A type of waveguide ring resonator, based on Er3+/Yb3+ co-doped phosphate glass and using thermal-optical effect as tuning manner, is brought up. The ring resonator is composed of two straight waveguides and a ring wa...A type of waveguide ring resonator, based on Er3+/Yb3+ co-doped phosphate glass and using thermal-optical effect as tuning manner, is brought up. The ring resonator is composed of two straight waveguides and a ring waveguide with radius of 400 μm. Electrode is evaporated on the top of the waveguide to achieve thermal tuning. Firstly, the filtering scheme of the ring resonator is analyzed, then how parameters of the electrode influence the filtering characteristics is discussed.展开更多
New generation passive optical network aims at providing more than 100 Gb/s capacity. Thanks to recent progress enabling a variety of optical transceivers up to 40 Gb/s, many evolution possibilities to 200G PONs （pas...New generation passive optical network aims at providing more than 100 Gb/s capacity. Thanks to recent progress enabling a variety of optical transceivers up to 40 Gb/s, many evolution possibilities to 200G PONs （passive optical network） could be investigated. This work proposes two directly deployable cases of evolution to 200G PON based on the combination of these improved optical transceivers and WDM （wavelength division multiplexing）. The physical layer of the optical network has been simulated with OptiSystem software to show the communication links performances behavior when considering key components parameters in order to achieve good network design for a given area. The complexity of the proposed architectures and financial cost comparisons are also discussed.展开更多
A plastic surface-relief grating as a wavelength division multiplexer is designed and fabricated with the conventional mould pressing technique using the transmission-type fused quartz phase grating as mask pattern an...A plastic surface-relief grating as a wavelength division multiplexer is designed and fabricated with the conventional mould pressing technique using the transmission-type fused quartz phase grating as mask pattern and polycarbonate as basal material.The experiment results show that in an optimizing process,the plastic surface-relief grating has the highest firstorder diffraction efficiency under adequate groove depth and incident angle,and can be used as the best optical path for wavelength division multiplexing(WDM).We also establish the experiment setup for testing the WDM performance of the plastic surface-relief grating based wavelength division multiplexer.The results show that the proposed wavelength division multiplexer has the high-stability temperature characteristics,the low insertion loss of less than 5 dB,the large isolation of greater than 20 dB,the low polarization-dependent loss(PDL) of less than 0.4 dB and the relatively steep pass-band characteristics.It is a WDM device with good performance,which can be applied in short distance communication.展开更多
基金National Nature Science Foundation of China(60377021)Key Laboratory Foundation of National Defence(51472040205DZ0201)
文摘A type of waveguide ring resonator, based on Er3+/Yb3+ co-doped phosphate glass and using thermal-optical effect as tuning manner, is brought up. The ring resonator is composed of two straight waveguides and a ring waveguide with radius of 400 μm. Electrode is evaporated on the top of the waveguide to achieve thermal tuning. Firstly, the filtering scheme of the ring resonator is analyzed, then how parameters of the electrode influence the filtering characteristics is discussed.
文摘New generation passive optical network aims at providing more than 100 Gb/s capacity. Thanks to recent progress enabling a variety of optical transceivers up to 40 Gb/s, many evolution possibilities to 200G PONs （passive optical network） could be investigated. This work proposes two directly deployable cases of evolution to 200G PON based on the combination of these improved optical transceivers and WDM （wavelength division multiplexing）. The physical layer of the optical network has been simulated with OptiSystem software to show the communication links performances behavior when considering key components parameters in order to achieve good network design for a given area. The complexity of the proposed architectures and financial cost comparisons are also discussed.
基金supported by the Natural Science Foundation of Fujian Province of China (No.2011J01353)
文摘A plastic surface-relief grating as a wavelength division multiplexer is designed and fabricated with the conventional mould pressing technique using the transmission-type fused quartz phase grating as mask pattern and polycarbonate as basal material.The experiment results show that in an optimizing process,the plastic surface-relief grating has the highest firstorder diffraction efficiency under adequate groove depth and incident angle,and can be used as the best optical path for wavelength division multiplexing(WDM).We also establish the experiment setup for testing the WDM performance of the plastic surface-relief grating based wavelength division multiplexer.The results show that the proposed wavelength division multiplexer has the high-stability temperature characteristics,the low insertion loss of less than 5 dB,the large isolation of greater than 20 dB,the low polarization-dependent loss(PDL) of less than 0.4 dB and the relatively steep pass-band characteristics.It is a WDM device with good performance,which can be applied in short distance communication.
