A high integrated monolithic IC, with functions of clock recovery, data decision, and 1 ： 4 demultiplexer,is implemented in 0.25μm CMOS process for 2.5Gb/s fiber-optic communications. The recovered and frequency div...A high integrated monolithic IC, with functions of clock recovery, data decision, and 1 ： 4 demultiplexer,is implemented in 0.25μm CMOS process for 2.5Gb/s fiber-optic communications. The recovered and frequency divided 625MHz clock has a phase noise of -106.26dBc/Hz at 100kHz offset in response to a 2.5Gb/s PRBS input data （2^31-1）. The 2.5Gb/s PRBS data are demultiplexed to four 625Mb/s data. The 0.97mm× 0.97mm IC consumes 550mW under a single 3.3V power supply （not including output buffers）.展开更多
We present a scheme for remotely preparing a state via the controls of many agents in a network.In thescheme,the agents' controls are achieved by utilizing quantum key distribution.Generally,the original state can...We present a scheme for remotely preparing a state via the controls of many agents in a network.In thescheme,the agents' controls are achieved by utilizing quantum key distribution.Generally,the original state can berestored by the receiver with probability 1/2 if all the agents collaborate.However,for certain type of original states therestoration probability is unit.展开更多
Failure of one or multiple critical nodes may partition wireless sensor networks into disjoint segments, and thus brings negative effect on the applications. We propose DCRS, a Distributed Connectivity Restoration Str...Failure of one or multiple critical nodes may partition wireless sensor networks into disjoint segments, and thus brings negative effect on the applications. We propose DCRS, a Distributed Connectivity Restoration Strategy to tolerate the failure of one critical node. Because of the energy restriction of sensor nodes, the energy overhead of the recovery process should be minimized to extend the lifetime of the network. To achieve it, we first design a novel algorithm to identify 2-critical nodes only relying on the positional information of 1-hop neighbors and some 2-hop neighbors, and then we present the criteria to select an appropriate backup for each critical node. Finally, we improve the cascaded node movement algorithm by determining whether a node can move to another non-adjacent node directly or not to reduce the number of nodes moved. The effectiveness of DCRS is validated through extensive simulation experiments.展开更多
Clustering data with varying densities and complicated structures is important,while many existing clustering algorithms face difficulties for this problem. The reason is that varying densities and complicated structu...Clustering data with varying densities and complicated structures is important,while many existing clustering algorithms face difficulties for this problem. The reason is that varying densities and complicated structure make single algorithms perform badly for different parts of data. More intensive parts are assumed to have more information probably,an algorithm clustering from high density part is proposed,which begins from a tiny distance to find the highest density-connected partition and form corresponding super cores,then distance is iteratively increased by a global heuristic method to cluster parts with different densities. Mean of silhouette coefficient indicates the cluster performance. Denoising function is implemented to eliminate influence of noise and outliers. Many challenging experiments indicate that the algorithm has good performance on data with widely varying densities and extremely complex structures. It decides the optimal number of clusters automatically.Background knowledge is not needed and parameters tuning is easy. It is robust against noise and outliers.展开更多
All optical network based on wavelength division multiplexing transmission system with optical cross connect (OXC) is an essential approach for optical commumications.Crosstalk introduced by OXC (specially large scale...All optical network based on wavelength division multiplexing transmission system with optical cross connect (OXC) is an essential approach for optical commumications.Crosstalk introduced by OXC (specially large scale one) is a key limiting factor for its capacity. Optical signal passing through a typical OXC is analyzed in this paper, followed by description of the generation and effect of intraband crosstalk.The power penalties induced by intraband crosstalk versus the number of multiplexed wavelengths M and the number of input fibers N have been given by numerical simulations. The results show that the coherent crosstalk is the most critical limitation on OXC and depends more closely on the number of multiplexed wavelengths M than the number of input fibers N . Crosstalk is suppressed by doubly filtering, fixing optimum decision-threshold and appropriately choosing the number of multiplexed wavelengths M .展开更多
