This paper describes possibility of utilization of waste natural fibres in production of sound absorbing composites. Waste flax fibres were modified by enzymatic treatment, after which they became more short and fine....This paper describes possibility of utilization of waste natural fibres in production of sound absorbing composites. Waste flax fibres were modified by enzymatic treatment, after which they became more short and fine. This form of fibres can create good sound absorption. Preliminary studies concerned an application of cellulose fibres after enzymatic treatment as the filling of thermoplastic sound absorbing composites. The conditions of composite manufacturing process from multilayer structure （matrix nonwoven/submicrofibres layer） were developed. The influence of submicroflbres content in the composite on the scale of the improvement of its sound absorption property was investigated. Results showed that for the same conditions of the composite manufacturing process and similar composite thickness, gradual increase in content of that filling leads to adequately increase in sound absorption coefficient of the composites. The composites could be applied among others to accommodations and transport facilities.展开更多
In order to acquire LaNiO3 nanofibers with particular morphology and structure, electrospinning technique, for the first time, was successfully applied to fabricate LaNiO3 nanofibers in the paper. Polyvinyl alcohol（...In order to acquire LaNiO3 nanofibers with particular morphology and structure, electrospinning technique, for the first time, was successfully applied to fabricate LaNiO3 nanofibers in the paper. Polyvinyl alcohol（PVA）/ [La（NO3）3＋Ni（CH3COO）2] composite nanofibers were fabricated by electrospinning, and polycrystalline LaNiO3 nanofibers were prepared by calcination of the PVA/[La（NO3）3＋Ni（CH3COO）2] composite nanofibers at 6000C for 10 h. The samples were characterized by using thermogravimetric-differential thermal analysis （TG-DTA）, X-ray diffraction spectrometry（XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectrometry （FTIR）. The results showed that PVA/[La（NO3）3＋ Ni（CH3COO）2] composite nanofibers were amorphous in structure, and pure phase LaNiO3 nanofibers were trigonal with space group R3m. The surface of as-prepared composite nanofibers was smooth, and the diameter was about 200 nm. The diameter of LaNiO3 nanofibers was smaller than that of the relevant composite fibers. The surface of the LaNiO3 nanofibers becomes coarse with the increase of calcination temperatures. The diameter of LaNiO3 nanofibers was ca. 80 nm, and the length was greater than 100μm. The mass of the sample remained constant when the temperature was above 463℃, and the total mass loss percentage was 90.9%. Possible formation mechanism of LaNiO3 nanofibers was preliminarily proposed.展开更多
文摘This paper describes possibility of utilization of waste natural fibres in production of sound absorbing composites. Waste flax fibres were modified by enzymatic treatment, after which they became more short and fine. This form of fibres can create good sound absorption. Preliminary studies concerned an application of cellulose fibres after enzymatic treatment as the filling of thermoplastic sound absorbing composites. The conditions of composite manufacturing process from multilayer structure （matrix nonwoven/submicrofibres layer） were developed. The influence of submicroflbres content in the composite on the scale of the improvement of its sound absorption property was investigated. Results showed that for the same conditions of the composite manufacturing process and similar composite thickness, gradual increase in content of that filling leads to adequately increase in sound absorption coefficient of the composites. The composites could be applied among others to accommodations and transport facilities.
文摘In order to acquire LaNiO3 nanofibers with particular morphology and structure, electrospinning technique, for the first time, was successfully applied to fabricate LaNiO3 nanofibers in the paper. Polyvinyl alcohol（PVA）/ [La（NO3）3＋Ni（CH3COO）2] composite nanofibers were fabricated by electrospinning, and polycrystalline LaNiO3 nanofibers were prepared by calcination of the PVA/[La（NO3）3＋Ni（CH3COO）2] composite nanofibers at 6000C for 10 h. The samples were characterized by using thermogravimetric-differential thermal analysis （TG-DTA）, X-ray diffraction spectrometry（XRD）, scanning electron microscopy （SEM） and Fourier transform infrared spectrometry （FTIR）. The results showed that PVA/[La（NO3）3＋ Ni（CH3COO）2] composite nanofibers were amorphous in structure, and pure phase LaNiO3 nanofibers were trigonal with space group R3m. The surface of as-prepared composite nanofibers was smooth, and the diameter was about 200 nm. The diameter of LaNiO3 nanofibers was smaller than that of the relevant composite fibers. The surface of the LaNiO3 nanofibers becomes coarse with the increase of calcination temperatures. The diameter of LaNiO3 nanofibers was ca. 80 nm, and the length was greater than 100μm. The mass of the sample remained constant when the temperature was above 463℃, and the total mass loss percentage was 90.9%. Possible formation mechanism of LaNiO3 nanofibers was preliminarily proposed.
