A simple and cost-effective method has been developed for the fabrication of microtubular solid oxide fuel cells (MT-SOFCs). Highly asymmetric electrolyte hollow fibers composed of a thin dense skin layer and a thick ...A simple and cost-effective method has been developed for the fabrication of microtubular solid oxide fuel cells (MT-SOFCs). Highly asymmetric electrolyte hollow fibers composed of a thin dense skin layer and a thick porous substrate are first prepared by a modified phase inversion/sintering technique. The porous substrate is then formed into the anode by deposition of a Ni catalyst via an electroless plating method inside the pores while the thin dense skin layer serves directly as the electrolyte film of the fuel cells. A porous cathode layer is produced on the outer surface of the Ni-deposited hollow fibers by slurry coating and subsequent sintering to form a complete micro tubular fuel cell. The process has been employed to fabricate yttrium stabilized zirconia (YSZ) supported Ni-YSZ-YSZ-La0.6Sr0.4Co0.2Fe0.8O3-(LSCF) microtubular fuel cells. The maximum output of the resulting cells is 159.6 mW cm-2 at 800 °C when using H2 as the fuel feed and air as the oxidant.展开更多
基金supported by the National Natural Science Foundation of China (20676073)
文摘A simple and cost-effective method has been developed for the fabrication of microtubular solid oxide fuel cells (MT-SOFCs). Highly asymmetric electrolyte hollow fibers composed of a thin dense skin layer and a thick porous substrate are first prepared by a modified phase inversion/sintering technique. The porous substrate is then formed into the anode by deposition of a Ni catalyst via an electroless plating method inside the pores while the thin dense skin layer serves directly as the electrolyte film of the fuel cells. A porous cathode layer is produced on the outer surface of the Ni-deposited hollow fibers by slurry coating and subsequent sintering to form a complete micro tubular fuel cell. The process has been employed to fabricate yttrium stabilized zirconia (YSZ) supported Ni-YSZ-YSZ-La0.6Sr0.4Co0.2Fe0.8O3-(LSCF) microtubular fuel cells. The maximum output of the resulting cells is 159.6 mW cm-2 at 800 °C when using H2 as the fuel feed and air as the oxidant.
