In-situ Micro-CT analysis of deformation behavior in sandwich-structured meta-stable beta Ti−35Nb alloy

Beta Ti−35Nb sandwich-structured composites with various reinforcing layers were designed and produced using additive manufacturing(AM)to achieve a balance between light weight and high strength.The impact of reinforcing layers on the compressive deformation behavior of porous composites was investigated through micro-computed tomography(Micro-CT)and finite element method(FEM)analyses.The results indicate that the addition of reinforcement layers to sandwich structures can significantly enhance the compressive yield strength and energy absorption capacity of porous metal structures;Micro-CT in-situ observation shows that the strain of the porous structure without the reinforcing layer is concentrated in the middle region,while the strain of the porous structure with the reinforcing layer is uniformly distributed;FEM analysis reveals that the reinforcing layers can alter stress distribution and reduce stress concentration,thereby promoting uniform deformation of the porous structure.The addition of reinforcing layer increases the compressive yield strength of sandwich-structured composite materials by 124%under the condition of limited reduction of porosity,and the yield strength increases from 4.6 to 10.3 MPa.

Progressive failure analysis of composite structure based on micro- and macro-mechanics models

Based on parameter design language, a program of progressive failure analysis in composite structures is proposed. In this program, the relationship between macro- and micro-mechanics is established and the macro stress distribution of the composite structure is calculated by commercial finite element software. According to the macro-stress, the damaged point is found and the micro-stress distribution of representative volume element is calculated by finite-volume direct averaging micromechanics(FVDAM). Compared with the results calculated by failure criterion based on macro-stress field(the maximum stress criteria and Hashin criteria) and micro-stress field(Huang model), it is proven that the failure analysis based on macro- and micro-mechanics model is feasible and efficient.

Healing Temperature of Hybrid Structures Based on Genetic Algorithm

The healing temperature of suspen-dome with stacked arches(SDSA)and arch-supported single-layer lattice shell structures was investigated based on the genetic algorithm. The temperature field of arch under solar radiation was derived by FLUENT to investigate the influence of solar radiation on the determination of the healing temperature. Moreover, a multi-scale model was established to apply the complex temperature field under solar radiation. The change in the mechanical response of these two kinds of structures with the healing temperature was discussed. It can be concluded that solar radiation has great influence on the healing temperature, and the genetic algorithm can be effectively used in the optimization of the healing temperature for hybrid structures.

Synergistic effect of a new wedge-bond-type anchor for CFRP tendons

In order to improve the anchoring force of anchors for carbon fiber reinforced polymer(CFRP) tendons further, a new wedge-bond-type anchor for CFRP tendons was developed. The increment in anchoring force induced by the clamping segment of anchor was studied. Taking the deformation of all parts in clamping segment in the transverse direction into consideration, the calculation formula for the increment of anchoring force was proposed based on the linear elastic hypotheses. The proposed model is verified by experiments and conclusions are drawn that the anchoring force is influenced mainly by the inclination angle of clamping pieces, the length of clamping part and the thickness of bonding medium. Especially, the thickness of bonding medium should be lowered in design to improve the synergistic effect of anchors.

基于业主视角的国际工程EPC项目结算方式对比研究

目前,国际工程EPC项目的结算方式主要有两种:按里程碑结算和按工程进度结算。在工程实践中,两种方式相结合的复合结算方式也较为常见。从业主管理视角出发,对比分析在里程碑结算、工程进度结算、复合结算三种模式下业主对EPC工程管理深度的差异,探究业主通过工程结算了解、掌握承包商项目执行过程的内在联系。

济宁费用结算三步曲

医疗保险工作的实践显示,做好医疗保险工作需要一个好的结算办法,但要做到这一点又非常困难。在摸索中,济宁医保经历三次转变,开始步入良性循环的轨道……

Theoretical modeling of steel reinforced ECC column under eccentric compressive loading

Fiber reinforced cementitious composites(ECC) are a class of advanced composites with strain hardening and multiple cracking behaviors. Substitution of concrete with ECC can significantly improve the seismic resistance and durability of the infrastructures. In this paper, it is proposed to use ECC as the matrix of frame columns for improving its load carrying capacity, ductility, and avoiding the brittleness of concrete. Based on the assumption of plane remaining plane and constitutive models of materials, theoretical models for calculating the load-carrying capacity of the steel reinforced ECC columns under small and large eccentric compression are proposed. With the parameters of the constitutive models from the existing experimental data, the relationship between ultimate axial load and moment capacities is also derived with the proposed models. To verify the validity of the proposed theoretical models, finite element analysis with the software of ATENA is conducted to simulate the mechanical behavior of the steel reinforced ECC columns under eccentric compressive loading. The calculation results from the theoretical models show good consistency with the simulated results, indicating that the proposed models are feasible and reliable for design. Finally, based on the theoretical models, the effect of the ultimate tensile strain and compressive strength of ECC, longitudinal reinforcement ratio on the load carrying capacity of the steel reinforced ECC column are comprehensively studied.