption and a specific saturation magnetization of 1152.0 m2/g, 1216.7 mg/g, 229.5 mg/g and 4.623 emu/g, respectively. The coal used to prepare this specimen was Datong bitumite.

Improvement of surface corrosion resistance for magnesium alloy by combining thermal spray and cast-infiltration

The present work focuses on a new method combining cast-infiltration with thermal spraying technology to improve the surface corrosion resistance of magnesium alloy.A zinc-based alloy layer was fabricated on the surface of AZ91D magnesium alloy. The microstructure of the layer was characterized by scanning electron microscopy equipped with an energy dispersive X-ray spectroscopy(EDS).The phase constituent of these alloys was identified by X-ray diffractometry(XRD).The analysis results reveal that a zinc-based alloy layer with a thickness of 700μm can form on the surface of AZ91 alloy matrix.The layer is composed of Mg7Zn3,MgZn and a small amount of α-Mg solid solution.The results indicate that the corrosion-resistance of the specimen with a zinc-based alloy layer is much better than that of the specimen without the layer after being immersed in 5%NaCl solution for 240 h, and the layer is more protective for the AZ91 alloy.

Preparation of Ni nanoparticles plating by electrodeposition using reverse microemulsion as template

Ni nanoparticles plating was prepared in reverse microemulsion. The deposition was carried out through the Brownian motion of water pools in the reverse microemulsion and the adsorption of water pools on the electrode surface. Effects of electrolytic parameters on the size of Ni particles were studied. The performances of hydrogen evolution and hydrogen storage of the Ni nanoparticles plating electrode were also investigated. The results indicate that the size of Ni nanoparticles decreases with the increase of Ni2+ concentration and the decrease of current density. The electrochemical activity of Ni nanoparticles plating electrode is much higher than that of bulk Ni electrode.

Fabrication of Super Hydrophobic Surfaces on Copper by Solution-immersion

Super hydrophobic copper wafer was prepared by means of solution immersion and surface self-assembly methods. Different immersion conditions were explored for the best hydrophobic surface. Scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrometer (EDS) and water contact angle measurements were used to investigate the morphologies, microstructures, chemical compositions and hydrophobicity of the produced films on copper substrates, respectively. Results show that the super hydrophobic surface is composed of micro structure of Cu 7 S 4 . The films present a high water contact angle larger than 150°, a low sliding angle less than 3°, good abrasion resistance and storage stability. The molecular dynamics simulation confirms that N-dodecyl mercaptan molecules link up with Cu 7 S 4 admirably, compared with Cu, which contributes to the stable super hydrophobic surface.

Response Surface Optimization for Process Parameters of LiFePO_4/C Preparation by Carbothermal Reduction Technology

A statistically based optimization strategy is used to optimize the carbothermal reduction technology for the synthesis of LiFePO4/C using LiOH,FePO4 and sucrose as raw materials.The experimental data for fitting the response are collected by the central composite rotatable design(CCD).A second order model for the discharge ca-pacity of LiFePO4/C is expressed as a function of sintering temperature,sintering time and carbon content.The ef-fects of individual variables and their interactions are studied by a statistical analysis(ANOVA).The results show that the linear effects and the quadratic effects of sintering temperature,carbon content and the interactions among these variables are statistically significant,while those effects of sintering time are insignificant.Response surface plots for spatial representation of the model illustrate that the discharge capacity depends on sintering temperature and carbon content more than sintering time.The model obtained gives the optimized reaction parameters of sinter-ing temperature at 652.0 ℃,carbon content of 34.33 g?mol-1 and 8.48 h sintering time,corresponding to a dis-charge capacity of 150.8 mA·h·g-1.The confirmatory test with these optimum parameters gives the discharge ca-pacity of 147.2 and 105.1 mA·h·g-1 at 0.5 and 5 C,respectively.

High-Temperature Corrosion of Protective Coatings for Boiler Tubes in Thermal Power Plants

High-temperature corrosion is a serious problem for the water-wall tubes of boilers used in thermal power plants. Oxidation, sulfidation and molten salt corrosion are main corrosion ways.Thereinto, the most severe corrosion occurs in molten salt corrosion environment. Materials rich in oxides formers, such as chromium and aluminum, are needed to resist corrosion in high-temperature and corrosive environment, but processability of such bulk alloys is very limited. High velocity electric arc spraying (HVAS) technology is adopted to produce coatings with high corrosion resistance. By comparison, NiCr (Ni-45Cr-4Ti) is recommended as a promising alloy coating for the water-wall tubes, which can even resist molten salt corrosion attack. In the study of corrosion mechanism, the modern material analysis methods, such as scanning electron microscopy (SEM), X-ray diffractometry (XRD) and energy dispersive spectrometry (EDS), are used. It is found that the corrosion resistances of NiCr and FeCrAI coatings are much better than that of 20g steel, that the NiCr coatings have the best anti-corrosion properties, and that the NiCr coatings have slightly lower pores than FeCrAI coatings.It is testified that corrosion resistance of coatings is mainly determined by chromium content, and the microstructure of a coating is as important as the chemical composition of the material. In addition, the fracture mechanisms of coatings in the cycle of heating and cooling are put forward. The difference of the thermal physical properties between coatings and base metals results in the thermal stress inside the coatings. Consequently, the coatings spall from the base metal.

Nurse-staffing level and quality of acute care services:Evidence from cross-national panel data analysis in OECD countries

Background:Most of previous studies aimed to estimate the effect of nurse staffing on quality of acute hospital care have used stochastic methods and their results are mixed.Objective:To measure the magnitude of effect of nurse-staffing level on increasing quality of acute care services in long-run.Data:The number of practicing nurses'density per 1000 population as the proxy of nurse-staffing level and three Health Care Quality Indicators(HCQI)included 30-day mortality per 100 patients based on acute myocardial infarction(MORTAMIO),hemorrhagic stroke(MORTHSTO)and ischemic stroke(MORTISTO)were collected as a part of ongoing project by OECD.org in panels of 26 OECD countries over 2005-2015 period.Method:Panel data analysis.Results:There were committed relationships from nurse-staffing level to the enhancement of HCQI i.e.1%increase in nurse-staffing level would reduce the rates of patient mortality based on MORTAMIO,MORTHSTO and MORTISTO by 0.65%,0.60%and 0.80%,respectively.Furthermore,the role of nursestaffing level in increasing overall HCQI were simulated at the highest level in Sweden(-3.53),Denmark(-3.31),Canada(-2.59),Netherlands(-2.33),Finland(-2.09),Switzerland(-1.72),Australia(-1.64)and United States(-1.53).Conclusion:A higher proportion of nurses-staffing level is associated with higher quality of acute care services in OECD countries.Also,the nursing characteristics of Sweden,Denmark,Canada,Netherlands,Finland,Switzerland,Australia and United States would be good patterns for other countries to maximize nursing outcomes in the care of patients with acute and life-threatening conditions by reducing the risk of complication,mortality and adverse clinical outcomes.

Study of large medical equipment allocation in Xuzhou

Objective: To investigate the allocation and management of large medical equipment (LME) in Xuzhou, Jiangsu Province, China, in order to make the best use of LME to meet the medical needs of local people. Methods: The research collected data from all hospitals that have LME in Xuzhou using questionnaire; 38 (97.4%) hospitals returned the questionnaire. Results: In Xuzhou, there are a total of 71 pieces of LME, each serving 126 600 people in an area of 163 km2. Sixty-two percent of them are allocated in urban areas, with Gini coefficient at 0.52, indicating imbalance and biased allocation of LME. Conclusion: The al- location of LME in Xuzhou is out of control and unfairly allocated.