A Y2O3 particle enhanced Ni/TiC composite coating was fabricated in-situ on a TC4 Ti alloy by laser surface cladding. The phase component, microstructure, composition distribution and properties of the composite layer...A Y2O3 particle enhanced Ni/TiC composite coating was fabricated in-situ on a TC4 Ti alloy by laser surface cladding. The phase component, microstructure, composition distribution and properties of the composite layer were investigated. The composite layer has graded microstructures and compositions, due to the fast melting followed by rapid solidification and cooling during laser cladding. The TiC powders are completely dissolved into the melted layer during melting and segregated as fine dendrites when solidified. The size of TiC dendrites decreases with increasing depth. Y2O3 fine particles distribute in the whole clad layer. The Y2O3 particle enhanced Ni/TiC composite layer has a quite uniform hardness along depth with a maximum value of HV1380, which is 4 times higher than the initial hardness. The wear resistance of the Ti alloy is significantly improved after laser cladding due to the high hardness of the composite coating.展开更多
A wear resistant TiB-TiC reinforced TiNi-Ti2Ni intermetallic matrix composite coating（TiB-TiC/TiNi-Ti2Ni） was prepared on Ti-6.5Al-2Zr-1Mo-1V titanium alloy by the laser cladding process using Ti＋Ni＋B4C powder ble...A wear resistant TiB-TiC reinforced TiNi-Ti2Ni intermetallic matrix composite coating（TiB-TiC/TiNi-Ti2Ni） was prepared on Ti-6.5Al-2Zr-1Mo-1V titanium alloy by the laser cladding process using Ti＋Ni＋B4C powder blends as the precursor materials.Microstructure and worn surface morphologies of the coating were characterized by optical microscopy（OM）,scan electron microscopy（SEM）,X-ray diffraction（XRD）,energy dispersive X-ray analysis（EDS） and atomic force microscopy（AFM）.Wear resistance of the coating was evaluated under dry sliding wear test condition at room temperature.The results indicate that the laser clad coating has a unique microstructure composed of flower-like TiB-TiC eutectic ceramics uniformly distributed in the TiNi-Ti2Ni dual-phase intermetallic matrix.The coating exhibits an excellent wear resistance because of combined action of hard TiB-TiC eutectic ceramic reinforcements and ductile TiNi-Ti2Ni dual-phase intermetallic matrix.展开更多
Objective To search novel genes or pathways involved in the recovery process after restraint stress in rats. Methods We compared the hypothalamus transcriptional profiles of two different recovery patterns （fast reco...Objective To search novel genes or pathways involved in the recovery process after restraint stress in rats. Methods We compared the hypothalamus transcriptional profiles of two different recovery patterns （fast recovery vs slow recovery） from restraint stress in rats using oligonucleotide microarray, the recovery pattern was determined by the decrement of plasma adrenocorticotropic-hormone （ACTH） and corticosterone levels during one hour recovery period after stress. A real-time quantitative RT-PCR was applied to validate the differential expressed genes. Results Analysis of the microarray data showed that most of genes were not differentially expressed between fast recovery group and slow recovery group. Among the differentially expressed genes we found that talin, together with serine/threonine protein phosphatase PPl-beta catalytic subunit （PP-1B） and integrin α-6 precursor （VLA-6） genes, were at least 1.5 fold upregulated in the fast recovery group, while junctional adhesion molecule 1 （F11r） was 1.5 fold down-regulated in the fast recovery group. Conclusion The results implied that integrin signaling pathway may be involved in the recovery from restraint stress in rats. The present study provided a global overview of hypothalamus transcriptional profiles during the process of recovery from the restraint stress in rats. The integrin signaling pathway seems to be involved in the recovery process, which deserves further study to clarify the integrin-mediated recovery mechanism after restraint stress.展开更多
Influence of high light stress on the photosynthesis of flag leaves of indica subspecies (cv. “Shanyou 63', sensitive to photoinhibition) and japonica subspecies (cv. “Wuyujing', resistant to photoin...Influence of high light stress on the photosynthesis of flag leaves of indica subspecies (cv. “Shanyou 63', sensitive to photoinhibition) and japonica subspecies (cv. “Wuyujing', resistant to photoinhibition) of rice ( Oryza sativa L.) was comparatively investigated. In both cultivars of rice, the excitation energy distribution between two photosystems was altered and the excitation energy transfer from light harvesting chlorophyll protein complexes to PSⅡ was inhibited by high light stress. These decreases were more pronounced in indica rice cultivar as compared to japonica one. The analysis of mild SDS_PAGE showed that in indica rice, high light stress almost disaggregated the trimer of light harvesting chlorophyll protein complexes of PSⅡ (LHC Ⅱ 1). The stress reduced the contents of internal antennae chlorophyll protein complexes of PSⅡ (CPa), light harvesting chlorophyll protein of PSⅠ (CPⅠa) and Chl a protein complex of PSⅠ reaction center (CPⅠ) as well as dimer of LHCⅡ (LHCⅡ 2) in indica rice. In japonica subspecies, however, high light stress depressed the contents of LHCⅡ 1, CPa and CPⅠa, but slightly impacted on CPⅠ content. Moreover, the increase in the contents of monomer of LHCⅡ by high light stress was found in both subspecies. In consistent with above results, analysis of polypeptide indicated that the amounts of 27 kD and 25 kD polypeptide of LHCⅡ in particular, as well as that of 21 kD polypeptide of CPⅠa were reduced by high light stress in both subspecies. It was found that, comparing with japonica rice, the stress pronouncedly diminished 43 kD and 47 kD proteins of CPa and 23 kD extrisic protein in indica rice.展开更多
