唐代七言古诗论略

七言古诗是唐诗独有的面目。唐人对此一诗体创作上的贡献，是文学发展史上十分光辉的一页。初唐诗人立意创新．为七古开辟了道路；盛唐七古，臻于完备，争奇斗胜，各具特色；中唐有了明显的变化，即叙事七古的增多和七古的小说化，各家又有其独特的面貌；晚唐七古减少，名篇寥寥，而叙事性特点仍与中唐相一致。“变则堪久，通则不乏”。“若无新变，不能代雄”。复古通变，才能日新其业。这就是唐人七古盛而又盛的重要原因。

Simulation Research on Structure Changing Control over the Follow Up System of the Smart Mine

By analyzing the target's motion pattern, in terms of the requirement for the performance indexes of the follow up system, the structure changing control and time optimal theory is proposed. The system's control scheme from three different aspects(the dynamic response simulation, compound control simulation and dynamic tracking simulation) is also studied. And all the results proved the feasibility of the synthetical utilization of the open loop control, speed decreased control and position closed loop control.

Influence of deformation passes on interface of SiC_p/Al composites consolidated by equal channel angular pressing and torsion

Powder mixture of pure Al and oxidized Si C was consolidated into 10%（mass fraction） Si Cp/Al composites at 250 °C by equal channel angular pressing and torsion（ECAP-T）. The valence states of Si for Si C particulates and Al for the as-consolidated composites were detected by X-ray photoelectron spectroscopy（XPS）. The interfacial bondings of the composites were characterized by scanning electron microscopy（SEM）. The elements at the interface were linearly scanned by energy dispersive spectroscopy（EDS） and the EDS mappings of Si and Al were also obtained. The values of the nanohardness at different positions within 2 μm from the boundary of Si C particulate were measured. The results show that after ECAP-T, interfacial reaction which inhibits injurious interfacial phase occurs between Al and the oxide layer of Si C, and the element interdiffusion which can enhance interfacial bonding exists between Al and Si C. As ECAP-T passes increase, the reaction degree is intensified and the element interdiffusion layer is thickened, leading to the more smooth transition of the hardness from Si C to Al.

Phase evolution in AlSi20/8009 aluminum alloy during high temperature heating near melting point and cooling processes

The AlSi20/8009 aluminum alloy was heated to high temperatures near the melting point and cooled to investigate the effect of external Si addition on the phase evolution of Al12(Fe,V)3 Si dispersion. Differential scanning calorimeter, scanning electron microscope, energy dispersive spectrometer and X-ray diffractometer were employed.The results showed that Al12(Fe,V)3 Si and Si phases evolved into a needle-like Al4.5 Fe Si phase and a nano-sized V-rich phase during holding the alloy at 580-600℃. With increasing holding temperature to 620-640℃, Al4.5 Fe Si and nano-sized V-rich phases evolved reversibly into Al12(Fe,V)3 Si and Si phases, of which Al12(Fe,V)3 Si occupied a coarse and hexagonal morphology. During the alloy(after holding at 640 ℃) furnace cooling to 570 ℃ or lower, Si and Al12(Fe,V)3 Si phases evolved into strip-like Al4.5 Fe Si and the V-rich phases, which is a novel formation route for Al4.5 Fe Si phase different from Al-Fe-Si ternary system.

High-pressure torsion deformation process of bronze/niobium composite

The deformation process in the material volume under high-pressure torsion(HPT)was studied.As a model object for the observation of deformation process,we used a composite comprising a bronze matrix and niobium filaments.The arrangements of the niobium filaments in the bronze matrix and their size have regular geometry.This allows us to monitor and measure the displacement of the niobium filaments in the sample volume,which results from HTP.The bronze/niobium composite samples were subjected to HPT at room temperature and 6 GPa,and the number of revolutions N=1/4,1/2,1,2,3 and 5.It was shown that HPT with revolution number of 1 leads to the 360° rotation of entire sample volume without sample slippage.Similar deformational behavior during HPT can be expected for high-ductility metallic materials.The increase in the number of revolutions more than 2 leads to twisting the niobium filaments in the sample volume and the formation of 'vortex' multilayer structure.The mechanisms for the formation of such structures were discussed.

Hot deformation behaviour and processing maps of AA6061-10 vol. % SiC composite prepared by spark plasma sintering

AA6061-10 vol.% SiC composite was successfully prepared by spark plasma sintering. The deformation behaviour of this composite was studied using the uniaxial compression test, which was conducted at temperatures between 300 and 500℃ and strain rates between 0.001 and 1 s^-1. Results indicate that the stress-strain curves of the AA6061-10 vol.% SiC composite typically feature dynamic recrystallization. The steady stress can be described by a hyperbolic sine constitutive equation, and the activation energy of the composite is 230.88 kJ/mol. The processing map was established according to the dynamic materials model. The optimum hot deformation temperature is 450-500℃ and the strain rate is 1-0.1 s^-1. The instability zones of flow behaviour can also be identified using the processing map.