Estimation and detection algorithms for orthogonal frequency division multiplexing (OFDM) systems can be de-veloped based on the sum-product algorithms, which operate by message passing in factor graphs. In this paper...Estimation and detection algorithms for orthogonal frequency division multiplexing (OFDM) systems can be de-veloped based on the sum-product algorithms, which operate by message passing in factor graphs. In this paper, we apply the sampling method (Monte Carlo) to factor graphs, and then the integrals in the sum-product algorithm can be approximated by sums, which results in complexity reduction. The blind receiver for OFDM systems can be derived via Sequential Monte Carlo (SMC) in factor graphs, the previous SMC blind receiver can be regarded as the special case of the sum-product algorithms using sampling methods. The previous SMC blind receiver for OFDM systems needs generating samples of the channel vector assuming the channel has an a priori Gaussian distribution. In the newly-built blind receiver, we generate samples of the virtual-pilots instead of the channel vector, with channel vector which can be easily computed based on virtual-pilots. As the size of the vir-tual-pilots space is much smaller than the channel vector space, only small number of samples are necessary, with the blind de-tection being much simpler. Furthermore, only one pilot tone is needed to resolve phase ambiguity and differential encoding is not used anymore. Finally, the results of computer simulations demonstrate that the proposal can perform well while providing sig-nificant complexity reduction.展开更多
In this paper we propose two iterative algorithms of joint channel estimation and symbol detection for Orthogonal Frequency Division Multiplexing (OFDM) systems. In which, superimposed pilot scheme is adopted and an i...In this paper we propose two iterative algorithms of joint channel estimation and symbol detection for Orthogonal Frequency Division Multiplexing (OFDM) systems. In which, superimposed pilot scheme is adopted and an initial Channel State Information (CSI) is obtained by employing a first-order statistic. In each subsequent iteration, we propose two algorithms to update the CSI. The Mean Square Error (MSE) of channel estimation and Bit Error Rate (BER) performance are given and simulation results demonstrate that the iterative algorithm using method B has good perform-ance approaching the ideal condition.展开更多
In this paper, the bit synchronization algorithms in GNSS receiver are introduced, including the traditional histogram method, K-P algorithm and Viterbi algorithm. The FPGA implementation is also included. A novel tim...In this paper, the bit synchronization algorithms in GNSS receiver are introduced, including the traditional histogram method, K-P algorithm and Viterbi algorithm. The FPGA implementation is also included. A novel time division multiplexing technology （TDM） based on multi-channel shared synchronizer is proposed in this paper to solve the constrained hardware resource problem of multi-system satellite navigation receiver. Through the using of control state machine and data register structure, we realize the multiplexing of bit synchronizer of navigation receiver, which saves the hardware resource. After the experiment, it can be verified that the receiver based on the bit synchronization and multiplexing technology can correctly restore the navigation information.展开更多
A wavelength division multiplexer based on curved polymer planar waveguide is proposed. According to the coupled modetheory and the waveguide structure, the performance of the curved waveguide coupler (CWC) is analyze...A wavelength division multiplexer based on curved polymer planar waveguide is proposed. According to the coupled modetheory and the waveguide structure, the performance of the curved waveguide coupler (CWC) is analyzed. The results showthat CWC can accommodate wider multiplexing bandwidth than parallel straight waveguide coupler (SWC) due to thecompensation effect of the effective coupling length. The two variables, curvature radius and minimum spacing, increasethe design flexibility of the waveguide device. A 4-channel wavelength division multiplexing (WDM) system based onCWC is designed. The deviation of the center wavelength, due to the errors of curvature radius and minimum spacingduring fabrication process, is investigated. The smaller the curvature radius and the minimum spacing are, the larger thecentral wavelength deviation caused by the error of the curvature radius and the minimum spacing is, which provides someuseful theoretical basis for the design and the fabrication of polymer waveguide devices.展开更多
Fatigue crack growth test of cracked metallic plate repaired with adhesive bonding composite patch was conducted to study the fracture behavior of crack patching. The failure mode was that crack grows along with adhes...Fatigue crack growth test of cracked metallic plate repaired with adhesive bonding composite patch was conducted to study the fracture behavior of crack patching. The failure mode was that crack grows along with adhesive debonding. The crack length and debonding area were measured at different numbers of cycles. The nonlinear three- dimensional(3D)finite element(FE)model considering adhesive debonding and crack growth simultaneously was developed. The experimental and analytical results were in good agreement with each other.展开更多
Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the expe...Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the experimental conditions. The catalytic activity of La 0.9Ce 0.1Fe 0.8-nCo 0.2RunO3 （n=0.01,0.03,0.05,0.07,0.09）series for the NO, NO-CO two components, CO-HC-NO three components were also analyzed. The catalytic investigation evidenced that the presence of Ru is necessary for making highly activity in decomposition of nitric oxide even at low temperature（400 ℃）and La 0.9Ce 0.9Fe 0.75Co 0.2Ru 0.05O3 （n=0.05） has better activity in all the samples, the conversion of it is 58.5%. With the reducing gas（CO,C3H6）added into the gas, the catalyst displayed very high activity in decomposition of NO and the conversion of it is 80% and 92.5% separately.展开更多
The method of numerical solving of nonlinear model problems of theory of a complex quasi-potential in doubly-connected nonlinear-layered curvilinear domains considering inverse influence function of flow on a conducti...The method of numerical solving of nonlinear model problems of theory of a complex quasi-potential in doubly-connected nonlinear-layered curvilinear domains considering inverse influence function of flow on a conductivity coefficient of medium was developed on the basis of synthesis of numerical methods of the quasi-conformal mappings and summary representations in conjunction with domain decomposition by method Schwartz. The proposed algorithm allows finding the potential of the quasiideals field, construction a motion grid （fluid-flow grid） simultaneously defining the flow lines that separate of sub-domains constancy of coefficient conductivity and identification the piecewise-constant values of coefficient conductivity, the local flows for the known measurements on boundary of domain.展开更多
So far, numerous numerical studies have been conducted on the behavior of Composite Reinforced Concrete-Steel （RCS） beam-to-column connections. However, the lack of studies regarding the steel joist-concrete girder ...So far, numerous numerical studies have been conducted on the behavior of Composite Reinforced Concrete-Steel （RCS） beam-to-column connections. However, the lack of studies regarding the steel joist-concrete girder connection has yet to be addressed through comprehensive finite element methods to get an understanding of influential parameters. Hence, in this paper, composite connection of embedded steel joist in concrete girder is investigated with an appropriate finite element software, namely, ABAQUS. The validity of the proposed model is examined by the comparison made with the test data in literature. Results indicate that maximum bending capacity of the connection is achieved when embedment ratio is 1.78. Moreover, double web angles in the embedment region significantly reduce the embedment length required to achieve the maximum bending capacity. Finally, damage analyses show that bending capacity of concrete girder is slightly reduced in the connection zone.展开更多
文摘A high integrated monolithic IC, with functions of clock recovery, data decision, and 1 ： 4 demultiplexer,is implemented in 0.25μm CMOS process for 2.5Gb/s fiber-optic communications. The recovered and frequency divided 625MHz clock has a phase noise of -106.26dBc/Hz at 100kHz offset in response to a 2.5Gb/s PRBS input data （2^31-1）. The 2.5Gb/s PRBS data are demultiplexed to four 625Mb/s data. The 0.97mm× 0.97mm IC consumes 550mW under a single 3.3V power supply （not including output buffers）.
基金Supported by the program for New Century Excellent Talents at the University of China under Grant No.NCET-06-0554the National Natural Science Foundation of China under Grant Nos.60677001,50672001,10874122,and 10747146+2 种基金the Science-Technology Fund of Anhui Province for Outstanding Youth under Grant No.06042087the Key Fund of the Ministry of Education of China under Grant No.206063the Natural Science Foundation of Guangdong Province under Grant Nos.06300345 and 7007806
文摘We present a scheme for remotely preparing a state via the controls of many agents in a network.In thescheme,the agents' controls are achieved by utilizing quantum key distribution.Generally,the original state can berestored by the receiver with probability 1/2 if all the agents collaborate.However,for certain type of original states therestoration probability is unit.
文摘Failure of one or multiple critical nodes may partition wireless sensor networks into disjoint segments, and thus brings negative effect on the applications. We propose DCRS, a Distributed Connectivity Restoration Strategy to tolerate the failure of one critical node. Because of the energy restriction of sensor nodes, the energy overhead of the recovery process should be minimized to extend the lifetime of the network. To achieve it, we first design a novel algorithm to identify 2-critical nodes only relying on the positional information of 1-hop neighbors and some 2-hop neighbors, and then we present the criteria to select an appropriate backup for each critical node. Finally, we improve the cascaded node movement algorithm by determining whether a node can move to another non-adjacent node directly or not to reduce the number of nodes moved. The effectiveness of DCRS is validated through extensive simulation experiments.
