Combined shear-compression tests and simulations were performed on a closed-cell aluminum foam over a wide range of loading angles in order to probe their yield behaviors under biaxial loading conditions.Combined shea...Combined shear-compression tests and simulations were performed on a closed-cell aluminum foam over a wide range of loading angles in order to probe their yield behaviors under biaxial loading conditions.Combined shear-compression tests were carried out by using a pair of cylindrical bars with beveled ends.The yield surfaces were experimentally measured and compared with various theoretical yield surface models.The cellular structures of closed-cell aluminum foams were modeled as tetrakaidecahedrons and their biaxial crushing behaviors were simulated by the finite element method.The results show that,yield initiates from the stress-concentrated corners in the specimens under combined shear-compression loading and the stress distribution is no longer uniform at the specimen/bar interfaces.In the range of cell sizes studied,the larger the foam cell size is,the higher the yield stress is.Aluminum foam density is found to be the dominant factor on its mechanical properties compared with the cell size and is much more significant in engineering practice.展开更多
Hot compression behavior of Al6061/Al2O3nanocomposite was investigated in the temperature range of350-500°C andthe strain rate range of0.0005-0.5s-1,in order to determine the optimum conditions for the hot workab...Hot compression behavior of Al6061/Al2O3nanocomposite was investigated in the temperature range of350-500°C andthe strain rate range of0.0005-0.5s-1,in order to determine the optimum conditions for the hot workability of nanocomposite.Theactivation energy of285kJ/mol for the hot compression test is obtained by using hyperbolic sine function.By means of dynamicmaterial model(DMM)and the corresponding processing map,safe zone for the hot workability of AA6061/Al2O3is recognized attemperature of450°C and strain rate of0.0005s-1and at temperature of500°C and the strain rate range of0.0005-0.5s-1,with themaximum power dissipation efficiency of38%.Elongated and kinked grains are observed at400°C and strain rate of0.5s-1due tothe severe deformation.展开更多
Graphite oxide(GO) was prepared by the pressurized oxidation method and incorporated into polyimide(PI) matrix to fabricate high-k composite films by in-situ polymerization and subsequent thermal treatment. The result...Graphite oxide(GO) was prepared by the pressurized oxidation method and incorporated into polyimide(PI) matrix to fabricate high-k composite films by in-situ polymerization and subsequent thermal treatment. The results show that the as-prepared GO had good dispersion and compatibility in PI matrix due to the introduction of abundant oxygen-containing functional groups during the oxidation. The residual graphitic domains and the thermal treatment induced reduction of GO further enhanced the dielectric permittivity of the resulting GO–PI composites. The dielectric permittivity of the GO–PI composites exhibited a typical percolation behavior with a percolation threshold of 0.0347 of volume ratio and a critical exponent of 0.837. Near the percolation threshold, the dielectric permittivity of the GO–PI composite increased to 108 at 10~2 Hz and was 26 times that of the pure PI.展开更多
基金Project(2017JJ3359)supported by the Natural Science Foundation of Hunan Province,ChinaProject(KFJJ13-11M)supported by the Opening Project of State Key Laboratory of Explosion Science and Technology(Beijing Institute of Technology),China.
文摘Combined shear-compression tests and simulations were performed on a closed-cell aluminum foam over a wide range of loading angles in order to probe their yield behaviors under biaxial loading conditions.Combined shear-compression tests were carried out by using a pair of cylindrical bars with beveled ends.The yield surfaces were experimentally measured and compared with various theoretical yield surface models.The cellular structures of closed-cell aluminum foams were modeled as tetrakaidecahedrons and their biaxial crushing behaviors were simulated by the finite element method.The results show that,yield initiates from the stress-concentrated corners in the specimens under combined shear-compression loading and the stress distribution is no longer uniform at the specimen/bar interfaces.In the range of cell sizes studied,the larger the foam cell size is,the higher the yield stress is.Aluminum foam density is found to be the dominant factor on its mechanical properties compared with the cell size and is much more significant in engineering practice.
文摘Hot compression behavior of Al6061/Al2O3nanocomposite was investigated in the temperature range of350-500°C andthe strain rate range of0.0005-0.5s-1,in order to determine the optimum conditions for the hot workability of nanocomposite.Theactivation energy of285kJ/mol for the hot compression test is obtained by using hyperbolic sine function.By means of dynamicmaterial model(DMM)and the corresponding processing map,safe zone for the hot workability of AA6061/Al2O3is recognized attemperature of450°C and strain rate of0.0005s-1and at temperature of500°C and the strain rate range of0.0005-0.5s-1,with themaximum power dissipation efficiency of38%.Elongated and kinked grains are observed at400°C and strain rate of0.5s-1due tothe severe deformation.
基金Project(2013JSJJ002)supported by the Faculty Research Fund of Central South University,China
文摘Graphite oxide(GO) was prepared by the pressurized oxidation method and incorporated into polyimide(PI) matrix to fabricate high-k composite films by in-situ polymerization and subsequent thermal treatment. The results show that the as-prepared GO had good dispersion and compatibility in PI matrix due to the introduction of abundant oxygen-containing functional groups during the oxidation. The residual graphitic domains and the thermal treatment induced reduction of GO further enhanced the dielectric permittivity of the resulting GO–PI composites. The dielectric permittivity of the GO–PI composites exhibited a typical percolation behavior with a percolation threshold of 0.0347 of volume ratio and a critical exponent of 0.837. Near the percolation threshold, the dielectric permittivity of the GO–PI composite increased to 108 at 10~2 Hz and was 26 times that of the pure PI.
