Tencel纤维的生产与染整加工(上)

对 Tencel纤维的生产与染整加工作了全面论述 ,包括纤维的制造、性能 ;染整加工的难点即克服原纤化问题 ;最近开发的“四合一”加工工艺和 Tencel A1 0

Study on mechanical properties of composite materials by in-situ tensile test

The mechanical properties of the SiC fiber-reinforced Mg-Al metal matrix composite materials have been studied on internal microstructure by (scanning electron microscopy) SEM in-situ tensile test. The emergence and propagation of the crack, and the fracture behavior in materials have been observed and studied. It is found that in the case of the tensile test, the crack emerged in SiC fiber initially. In the case of the strong cohesion of the fiber-metal interface, the crack propagated in the fiber, meanwhile the fibers in the neighborhood of the cracked fiber began to crack and the Mg-Al metal deformed plastically, and at last the material fractured. Otherwise the toughness of the materials grows in the case of the lower cohesion of the fiber-metal matrix interface.

Experimental Research on Behavior of Composite Material Projectile Penetrating Concrete Target

Projectile made of carbon fiber composite material shell and metal warhead penetrates concrete target at speeds of 336,m/s,447,m/s and 517,m/s.The angles between the perpendicu-lar of target surface and projectile axis are 0°and 30°.The thickness of concrete target is 200,mm and the compression strength is 30 MPa.The experimental results indicate that the strength of composite material structure is high.Composite projectile can go through concrete tar-get without fiber segregation and breakage.The percent fill is 18.5% in the composite material projectile.It is about twice as that of metal projectile,if the density of metal is taken as 7.8,g/cm3.Comparing with metal projectile,low-density,high-strength composite material can lessen projec-tile weight,improve charge-weight ratio of detonator and enhance destructive powder.

Recurrent giant fibrovascular polyp of the esophagus

Giant fibrovascular polyps of the esophagus and hypopharynx are rare benign esophageal tumors. They arise most commonly in the upper esophagus and may, rarely, originate in the hypopharynx. They can vary significantly in size. Even though they are benign, they may be lethal due to either bleeding or, rarely, asphyxiation if a large polyp is regurgitated. Patients commonly present with dysphagia or hematemesis. The polyps may not be well visualized on endoscopy and imaging plays a vital role in aiding diagnosis as well as providing important information for preoperative planning, such as the location of the pedicle, the vascularity of the polyp and the tissue elements of the mass. They can also be recurrent in rare cases, especially if the resection margins of the base are involved. We review the recent literature and report a case of a 61-year-old man with a recurrent giant esophageal fibrovascular polyp with illustrative contrast barium swallow, CT and intra-operative images, who required several surgeries via a combination of endoscopic, trans-oral, trans-cervical, trans-thoracic and trans-abdominal approaches.

In vitro toxicologic study of chitin short fiber reinforced polycaprolactone composite

Objective: To investigate the cytotoxicity and cytocompatibility of chitin fiber reinforced polycaprolactone composite in vitro in order to provide useful scientific basis for clinical application. Methods: Cell morphology observation, MTT and DNA assay were used to evaluate the influence of the composite on the morphology, growth and proliferation of cultured L-929 cells. Results: The composite did not impair the morphology of cultured cells in vitro. MTT and DNA assay demonstrated that the growth and proliferation of the cultured cells were not significantly inhibited by the composite. Conclusion : The composites have fine cytocompatibility and are safe for clinical use of reconstruction of chest wall defects.

