A novel materials design procedure based on the co-doping of metal nanoparticle and azo dye compound （MNPADC） is developed to improve the properties of functional molecules. The synthesized materials were characteri...A novel materials design procedure based on the co-doping of metal nanoparticle and azo dye compound （MNPADC） is developed to improve the properties of functional molecules. The synthesized materials were characterized by transmission electron micrograph （TEM）, ultraviolet-visible absorption spectra （UV-Vis） and fluorescence spectra （FS）. It was found that the fluorescence intensity of methyl orange （MO） was enhanced by 5 times in the aqueous composite system doped with silver nanoparticles whereas it was reduced by 15% and 20% in composite films with co-mixing and coating structures, respectively. The results indicate that the properties of functional molecules can be greatly improved in composite film with supra molecular structure and that the procedure presented here is effective.展开更多
Anodized composite films containing Si C nanoparticles were synthesized on Ti6Al4 V alloy by anodic oxidation procedure in C4O6H4Na2 electrolyte. Scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) ...Anodized composite films containing Si C nanoparticles were synthesized on Ti6Al4 V alloy by anodic oxidation procedure in C4O6H4Na2 electrolyte. Scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray photoelectron spectroscopy(XPS) were employed to characterize the morphology and composition of the films fabricated in the electrolytes with and without addition of Si C nanoparticles. Results show that Si C particles can be successfully incorporated into the oxide film during the anodizing process and preferentially concentrate within internal cavities and micro-cracks. The ball-on-disk sliding tests indicate that Si C-containing oxide films register much lower wear rate than the oxide films without Si C under dry sliding condition. Si C particles are likely to melt and then are oxidized by frictional heat during sliding tests. Potentiodynamic polarization behavior reveals that the anodized alloy with Si C nanoparticles results in a reduction in passive current density to about 1.54×10-8 A/cm2, which is more than two times lower than that of the Ti O2 film(3.73×10-8 A/cm2). The synthesized composite film has good anti-wear and anti-corrosion properties and the growth mechanism of nanocomposite film is also discussed.展开更多
In this paper, the effect of hydrogen reduction of silver ions on the performance and structure of new solid polymer electrolyte polyetherimide （PEI）/Pebax2533 （Polynylonl2/tetramethylene oxide block copolymer, PA1...In this paper, the effect of hydrogen reduction of silver ions on the performance and structure of new solid polymer electrolyte polyetherimide （PEI）/Pebax2533 （Polynylonl2/tetramethylene oxide block copolymer, PA12-PTMO）/AgBF4 composite membranes is investigated. For PEI/Pebax2533/AgBF4 composite membranesprepared with dillerent AgBF4 concentration, the permeances of propylene and ethylene increase with the increase of AgBF4 concentration due to the carrier-facilitated transport, resulting in a high selectivity. But for propyl- ene/propane mixture, the mixed-gas selectivity is lower than its ideal selectivity. The hydrogen reduction strongly influences the membrane performance, which causes the decrease of propylene permeance and the increase of pro-pane permeance. With the increase of hydrogen reduction time, the membranes show a clearly color change from white to brown, yielding a great selectivity loss. The data of X-ray diffraction and FT-IR prove that silver ions are reduced to Ago after hydrogen reduction, and aggregated on the surface of PEI/Pebax2533/AgBF4 composite mem- branes.展开更多
A numerical study of bitubular tubes with diaphragms compared with single and bitubular tubes subjected to dynamic axial impact force was presented. At first, the energy absorption response of the composite structure ...A numerical study of bitubular tubes with diaphragms compared with single and bitubular tubes subjected to dynamic axial impact force was presented. At first, the energy absorption response of the composite structure under axial loading was analyzed by finite element simulation. The results show that the efficiency of energy absorption can be improved by introducing diaphragms to the double-walled columns. Then, the effect of the amount and location of diaphragms, the shape and the size of the inner tubes, and the thickness of the composite structures were also studied numerically. The collision performance of the composite structure is affected by the deformation of diaphragms, as well as the interaction of outer and inner tube. The non-uniform distribution of diaphragms can improve the energy absorption efficiency of structures for a constant number of diaphragms. The specific energy absorption of the hexagonal inner tube is the highest, followed by the circular, octagonal and square ones.展开更多
An organic-magnesium complex conversion(OMCC)coating on AZ91D magnesium alloy was obtained by treating in a solution containing organic compounds.SEM,FESEM and XPS were used to examine the surface morphology,thickness...An organic-magnesium complex conversion(OMCC)coating on AZ91D magnesium alloy was obtained by treating in a solution containing organic compounds.SEM,FESEM and XPS were used to examine the surface morphology,thickness and structure of the conversion coatings.The results show that the continuous and uniform conversion coating is deposited on AZ91D alloy and the main component of the coatings is organic compound containing benzene ring,which forms a chemical bond with magnesium.The polarization measurement and salt spray test show that the corrosion resistance of the conversion coating is much higher than that of traditional chromate conversion coating.展开更多
