期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
多孔钛基贱金属阳极的性能和失效机理的研究 被引量:2
1
作者 范亚卓 王昆 张颖 《新技术新工艺》 2013年第11期115-117,共3页
通过以钛金属粉末冶金技术制备的多孔过滤钛材料为基体,以涂敷Sn,Sb氧化物为中间层,再涂敷Mn(NO3)2溶液,然后进行热分解的方法制备贱金属多孔钛阳极。为了研究多孔钛基贱金属阳极在析氧领域的应用,在1mol/L的H2SO4溶液中做强化寿命测试... 通过以钛金属粉末冶金技术制备的多孔过滤钛材料为基体,以涂敷Sn,Sb氧化物为中间层,再涂敷Mn(NO3)2溶液,然后进行热分解的方法制备贱金属多孔钛阳极。为了研究多孔钛基贱金属阳极在析氧领域的应用,在1mol/L的H2SO4溶液中做强化寿命测试,电流密度为20 000A/m2。由试验结果可知,随着基体多孔钛的厚度的增加,在不改变涂层成分的条件下,多孔钛基贱金属阳极的强化寿命呈线性增加,当到达一定厚度之后,强化寿命为一定值,不再随着基材厚度的增加而增加。通过研究多孔钛基贱金属阳极失效前后的表面形貌,从表观上分析了多孔钛基贱金属阳极的失效机理。 展开更多
关键词 多孔钛阳极 失效机理 贱金属 涂层
下载PDF
Design and construction of a film of mesoporous single-crystal rutile TiO_2 rod arrays for photoelectrochemical water oxidation 被引量:2
2
作者 甄超 吴亭亭 +3 位作者 Mohammad W.Kadi Iqbal Ismail 刘岗 成会明 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 北大核心 2015年第12期2171-2177,共7页
A film of mesoporous single-crystal rutile TiO2 rod arrays supported on a transparent conductive glass substrate was synthesized with the assistance of a template layer of closely packed silica nanospheres. This film ... A film of mesoporous single-crystal rutile TiO2 rod arrays supported on a transparent conductive glass substrate was synthesized with the assistance of a template layer of closely packed silica nanospheres. This film was used as a photoanode and showed significant improvement for photoelectrochemical water oxidation compared with a reference film of nonporous single-crystal rutile TiO2rod arrays. 展开更多
关键词 TITANIA PHOTOANODE MESOPORE Single crystal Rod array
下载PDF
Improved conversion efficiency of dye-sensitized solar cells by using novel complex nanostructured TiO_2 electrodes
3
作者 ZHANG TianShu LIU LiFeng +2 位作者 YANG Fei WANG Yi KANG JinFeng 《Science China(Technological Sciences)》 SCIE EI CAS 2013年第1期115-119,共5页
A novel complex nanostructured TiO2 electrode and fabrication process were proposed and demonstrated to improve the performance of dye-sensitized solar cells(DSSCs).In the proposed process,a nanoporous TiO2 layer was ... A novel complex nanostructured TiO2 electrode and fabrication process were proposed and demonstrated to improve the performance of dye-sensitized solar cells(DSSCs).In the proposed process,a nanoporous TiO2 layer was firstly fabricated on the FTO(fluorine-doped tin oxide) conducting substrate by an anodization process,then a nanoparticulate TiO2 film was deposited on the nanoporous TiO2 layer by the screen printed method to form the complex nanostructured TiO2 electrode.The experiments demonstrated that the nanoporous TiO layer can enhance the light scattering,decrease the contact resistance between TiO2 electrode and FTO,and suppress the recombination of I3-ion with the injected electrons of FTO.The process variables are crucial to obtain the optimized performance of DSSCs.By adopting the optimized process,improved conversion efficiency of DSSCs was achieved at AM 1.5 sunlight. 展开更多
关键词 dye-sensitized solar cells conversion efficiency nanoporous TiO2 electrode anodization
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部