Deformation behavior of high performance fiber reinforced cementitious composite prepared with asphalt emulsion

A novel engineered cementitious composite(ECC) was prepared with the complex binder of Portland cement and asphalt emulsion.By adjusting the amount of asphalt emulsion,different mixture proportions were adopted in experiments,including four-point bending test,compressive test,and scanning electric microscopy(SEM).The SEM observation was conducted to evaluate the contribution of polyvinyl alcohol(PVA) fiber and asphalt emulsion to the composite toughening mechanism.The tests results show that the most remarkable deflection-hardening behavior and saturated multiple cracking are achieved when the content of asphalt emulsion is 10%.However,excessive content of asphalt emulsion causes severe damages on the deformation behavior as well as loss in compressive strength of the mixture.SEM observation indicates that the influence of asphalt emulsion on the fiber/matrix interfacial property changes the dominant fiber failure type from rupture into pull-out mode,and thus causes beneficial effects for strain-hardening behavior.

Sodium alginate-polyvinyl alcohol/polysulfone (SA-PVA/PSF) hollow fiber composite pervaporation membrane for dehydration of ethanol-water solution

Using polysulfone （PSF） hollow fiber ultrafiltration membranes as the substrate, sodium alginate （SA） and polyvinyl alcohol （PVA） blend solutions as the coating solution, and maleic anhydride （MAC） as the cross-linked agent, SAPVA/PSF hollow fiber composite membranes were prepared for the dehydration of ethanol-water. The effects of different sodium alginate concentration in the coating solutions and different operating temperatures on pervaporation performance were investigated. The experimental results showed that pervaporation performance of the SA-PVA/PSF composite membranes for ethanol-water solution exhibited a high separation factor although they had a relatively low permeation flux. As SA concentration in SA-PVA coating solution was 66.7% and the operating temperature was 40 ℃, SA-PVA/PSF hollow fiber composite membrane （PS4） had a separation factor of 886 and flux of 12.6 g/（m^2·h）. Besides, SA-PVA/PSF hollow fiber composite membranes （PS3 and PS4） were used for the investigation of the effect of ethanol concentration in the feed solution on pervaporation performance.

Enhanced apoptosis in post-liver transplant hepatitis C:Effects of virus and immunosuppressants

Hepatitis C(HCV)-infected patients have a poorer survival post-liver transplantation compared to patients transplanted for other indications,since HCV recurrence post-transplant is universal and commonly follows an aggressive course.There is increasing evidence that in the non-transplant setting,induction of hepatocyte apoptosis is one of the main mechanisms by which HCV drives liver inflammation and fibrosis,and that HCV proteins directly promote apoptosis.Recent studies have shown that post-liver transplant,there is a link between high levels of HCV replication,enhanced hepatocyte apoptosis and the subsequent development of rapidly progressive liver fibrosis.Although the responsible mechanisms remain unclear,it is likely that immunosuppressive drugs play an important role.It is well known that immunosuppressants impair immune control of HCV,thereby allowing increased viral replication.However there is also evidence that immunosuppressants may directly induce apoptosis and this may be facilitated by the presence of high levels of HCV replication.Thus HCV and immunosuppressants may synergistically interact to further enhance apoptosis and drive more rapid fibrosis.These findings suggest that modulation of apoptosis within the liver either by changing immunosuppressive therapy or the use of apoptosis inhibitors may help prevent fibrosis progression in patients with post-transplant HCV disease.

Processing and properties of 2D SiC/SiC composites by precursor infiltration and pyrolysis

Two-dimensional plain-weave silicon carbide fiber fabric reinforced silicon carbide(2D-SiC/SiC)composites were molded by stacking method and densified through precursor infiltration and pyrolysis(PIP)process.SiC coating was deposited as the fiber/matrix interphase layer by chemical vapor deposition(CVD)technique.Fiber/matrix debonding and relatively long fiber pullouts were observed on the fracture surfaces.Additionally,the flexural strength and elastic modulus of the composites with and without fiber/matrix interphase layer were investigated using three-point bending test and single-edge notched beam test.The results show that the fiber fraction and the porosity of 2D-SiC/SiC composites with and without coating are 27.2%(volume fraction)and 11.1%,and 40.7%(volume fraction)and 7.5%,respectively.And the flexural strength and elastic modulus of 2D-SiC/SiC composites with and without coating are 363.3 MPa and 127.8 GPa,and 180.2 MPa and 97.2 GPa,respectively.With a proper thickness,the coating can effectively adjust the fiber/matrix interface,thus causing a dramatic increase in the mechanical properties of the composites.

