TiC nanoparticle-reinforced Mg−4Zn−0.5Ca matrix nanocomposites were processed by combining multidirectional forging(MDF)and extrusion(EX).The grain size of the nanocomposite after MDF+EX multi-step deformation was sig...TiC nanoparticle-reinforced Mg−4Zn−0.5Ca matrix nanocomposites were processed by combining multidirectional forging(MDF)and extrusion(EX).The grain size of the nanocomposite after MDF+EX multi-step deformation was significantly decreased compared with that processed only by MDF.The average size of the recrystallized grains gradually increased after EX with increasing the number of MDF passes at 270℃.However,the grain size significantly decreased by MDF processing at 310℃.Both fine and coarse MgZn2 phases appeared in the(MDF+EX)-processed nanocomposites,and their volume fractions gradually increased with increasing the number of MDF passes before EX.Ultrahigh tensile properties(yield strength of^404 MPa,ultimate tensile strength of^450.3 MPa and elongation of^5.2%)were obtained in the nanocomposite after three MDF passes at 310℃ followed by EX.This was attributed to the refinement of the recrystallized grains,together with the improved Orowan strengthening provided by the precipitated MgZn2 particles that were generated by MDF+EX multi-step deformation.展开更多
基金Projects(51771129,51401144,51771128)supported by the National Natural Science Foundation of China,Project supported by the Outstanding Innovative Teams of Higher Learning Institutions of Shanxi,ChinaProjects(2015021067,201601D011034)supported by the Natural Science Foundation of Shanxi Province,China+1 种基金Project(201703D421039)supported by the International Cooperation in Shanxi,ChinaProject supported by the China Scholarship Council。
文摘TiC nanoparticle-reinforced Mg−4Zn−0.5Ca matrix nanocomposites were processed by combining multidirectional forging(MDF)and extrusion(EX).The grain size of the nanocomposite after MDF+EX multi-step deformation was significantly decreased compared with that processed only by MDF.The average size of the recrystallized grains gradually increased after EX with increasing the number of MDF passes at 270℃.However,the grain size significantly decreased by MDF processing at 310℃.Both fine and coarse MgZn2 phases appeared in the(MDF+EX)-processed nanocomposites,and their volume fractions gradually increased with increasing the number of MDF passes before EX.Ultrahigh tensile properties(yield strength of^404 MPa,ultimate tensile strength of^450.3 MPa and elongation of^5.2%)were obtained in the nanocomposite after three MDF passes at 310℃ followed by EX.This was attributed to the refinement of the recrystallized grains,together with the improved Orowan strengthening provided by the precipitated MgZn2 particles that were generated by MDF+EX multi-step deformation.