[Objective] This study was conducted to discuss a high efficient phytore- mediation technology for 133Cs pollution.[Method] The effects of 3 exogenous phyto- hormones on the uptake and accumulation of 133Cs in the see...[Objective] This study was conducted to discuss a high efficient phytore- mediation technology for 133Cs pollution.[Method] The effects of 3 exogenous phyto- hormones on the uptake and accumulation of 133Cs in the seedlings of Helianthus annuus L., which is a kind of hyperaccumulator plant, was further studied in the pot experiments. [Result] The results indicated that the absorption, accumulation and translocation capacities of 133Cs of the sunflower plants could be improved signifi- cantly after the application of phytohormones. 133Cs contents were higher in leaves and flowers as compared with stems and roots. The accumulation capacities of phytohormones were in order of SA〉GA〉IAA. [Conclusion] The absorption capacity, translocation factor and bioaccumulation factor of 133Cs were maximum after the展开更多
Laser-weldable Sip-SiCp/Al hybrid composites with high volume fraction （60%-65%） of SiC reinforcement were fabricated by compression moulding and vacuum gas pressure infiltration technology. Microscopic observation ...Laser-weldable Sip-SiCp/Al hybrid composites with high volume fraction （60%-65%） of SiC reinforcement were fabricated by compression moulding and vacuum gas pressure infiltration technology. Microscopic observation displayed that the Sip-SiCp/Al hybrid composites with bilayer structure were compact without gas pores and the intergradation between Sip/Al layer and SiCp/Al layer was homogeneous and continuous. Further investigation revealed that the Sip-SiCp/Al hybrid composites possessed low density （2.96 g/cm^3）, high gas tightness （1.0 mPa·cm^3）/s）, excellent thermal management function as a result of high thermal conductivity （194 W/（m·K） and low coefficient of thermal expansion （7.0×10^-6 K-1）. Additionally, Sip-SiCp/Al hybrid composites had outstanding laser welding adaptability, which is significantly important for electronic packaging applications. The gas tightness of components after laser welding （48 mPa·cm^3）/s） can well match the requirement of advanced electronic packaging. Several kinds of these precision components passed tests and were put into production.展开更多
基金Projects (51101096, 51002093) supported by the National Natural Science Foundation of ChinaProject (1052nm05000) supported by Special Foundation of the Shanghai Science and Technology Commission for Nano-Materials ResearchProject (J51042) supported by Leading Academic Discipline Project of the Shanghai Education Commission, China
文摘A Y2O3 particle enhanced Ni/TiC composite coating was fabricated in-situ on a TC4 Ti alloy by laser surface cladding. The phase component, microstructure, composition distribution and properties of the composite layer were investigated. The composite layer has graded microstructures and compositions, due to the fast melting followed by rapid solidification and cooling during laser cladding. The TiC powders are completely dissolved into the melted layer during melting and segregated as fine dendrites when solidified. The size of TiC dendrites decreases with increasing depth. Y2O3 fine particles distribute in the whole clad layer. The Y2O3 particle enhanced Ni/TiC composite layer has a quite uniform hardness along depth with a maximum value of HV1380, which is 4 times higher than the initial hardness. The wear resistance of the Ti alloy is significantly improved after laser cladding due to the high hardness of the composite coating.
基金Project (2010CB731705) supported by the National Basic Research Program of China
文摘A wear resistant TiB-TiC reinforced TiNi-Ti2Ni intermetallic matrix composite coating（TiB-TiC/TiNi-Ti2Ni） was prepared on Ti-6.5Al-2Zr-1Mo-1V titanium alloy by the laser cladding process using Ti＋Ni＋B4C powder blends as the precursor materials.Microstructure and worn surface morphologies of the coating were characterized by optical microscopy（OM）,scan electron microscopy（SEM）,X-ray diffraction（XRD）,energy dispersive X-ray analysis（EDS） and atomic force microscopy（AFM）.Wear resistance of the coating was evaluated under dry sliding wear test condition at room temperature.The results indicate that the laser clad coating has a unique microstructure composed of flower-like TiB-TiC eutectic ceramics uniformly distributed in the TiNi-Ti2Ni dual-phase intermetallic matrix.The coating exhibits an excellent wear resistance because of combined action of hard TiB-TiC eutectic ceramic reinforcements and ductile TiNi-Ti2Ni dual-phase intermetallic matrix.