Both of planar and mesoporous architectures prevail for perovskite solar cells(PSCs).However,it is still an open question how the architecture affects the performance of PSCs.The inconsistent results in the references...Both of planar and mesoporous architectures prevail for perovskite solar cells(PSCs).However,it is still an open question how the architecture affects the performance of PSCs.The inconsistent results in the references often create confusion.In particular,the specific roles of mesoporous frameworks are yet to be well elaborated and require further clarification.In this study,we carefully compared the properties of perovskite films and the device performances for both architectures to unravel the roles of mesoporous TiO2 framworks in CH3NH3PbI3 PSCs.The detailed characterizations of structural,microscopic,optical and electrical properties revealed that the presence of mesoporous TiO2 framework contributed to enlarged perovskite crystal sizes,enhanced light harvesting,efficient electron extration and suppressed charge recombination.As a result,compared with the planar device,the mesoporous device yielded an improved power conversion efficiency of 18.18%,coupled with a reduced hystersis.This study reveals the benefits of mesoporous TiO2 framework in PSCs and provides the guidance for the design and optimization of architectures for high-performance devices.展开更多
An appropriate diameter and wire-to-wire dis- tance is critical for optimizing the performance of hybrid inorganic/organic photovoltaic devices. For a deep under- standing of their influences on such hybrid structures...An appropriate diameter and wire-to-wire dis- tance is critical for optimizing the performance of hybrid inorganic/organic photovoltaic devices. For a deep under- standing of their influences on such hybrid structures, the well-ordered ZnO nanowires with different diameters are fabricated by the versatile hydrothermal growth. The dependence of the photovoltaic performance on the surface states, wire diameter and wire-to-wire distance is investi- gated. We demonstrate that the pristine thick ZnO nanowires film possess a higher surface photovoltage （SPV） response than the thin one. This is mainly due to the influence of surface states on the thin ZnO nanowires, which can capture the photo-generated carriers. When the two kinds of ZnO nanowires are fabricated into a hybrid inorganic/organic structure, the thin ZnO nanowires/poly（3-hexylthiophene） hybrid film has a higher SPV response than the thick one, which is contrary to the pristine ZnO nanowires. This is benefited from the smaller diameter and wire-to-wire dis- tance of the thin ZnO nanowires owned. The crystallinity, wire diameter and wire-to-wire distance have the crucial influence on the final photovoltaic performance. The results shown here give us insights toward designing efficient hybrid photovoltaic devices.展开更多
基金This work was supported by the National Natural Science Foundation of China （Grant No. 50271038）the Key Research Project Foundation of Shaanxi Normal University of China （No. 200403） Specialized Research Fund for the Doctoral Program of Higher Education of China （No. 20050698017）.
文摘A novel materials design procedure based on the co-doping of metal nanoparticle and azo dye compound （MNPADC） is developed to improve the properties of functional molecules. The synthesized materials were characterized by transmission electron micrograph （TEM）, ultraviolet-visible absorption spectra （UV-Vis） and fluorescence spectra （FS）. It was found that the fluorescence intensity of methyl orange （MO） was enhanced by 5 times in the aqueous composite system doped with silver nanoparticles whereas it was reduced by 15% and 20% in composite films with co-mixing and coating structures, respectively. The results indicate that the properties of functional molecules can be greatly improved in composite film with supra molecular structure and that the procedure presented here is effective.
基金Project(51271012)supported by the National Natural Science Foundation of China
文摘Anodized composite films containing Si C nanoparticles were synthesized on Ti6Al4 V alloy by anodic oxidation procedure in C4O6H4Na2 electrolyte. Scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray photoelectron spectroscopy(XPS) were employed to characterize the morphology and composition of the films fabricated in the electrolytes with and without addition of Si C nanoparticles. Results show that Si C particles can be successfully incorporated into the oxide film during the anodizing process and preferentially concentrate within internal cavities and micro-cracks. The ball-on-disk sliding tests indicate that Si C-containing oxide films register much lower wear rate than the oxide films without Si C under dry sliding condition. Si C particles are likely to melt and then are oxidized by frictional heat during sliding tests. Potentiodynamic polarization behavior reveals that the anodized alloy with Si C nanoparticles results in a reduction in passive current density to about 1.54×10-8 A/cm2, which is more than two times lower than that of the Ti O2 film(3.73×10-8 A/cm2). The synthesized composite film has good anti-wear and anti-corrosion properties and the growth mechanism of nanocomposite film is also discussed.
基金Supported by the National Natural Science Foundation of China （20776137） and the National High Technology Research and Develooment Prozram of China （2008AA06Z325）.