基金Supported by the National Key Research and Development Program of China(No.2016YFB0201305)National Science and Technology Major Project(No.2013ZX0102-8001-001-001)National Natural Science Foundation of China(No.91430218,31327901,61472395,61272134,61432018)
文摘Clustering data with varying densities and complicated structures is important,while many existing clustering algorithms face difficulties for this problem. The reason is that varying densities and complicated structure make single algorithms perform badly for different parts of data. More intensive parts are assumed to have more information probably,an algorithm clustering from high density part is proposed,which begins from a tiny distance to find the highest density-connected partition and form corresponding super cores,then distance is iteratively increased by a global heuristic method to cluster parts with different densities. Mean of silhouette coefficient indicates the cluster performance. Denoising function is implemented to eliminate influence of noise and outliers. Many challenging experiments indicate that the algorithm has good performance on data with widely varying densities and extremely complex structures. It decides the optimal number of clusters automatically.Background knowledge is not needed and parameters tuning is easy. It is robust against noise and outliers.
文摘All optical network based on wavelength division multiplexing transmission system with optical cross connect (OXC) is an essential approach for optical commumications.Crosstalk introduced by OXC (specially large scale one) is a key limiting factor for its capacity. Optical signal passing through a typical OXC is analyzed in this paper, followed by description of the generation and effect of intraband crosstalk.The power penalties induced by intraband crosstalk versus the number of multiplexed wavelengths M and the number of input fibers N have been given by numerical simulations. The results show that the coherent crosstalk is the most critical limitation on OXC and depends more closely on the number of multiplexed wavelengths M than the number of input fibers N . Crosstalk is suppressed by doubly filtering, fixing optimum decision-threshold and appropriately choosing the number of multiplexed wavelengths M .
基金Project supported by the National Hi-Tech Research and Develop-ment Program (863) of China (No. 2003AA123310) and the National Natural Science Foundation of China (No. 60332030)
文摘Estimation and detection algorithms for orthogonal frequency division multiplexing (OFDM) systems can be de-veloped based on the sum-product algorithms, which operate by message passing in factor graphs. In this paper, we apply the sampling method (Monte Carlo) to factor graphs, and then the integrals in the sum-product algorithm can be approximated by sums, which results in complexity reduction. The blind receiver for OFDM systems can be derived via Sequential Monte Carlo (SMC) in factor graphs, the previous SMC blind receiver can be regarded as the special case of the sum-product algorithms using sampling methods. The previous SMC blind receiver for OFDM systems needs generating samples of the channel vector assuming the channel has an a priori Gaussian distribution. In the newly-built blind receiver, we generate samples of the virtual-pilots instead of the channel vector, with channel vector which can be easily computed based on virtual-pilots. As the size of the vir-tual-pilots space is much smaller than the channel vector space, only small number of samples are necessary, with the blind de-tection being much simpler. Furthermore, only one pilot tone is needed to resolve phase ambiguity and differential encoding is not used anymore. Finally, the results of computer simulations demonstrate that the proposal can perform well while providing sig-nificant complexity reduction.
基金Supported by National "863" Project (No.2002AA123031).
文摘In this paper we propose two iterative algorithms of joint channel estimation and symbol detection for Orthogonal Frequency Division Multiplexing (OFDM) systems. In which, superimposed pilot scheme is adopted and an initial Channel State Information (CSI) is obtained by employing a first-order statistic. In each subsequent iteration, we propose two algorithms to update the CSI. The Mean Square Error (MSE) of channel estimation and Bit Error Rate (BER) performance are given and simulation results demonstrate that the iterative algorithm using method B has good perform-ance approaching the ideal condition.
基金the National Natural Science Foundation of China under Grant，the China Postdoctoral Science Foundation under Grant No.2013M530526，the Fundamental Research Funds for the Central Universities under Grant No.FRF-TP-14-046A2
文摘In this paper, the bit synchronization algorithms in GNSS receiver are introduced, including the traditional histogram method, K-P algorithm and Viterbi algorithm. The FPGA implementation is also included. A novel time division multiplexing technology （TDM） based on multi-channel shared synchronizer is proposed in this paper to solve the constrained hardware resource problem of multi-system satellite navigation receiver. Through the using of control state machine and data register structure, we realize the multiplexing of bit synchronizer of navigation receiver, which saves the hardware resource. After the experiment, it can be verified that the receiver based on the bit synchronization and multiplexing technology can correctly restore the navigation information.