文摘Objective To search novel genes or pathways involved in the recovery process after restraint stress in rats. Methods We compared the hypothalamus transcriptional profiles of two different recovery patterns （fast recovery vs slow recovery） from restraint stress in rats using oligonucleotide microarray, the recovery pattern was determined by the decrement of plasma adrenocorticotropic-hormone （ACTH） and corticosterone levels during one hour recovery period after stress. A real-time quantitative RT-PCR was applied to validate the differential expressed genes. Results Analysis of the microarray data showed that most of genes were not differentially expressed between fast recovery group and slow recovery group. Among the differentially expressed genes we found that talin, together with serine/threonine protein phosphatase PPl-beta catalytic subunit （PP-1B） and integrin α-6 precursor （VLA-6） genes, were at least 1.5 fold upregulated in the fast recovery group, while junctional adhesion molecule 1 （F11r） was 1.5 fold down-regulated in the fast recovery group. Conclusion The results implied that integrin signaling pathway may be involved in the recovery from restraint stress in rats. The present study provided a global overview of hypothalamus transcriptional profiles during the process of recovery from the restraint stress in rats. The integrin signaling pathway seems to be involved in the recovery process, which deserves further study to clarify the integrin-mediated recovery mechanism after restraint stress.
文摘Influence of high light stress on the photosynthesis of flag leaves of indica subspecies (cv. “Shanyou 63', sensitive to photoinhibition) and japonica subspecies (cv. “Wuyujing', resistant to photoinhibition) of rice ( Oryza sativa L.) was comparatively investigated. In both cultivars of rice, the excitation energy distribution between two photosystems was altered and the excitation energy transfer from light harvesting chlorophyll protein complexes to PSⅡ was inhibited by high light stress. These decreases were more pronounced in indica rice cultivar as compared to japonica one. The analysis of mild SDS_PAGE showed that in indica rice, high light stress almost disaggregated the trimer of light harvesting chlorophyll protein complexes of PSⅡ (LHC Ⅱ 1). The stress reduced the contents of internal antennae chlorophyll protein complexes of PSⅡ (CPa), light harvesting chlorophyll protein of PSⅠ (CPⅠa) and Chl a protein complex of PSⅠ reaction center (CPⅠ) as well as dimer of LHCⅡ (LHCⅡ 2) in indica rice. In japonica subspecies, however, high light stress depressed the contents of LHCⅡ 1, CPa and CPⅠa, but slightly impacted on CPⅠ content. Moreover, the increase in the contents of monomer of LHCⅡ by high light stress was found in both subspecies. In consistent with above results, analysis of polypeptide indicated that the amounts of 27 kD and 25 kD polypeptide of LHCⅡ in particular, as well as that of 21 kD polypeptide of CPⅠa were reduced by high light stress in both subspecies. It was found that, comparing with japonica rice, the stress pronouncedly diminished 43 kD and 47 kD proteins of CPa and 23 kD extrisic protein in indica rice.
文摘[Objective] This study was conducted to discuss a high efficient phytore- mediation technology for 133Cs pollution.[Method] The effects of 3 exogenous phyto- hormones on the uptake and accumulation of 133Cs in the seedlings of Helianthus annuus L., which is a kind of hyperaccumulator plant, was further studied in the pot experiments. [Result] The results indicated that the absorption, accumulation and translocation capacities of 133Cs of the sunflower plants could be improved signifi- cantly after the application of phytohormones. 133Cs contents were higher in leaves and flowers as compared with stems and roots. The accumulation capacities of phytohormones were in order of SA〉GA〉IAA. [Conclusion] The absorption capacity, translocation factor and bioaccumulation factor of 133Cs were maximum after the
文摘Laser-weldable Sip-SiCp/Al hybrid composites with high volume fraction （60%-65%） of SiC reinforcement were fabricated by compression moulding and vacuum gas pressure infiltration technology. Microscopic observation displayed that the Sip-SiCp/Al hybrid composites with bilayer structure were compact without gas pores and the intergradation between Sip/Al layer and SiCp/Al layer was homogeneous and continuous. Further investigation revealed that the Sip-SiCp/Al hybrid composites possessed low density （2.96 g/cm^3）, high gas tightness （1.0 mPa·cm^3）/s）, excellent thermal management function as a result of high thermal conductivity （194 W/（m·K） and low coefficient of thermal expansion （7.0×10^-6 K-1）. Additionally, Sip-SiCp/Al hybrid composites had outstanding laser welding adaptability, which is significantly important for electronic packaging applications. The gas tightness of components after laser welding （48 mPa·cm^3）/s） can well match the requirement of advanced electronic packaging. Several kinds of these precision components passed tests and were put into production.