文摘In this paper, the effect of hydrogen reduction of silver ions on the performance and structure of new solid polymer electrolyte polyetherimide （PEI）/Pebax2533 （Polynylonl2/tetramethylene oxide block copolymer, PA12-PTMO）/AgBF4 composite membranes is investigated. For PEI/Pebax2533/AgBF4 composite membranesprepared with dillerent AgBF4 concentration, the permeances of propylene and ethylene increase with the increase of AgBF4 concentration due to the carrier-facilitated transport, resulting in a high selectivity. But for propyl- ene/propane mixture, the mixed-gas selectivity is lower than its ideal selectivity. The hydrogen reduction strongly influences the membrane performance, which causes the decrease of propylene permeance and the increase of pro-pane permeance. With the increase of hydrogen reduction time, the membranes show a clearly color change from white to brown, yielding a great selectivity loss. The data of X-ray diffraction and FT-IR prove that silver ions are reduced to Ago after hydrogen reduction, and aggregated on the surface of PEI/Pebax2533/AgBF4 composite mem- branes.
基金Projects(U1334208,51405516,51275532) supported by the National Natural Science Foundation of ChinaProject(2015ZZTS045) supported by the Fundamental Research Funds for the Central Universities of China
文摘A numerical study of bitubular tubes with diaphragms compared with single and bitubular tubes subjected to dynamic axial impact force was presented. At first, the energy absorption response of the composite structure under axial loading was analyzed by finite element simulation. The results show that the efficiency of energy absorption can be improved by introducing diaphragms to the double-walled columns. Then, the effect of the amount and location of diaphragms, the shape and the size of the inner tubes, and the thickness of the composite structures were also studied numerically. The collision performance of the composite structure is affected by the deformation of diaphragms, as well as the interaction of outer and inner tube. The non-uniform distribution of diaphragms can improve the energy absorption efficiency of structures for a constant number of diaphragms. The specific energy absorption of the hexagonal inner tube is the highest, followed by the circular, octagonal and square ones.
基金Project(50871046)supported by the National Natural Science Foundation of ChinaProject(2007KZ09)supported by the 2007 Scienceand Technology Support Plan of Changchun City,China
文摘An organic-magnesium complex conversion(OMCC)coating on AZ91D magnesium alloy was obtained by treating in a solution containing organic compounds.SEM,FESEM and XPS were used to examine the surface morphology,thickness and structure of the conversion coatings.The results show that the continuous and uniform conversion coating is deposited on AZ91D alloy and the main component of the coatings is organic compound containing benzene ring,which forms a chemical bond with magnesium.The polarization measurement and salt spray test show that the corrosion resistance of the conversion coating is much higher than that of traditional chromate conversion coating.
基金financially supported by the National Natural Science Foundation of China(51602088)the Open Fund of the Key Laboratory of Photovoltaic and Energy Conservation Materials,Chinese Academy of Sciences(PECL2019KF007)and China Postdoctoral Science Foundation(2017T100313)。
文摘Both of planar and mesoporous architectures prevail for perovskite solar cells(PSCs).However,it is still an open question how the architecture affects the performance of PSCs.The inconsistent results in the references often create confusion.In particular,the specific roles of mesoporous frameworks are yet to be well elaborated and require further clarification.In this study,we carefully compared the properties of perovskite films and the device performances for both architectures to unravel the roles of mesoporous TiO2 framworks in CH3NH3PbI3 PSCs.The detailed characterizations of structural,microscopic,optical and electrical properties revealed that the presence of mesoporous TiO2 framework contributed to enlarged perovskite crystal sizes,enhanced light harvesting,efficient electron extration and suppressed charge recombination.As a result,compared with the planar device,the mesoporous device yielded an improved power conversion efficiency of 18.18%,coupled with a reduced hystersis.This study reveals the benefits of mesoporous TiO2 framework in PSCs and provides the guidance for the design and optimization of architectures for high-performance devices.
文摘An appropriate diameter and wire-to-wire dis- tance is critical for optimizing the performance of hybrid inorganic/organic photovoltaic devices. For a deep under- standing of their influences on such hybrid structures, the well-ordered ZnO nanowires with different diameters are fabricated by the versatile hydrothermal growth. The dependence of the photovoltaic performance on the surface states, wire diameter and wire-to-wire distance is investi- gated. We demonstrate that the pristine thick ZnO nanowires film possess a higher surface photovoltage （SPV） response than the thin one. This is mainly due to the influence of surface states on the thin ZnO nanowires, which can capture the photo-generated carriers. When the two kinds of ZnO nanowires are fabricated into a hybrid inorganic/organic structure, the thin ZnO nanowires/poly（3-hexylthiophene） hybrid film has a higher SPV response than the thick one, which is contrary to the pristine ZnO nanowires. This is benefited from the smaller diameter and wire-to-wire dis- tance of the thin ZnO nanowires owned. The crystallinity, wire diameter and wire-to-wire distance have the crucial influence on the final photovoltaic performance. The results shown here give us insights toward designing efficient hybrid photovoltaic devices.