Retting of Musa sapientum Pseudostem with Pectin Decomposting Bacteria

The upper and lower portions of Musa sapientum pseudo-stem sheaths were exposed in four types of treatments： pectin decomposing bacteria, magnesium oxide （MgO）, both pectin decomposing bacteria and MgO and control. The fibre strength properties were tested using SIRIM Standard methods and colour changed using gray scale. The bioaugmentation of pectin decomposing bacteria together with MgO additions were found to enhance retting process and reduced retting periods 52% and yielded better strength on the fibres. The lower portion pseudo-stem sheaths gave the higher strength than upper portion. Colour changed showed that the bioaugmentation of pectin bacteria enhanced the degradation colouring compound in banana fibres.

Improvement of Impact Absorbed Energy of CFRPs on Adding the Nanoparticles into Epoxy Resins

The present study investigates the effect of the addition of nanoparticles into epoxy resins as the matrix on the impact absorbed energy of CFRP （carbon fiber reinforced polymer）. Impact absorbed energy is one of the main properties to evaluate the CFRP＇s performance for transportation and aerospace structures. Two types of nanoparticle, namely nanofibers and nano-silica beads, were added into the epoxy resin to improve the impact absorption capacity of the CFRP. Two modified additives and conventional epoxy resins were quantitatively compared. The impact test results showed that impact absorbed energy for nanofibers was higher than nano-silica beads, and nanofibers as the additive promoted about 11% of impact absorbed energy compared with neat epoxy resin.

Preparation and Mechanical Properties of UV⁃Assisted Filament Winding Glass Fiber Reinforced Polymer⁃Matrix Composite

This paper studied the preparation and mechanical properties of glass fiber reinforced polymer-matrix composite rings prepared by filament winding assisted by ultraviolet(UV)curing.A ray-tracing method was used to calculate the penetration ability of UV light in the resin casting,and then a typical composite ring with dual⁃curing characteristics was prepared by UV-assisted curing.The effects of winding speed and thermal initiator concentration on the distribution of fiber fraction and mechanical properties were studied.Microscopic morphology was used for the observation of the differences in fiber volume fraction.Mechanical properties tests and scanning electron micrographs were performed to investigate the failure and damage mechanisms of the composite ring samples.The ray tracing results indicate that the UV light can pass through a single yarn thickness and the energy transmitted is sufficient to cure the back side quickly.The experimental results show that the mechanical properties of the composite ring prepared in this paper are comparable to those of the heat-cured samples,which is sufficient to meet the requirements of the flywheel.

Tensile properties of strain-hardening cementitious composites containing polyvinyl-alcohol fibers hybridized with polypropylene fibers

Partially replacing polyvinyl-alcohol(PVA)fibers with polypropylene(PP)fibers in strain-hardening cementitious composites(fiber hybridization)modify certain mechanical properties of these materials.The hybridization based on the introduction of low-modulus hydrophobic polypropylene fibers improves the ductility and the strain-hardening behavior of the cementitious composites containing polyvinyl-alcohol fibers of different types(PVA-SHCC).Pull-out tests indicate that adding PP fibers increases the energy capacity of the hybrid composite with respect to the material containing only PVA fibers under tensile loading,and PP-fiber geometry(i.e.,section shape and length)is a key factor in enhancing the strain capacity.

Hygrothermal Response of Coconut Fiber Reinforced Composites

The effects of moist and temperature response of coconut fibre reinforced composite have been studied. Tensile and compression tests for samples immersed in 12.5 g/dm3 sodium hydroxide solution and without sodium hydroxide solution were performed using a universal testing machine （Monsanto tensometer）. The results from the tensile test indicate that stress is fairly proportional to strain. However, the tensile strength increases （reduction in strain）, as the soaking time increases for the treated composites. The untreated samples demonstrate reduced tensile strength compared to the treated composites under hygrothermal conditions. The conditioned samples in each case show better tensile and compressive strength compared to the untreated samples. The plant coconut fibres investigated demonstrate acceptable mechanical properties similar to the synthetic counterparts.