基金This work was partially supported by the National Natural ScienceFoundation of China (No.60577014)the Young Teacher Cultiva-tion Foundation of Dalian University of Technology (No. 893210)the Doctor Start-up Foundation of Dalian University of Tech-nology (No. 893322).
文摘A wavelength division multiplexer based on curved polymer planar waveguide is proposed. According to the coupled modetheory and the waveguide structure, the performance of the curved waveguide coupler (CWC) is analyzed. The results showthat CWC can accommodate wider multiplexing bandwidth than parallel straight waveguide coupler (SWC) due to thecompensation effect of the effective coupling length. The two variables, curvature radius and minimum spacing, increasethe design flexibility of the waveguide device. A 4-channel wavelength division multiplexing (WDM) system based onCWC is designed. The deviation of the center wavelength, due to the errors of curvature radius and minimum spacingduring fabrication process, is investigated. The smaller the curvature radius and the minimum spacing are, the larger thecentral wavelength deviation caused by the error of the curvature radius and the minimum spacing is, which provides someuseful theoretical basis for the design and the fabrication of polymer waveguide devices.
文摘Fatigue crack growth test of cracked metallic plate repaired with adhesive bonding composite patch was conducted to study the fracture behavior of crack patching. The failure mode was that crack grows along with adhesive debonding. The crack length and debonding area were measured at different numbers of cycles. The nonlinear three- dimensional(3D)finite element(FE)model considering adhesive debonding and crack growth simultaneously was developed. The experimental and analytical results were in good agreement with each other.
基金Sponsored by the National Natural Science Foundation of China(Grant No.20271019 and 20576027), Natural Science Foundation of Heilongjiang Prov-ince(Grant No.B200504), Postdoctoral Foundationof Heilongjiang Province(Grant No.LBH-Z05066) and Education Department Foundation of Hei-longjiang Province(Grant No.11511270).
文摘Iron-based perovskite-type compounds modified by Ru were prepared through sol-gel process to study its catalytic activity of NOx direct decomposition at low temperature and evaluate the conversion of NO under the experimental conditions. The catalytic activity of La 0.9Ce 0.1Fe 0.8-nCo 0.2RunO3 （n=0.01,0.03,0.05,0.07,0.09）series for the NO, NO-CO two components, CO-HC-NO three components were also analyzed. The catalytic investigation evidenced that the presence of Ru is necessary for making highly activity in decomposition of nitric oxide even at low temperature（400 ℃）and La 0.9Ce 0.9Fe 0.75Co 0.2Ru 0.05O3 （n=0.05） has better activity in all the samples, the conversion of it is 58.5%. With the reducing gas（CO,C3H6）added into the gas, the catalyst displayed very high activity in decomposition of NO and the conversion of it is 80% and 92.5% separately.
文摘The method of numerical solving of nonlinear model problems of theory of a complex quasi-potential in doubly-connected nonlinear-layered curvilinear domains considering inverse influence function of flow on a conductivity coefficient of medium was developed on the basis of synthesis of numerical methods of the quasi-conformal mappings and summary representations in conjunction with domain decomposition by method Schwartz. The proposed algorithm allows finding the potential of the quasiideals field, construction a motion grid （fluid-flow grid） simultaneously defining the flow lines that separate of sub-domains constancy of coefficient conductivity and identification the piecewise-constant values of coefficient conductivity, the local flows for the known measurements on boundary of domain.
文摘So far, numerous numerical studies have been conducted on the behavior of Composite Reinforced Concrete-Steel （RCS） beam-to-column connections. However, the lack of studies regarding the steel joist-concrete girder connection has yet to be addressed through comprehensive finite element methods to get an understanding of influential parameters. Hence, in this paper, composite connection of embedded steel joist in concrete girder is investigated with an appropriate finite element software, namely, ABAQUS. The validity of the proposed model is examined by the comparison made with the test data in literature. Results indicate that maximum bending capacity of the connection is achieved when embedment ratio is 1.78. Moreover, double web angles in the embedment region significantly reduce the embedment length required to achieve the maximum bending capacity. Finally, damage analyses show that bending capacity of concrete girder is slightly reduced in the connection zone.
