A novel materials design procedure based on the co-doping of metal nanoparticle and azo dye compound （MNPADC） is developed to improve the properties of functional molecules. The synthesized materials were characteri...A novel materials design procedure based on the co-doping of metal nanoparticle and azo dye compound （MNPADC） is developed to improve the properties of functional molecules. The synthesized materials were characterized by transmission electron micrograph （TEM）, ultraviolet-visible absorption spectra （UV-Vis） and fluorescence spectra （FS）. It was found that the fluorescence intensity of methyl orange （MO） was enhanced by 5 times in the aqueous composite system doped with silver nanoparticles whereas it was reduced by 15% and 20% in composite films with co-mixing and coating structures, respectively. The results indicate that the properties of functional molecules can be greatly improved in composite film with supra molecular structure and that the procedure presented here is effective.展开更多
Anodized composite films containing Si C nanoparticles were synthesized on Ti6Al4 V alloy by anodic oxidation procedure in C4O6H4Na2 electrolyte. Scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) ...Anodized composite films containing Si C nanoparticles were synthesized on Ti6Al4 V alloy by anodic oxidation procedure in C4O6H4Na2 electrolyte. Scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray photoelectron spectroscopy(XPS) were employed to characterize the morphology and composition of the films fabricated in the electrolytes with and without addition of Si C nanoparticles. Results show that Si C particles can be successfully incorporated into the oxide film during the anodizing process and preferentially concentrate within internal cavities and micro-cracks. The ball-on-disk sliding tests indicate that Si C-containing oxide films register much lower wear rate than the oxide films without Si C under dry sliding condition. Si C particles are likely to melt and then are oxidized by frictional heat during sliding tests. Potentiodynamic polarization behavior reveals that the anodized alloy with Si C nanoparticles results in a reduction in passive current density to about 1.54×10-8 A/cm2, which is more than two times lower than that of the Ti O2 film(3.73×10-8 A/cm2). The synthesized composite film has good anti-wear and anti-corrosion properties and the growth mechanism of nanocomposite film is also discussed.展开更多
Both of planar and mesoporous architectures prevail for perovskite solar cells(PSCs).However,it is still an open question how the architecture affects the performance of PSCs.The inconsistent results in the references...Both of planar and mesoporous architectures prevail for perovskite solar cells(PSCs).However,it is still an open question how the architecture affects the performance of PSCs.The inconsistent results in the references often create confusion.In particular,the specific roles of mesoporous frameworks are yet to be well elaborated and require further clarification.In this study,we carefully compared the properties of perovskite films and the device performances for both architectures to unravel the roles of mesoporous TiO2 framworks in CH3NH3PbI3 PSCs.The detailed characterizations of structural,microscopic,optical and electrical properties revealed that the presence of mesoporous TiO2 framework contributed to enlarged perovskite crystal sizes,enhanced light harvesting,efficient electron extration and suppressed charge recombination.As a result,compared with the planar device,the mesoporous device yielded an improved power conversion efficiency of 18.18%,coupled with a reduced hystersis.This study reveals the benefits of mesoporous TiO2 framework in PSCs and provides the guidance for the design and optimization of architectures for high-performance devices.展开更多
基金This work was supported by the National Natural Science Foundation of China （Grant No. 50271038）the Key Research Project Foundation of Shaanxi Normal University of China （No. 200403） Specialized Research Fund for the Doctoral Program of Higher Education of China （No. 20050698017）.
文摘A novel materials design procedure based on the co-doping of metal nanoparticle and azo dye compound （MNPADC） is developed to improve the properties of functional molecules. The synthesized materials were characterized by transmission electron micrograph （TEM）, ultraviolet-visible absorption spectra （UV-Vis） and fluorescence spectra （FS）. It was found that the fluorescence intensity of methyl orange （MO） was enhanced by 5 times in the aqueous composite system doped with silver nanoparticles whereas it was reduced by 15% and 20% in composite films with co-mixing and coating structures, respectively. The results indicate that the properties of functional molecules can be greatly improved in composite film with supra molecular structure and that the procedure presented here is effective.
基金Project(51271012)supported by the National Natural Science Foundation of China
文摘Anodized composite films containing Si C nanoparticles were synthesized on Ti6Al4 V alloy by anodic oxidation procedure in C4O6H4Na2 electrolyte. Scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS) and X-ray photoelectron spectroscopy(XPS) were employed to characterize the morphology and composition of the films fabricated in the electrolytes with and without addition of Si C nanoparticles. Results show that Si C particles can be successfully incorporated into the oxide film during the anodizing process and preferentially concentrate within internal cavities and micro-cracks. The ball-on-disk sliding tests indicate that Si C-containing oxide films register much lower wear rate than the oxide films without Si C under dry sliding condition. Si C particles are likely to melt and then are oxidized by frictional heat during sliding tests. Potentiodynamic polarization behavior reveals that the anodized alloy with Si C nanoparticles results in a reduction in passive current density to about 1.54×10-8 A/cm2, which is more than two times lower than that of the Ti O2 film(3.73×10-8 A/cm2). The synthesized composite film has good anti-wear and anti-corrosion properties and the growth mechanism of nanocomposite film is also discussed.
基金financially supported by the National Natural Science Foundation of China(51602088)the Open Fund of the Key Laboratory of Photovoltaic and Energy Conservation Materials,Chinese Academy of Sciences(PECL2019KF007)and China Postdoctoral Science Foundation(2017T100313)。
文摘Both of planar and mesoporous architectures prevail for perovskite solar cells(PSCs).However,it is still an open question how the architecture affects the performance of PSCs.The inconsistent results in the references often create confusion.In particular,the specific roles of mesoporous frameworks are yet to be well elaborated and require further clarification.In this study,we carefully compared the properties of perovskite films and the device performances for both architectures to unravel the roles of mesoporous TiO2 framworks in CH3NH3PbI3 PSCs.The detailed characterizations of structural,microscopic,optical and electrical properties revealed that the presence of mesoporous TiO2 framework contributed to enlarged perovskite crystal sizes,enhanced light harvesting,efficient electron extration and suppressed charge recombination.As a result,compared with the planar device,the mesoporous device yielded an improved power conversion efficiency of 18.18%,coupled with a reduced hystersis.This study reveals the benefits of mesoporous TiO2 framework in PSCs and provides the guidance for the design and optimization of architectures for high-performance devices.
