A new kind of inertial piezoelectric actuator for a micro in-pipe robot is proposed and studied. The actuator is composed of a body, corresponding to a mass rod, and four elastic legs. Each leg is a composite piezoele...A new kind of inertial piezoelectric actuator for a micro in-pipe robot is proposed and studied. The actuator is composed of a body, corresponding to a mass rod, and four elastic legs. Each leg is a composite piezoelectric bimorph beam, made up of a middle metal element, an upper and lower piezoelectric elements. The mechanism is driven by an asymmetric waveform voltage, such as saw-toothed waveform, and utilizes the dynamic relationship between the maximum static friction force and the inertial force. To study the actuator, firstly, the constituent equation of a composite piezoelectric bimorph under both applied voltage and external force was inferred by thermodynamics. Secondly, the dvnamic model of the actuator was established analyzing the relationship between the locomotive states, viz. displacement and velocity, and design parameters, such as piezoelectric strain constant, elastic modulus,length, width and thickness of the piezoelectric element, actuator mass, and driving vohage. At last, the dynamic equation was solved and the theoretical calculation of the inherent frequency was more consistent with the experimental data, which proved the rationality of the model. All these lay a theoretical foundation of the micro actuator parameter optimization and more research on a micro robot.展开更多
A four-bar linkage mechanism with links fabricated from symmetric laminates was studied. The mass matrix of the beam dement was obtained in light of the mass distribution characteristics of composite materials. The st...A four-bar linkage mechanism with links fabricated from symmetric laminates was studied. The mass matrix of the beam dement was obtained in light of the mass distribution characteristics of composite materials. The stiffness matrix of the beam element was derived from the constitutive equations of each layer and the relationship between the strain distribution and the node displacement of the beam element. The specific damping capacity of the beam element was analyzed according to the strain distribution of the beam element and the strain energy dissipation caused by vibration in each direction of each layer; and the damping coefficients were obtained according to the principle that the total energy dissipation of the beam element was equal to the work done by the equivalent damping force during a cycle of vibration, from which the damping matrix of the dynamic equations was obtained. Using the finite element method, the dynamic analytic model of the mechanism was obtained. The dynamic responses and natural frequency of the mechanism were obtained by simulation, respectively, and those of the simulation obtained by the proposed model were analyzed and compared with the results obtained by the conventional model. The work provides theoretical basis to a certain extent for the further research on nonlinear vibration characteristics and optimum design of this kind of mechanism.展开更多
Granular HApB composite adsorbents, with dimensions of 4 mm × 4 mm, were prepared for the removal of lead from an aqueous solution. The effectiveness of the composites for Pb2＋ removal from an aqueous solution w...Granular HApB composite adsorbents, with dimensions of 4 mm × 4 mm, were prepared for the removal of lead from an aqueous solution. The effectiveness of the composites for Pb2＋ removal from an aqueous solution with different initial concentrations, adsorbent doses and reaction times were examined. The Langmuir isotherms, Freundlich isotherm models and pseudo-second order kinetic model were used in this analysis. It was found that the Langmuir model fitted the experimental data better than the Freundlich model, with a maximum adsorption capacity of 93.37 mg.g-1. The pseudo-second order kinetic model also fit the experiment data well with an adsorption capacity of 70.73 mg.g-1 after being reused for 3 times. Furthermore, the composites may possibly be used in processes for industrial water treatment.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.69774020)the National Doctoral Foundation of China(Grant No.98014106).
文摘A new kind of inertial piezoelectric actuator for a micro in-pipe robot is proposed and studied. The actuator is composed of a body, corresponding to a mass rod, and four elastic legs. Each leg is a composite piezoelectric bimorph beam, made up of a middle metal element, an upper and lower piezoelectric elements. The mechanism is driven by an asymmetric waveform voltage, such as saw-toothed waveform, and utilizes the dynamic relationship between the maximum static friction force and the inertial force. To study the actuator, firstly, the constituent equation of a composite piezoelectric bimorph under both applied voltage and external force was inferred by thermodynamics. Secondly, the dvnamic model of the actuator was established analyzing the relationship between the locomotive states, viz. displacement and velocity, and design parameters, such as piezoelectric strain constant, elastic modulus,length, width and thickness of the piezoelectric element, actuator mass, and driving vohage. At last, the dynamic equation was solved and the theoretical calculation of the inherent frequency was more consistent with the experimental data, which proved the rationality of the model. All these lay a theoretical foundation of the micro actuator parameter optimization and more research on a micro robot.
基金Projects(50175031, 50565001) supported by the National Natural Science Foundation of China project (2003203) supported by the New Century Ten Hundred and Thousand Talent Project Special Foundation of Guangxi+1 种基金 project(0542005) supported by Guangxi Science Foundation project(205119) supported by the Key Project of Chinese Ministry of Education
文摘A four-bar linkage mechanism with links fabricated from symmetric laminates was studied. The mass matrix of the beam dement was obtained in light of the mass distribution characteristics of composite materials. The stiffness matrix of the beam element was derived from the constitutive equations of each layer and the relationship between the strain distribution and the node displacement of the beam element. The specific damping capacity of the beam element was analyzed according to the strain distribution of the beam element and the strain energy dissipation caused by vibration in each direction of each layer; and the damping coefficients were obtained according to the principle that the total energy dissipation of the beam element was equal to the work done by the equivalent damping force during a cycle of vibration, from which the damping matrix of the dynamic equations was obtained. Using the finite element method, the dynamic analytic model of the mechanism was obtained. The dynamic responses and natural frequency of the mechanism were obtained by simulation, respectively, and those of the simulation obtained by the proposed model were analyzed and compared with the results obtained by the conventional model. The work provides theoretical basis to a certain extent for the further research on nonlinear vibration characteristics and optimum design of this kind of mechanism.
文摘Granular HApB composite adsorbents, with dimensions of 4 mm × 4 mm, were prepared for the removal of lead from an aqueous solution. The effectiveness of the composites for Pb2＋ removal from an aqueous solution with different initial concentrations, adsorbent doses and reaction times were examined. The Langmuir isotherms, Freundlich isotherm models and pseudo-second order kinetic model were used in this analysis. It was found that the Langmuir model fitted the experimental data better than the Freundlich model, with a maximum adsorption capacity of 93.37 mg.g-1. The pseudo-second order kinetic model also fit the experiment data well with an adsorption capacity of 70.73 mg.g-1 after being reused for 3 times. Furthermore, the composites may possibly be used in processes for industrial water treatment.