Histone methyltransferase TXRl is required for both H3 and H3.3lysine 27 methylation in the well-known ciliated protist Tetrahymena thermophila

DNA replication elongation is tightly controlled by histone-modifying enzymes.Our previous studies showed that the histone methytransferase TXRl(Tetrahymena Trithorax related protein 1) specifically catalyzes H3K27 monomethylation and affects DNA replication elongation in Tetrahymena thermophila.In this study,we investigated whether TXRl has a substrate preference to the canonical H3 over the replacement variant H3.3.We demonstrated by histone mutagenesis that K27 Q mutation in H3.3further aggravated the replication stress phenotype of K27 Q mutation in canonical H3,supporting H3.3 as a physiologically relevant substrate of TXRl.This result is in apparent contrast to the strong preference for canonical H3 recently reported in Arabidopsis homologues ATXR5 and ATXR6,and further corroborates the role of TXRl in DNA replication.

Enhancing polyphenol extraction from unripe apples by carbohydrate-hydrolyzing enzymes

The effects of process variables such as enzyme types, enzyme ratio, reaction temperature, pH, time, and ethanol concentration on the extraction of unripe apple polyphenol were investigated. The results indicated that Viscozyme L had the strongest effect on polyphenols extraction and was selected to study the polyphenol composition. The ratio of enzyme （Viscozyme L） to sobstrate （2 fungal beta-glucanase units （FBG）） at 0.02, reaction at pH 3.7, 50℃ for 12 h, and ethanol concentration of 70% were chosen as the most favorable extraction condition. Total phenolic content （TPC）, reducing sugar content （RSC）, and extraction yield increased by about 3, 1.5, and 2 times, respectively, compared with control. The contents ofp-coumaric acid, ferulic acid, and caffeic acid increased to 8, 4, and 32 times, respectively. The enzyme-aided polyphenol extraction process from unripe apples might be applied to food industry for enhancing bioactive compound production.

Room temperature H_2S micro-sensors with anti-humidity properties fabricated from NiO-In_2O_3 composite nanofibers

NiO-In2O3 composite nanofibers are synthesized via electrospinning and calcining techniques. Micro-sensors are fabricated by sputtering Pt electrodes on Si chips to form sensor substrates, and then spinning the NiO-In2O3 composite nanofibers onto the sensor substrate surface. The as-fabricated micro-sensors exhibit excellent H2S sensing properties at room temperature. The sensi- tivity of the micro-sensors is up to 6 when the sensors are exposed to 3 μL/L HzS, and the corresponding response and recovery times are 14 and 22 s, respectively. The micro-sensors also exhibit high selectivity and good stability. Especially, the micro-sensors can operate at various humidity conditions. The sensitivity of the micro-sensors is 3.8 to 3 μL/L HzS at 75% relative humidity. These characteristics make the micro-sensors good candidates for practical H2S sensors with high performance.

Relative humidity and temperature dependence of mechanical degradation of natural fiber composites^(?)

In this paper,the mechanical degradation of natural fiber composites is studied with the consideration of the relative humidity and the temperature.A nonlinear constitutive model is established,which employs an internal variable to describe the mechanical degradation related to the energy dissipation during moisture absorption.The existing experimental researches demonstrated that the mechanical degradation is an irreversible thermodynamic process induced by the degradation of fibers and the damages of interfaces between fiber and matrix,both of which depend on the variation of the relative humidity or the temperature.The evolution of the mechanical degradation is obtained through the determination of dissipation rates as a function of the relative humidity and the temperature.The theoretically predicted mechanical degradations are compared with experimental results of sisal fiber reinforced composites subject to different relative humidity and temperatures,and a good agreement is found.