期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
基于多源数据方法的街道空间品质与活力耦合性研究--以广州市天河区为例
1
作者 李敏稚 范仲秀 《当代建筑》 2024年第11期98-104,共7页
本文基于马斯洛需求层次理论,构建街道空间品质评价指标体系,以广州市天河区为例,运用多源数据方法对街道空间环境进行测度,采用空间计量模型、热点分析和实地调研法对三种尺度下街道空间品质与街道活力的耦合性进行研究,旨在为粤港澳... 本文基于马斯洛需求层次理论,构建街道空间品质评价指标体系,以广州市天河区为例,运用多源数据方法对街道空间环境进行测度,采用空间计量模型、热点分析和实地调研法对三种尺度下街道空间品质与街道活力的耦合性进行研究,旨在为粤港澳大湾区同类型城市街道空间的品质评价和设计优化提供有益参考。 展开更多
关键词 多源数据方法 街道空间品质 街道活力 耦合性 广州市天河区
下载PDF
桥梁健康监测系统多源数据自动化匹配方法 被引量:1
2
作者 卢涌鑫 宋健 《广东公路交通》 2023年第2期36-41,54,共7页
为提升特大桥梁结构营运安全监测系统自动化运维水平,提出了一种采用车辆智能监测系统、ETC门架称重系统和封闭式连通管挠度测量系统的多源数据匹配方法。首先应用相似性度量方法关联车辆到时与车辆载荷数据,再利用时域影响线控制方程... 为提升特大桥梁结构营运安全监测系统自动化运维水平,提出了一种采用车辆智能监测系统、ETC门架称重系统和封闭式连通管挠度测量系统的多源数据匹配方法。首先应用相似性度量方法关联车辆到时与车辆载荷数据,再利用时域影响线控制方程分别建立单车荷载和多车荷载特征曲线,最后通过时序分析方法匹配三类数据中同一车辆目标,识别确定性目标在多源数据中唯一的对应时刻。依托国内某特大预应力混凝土连续刚构桥工程项目,介绍了该方法的实践与应用。结果表明:该方法计算结果可反映多系统间由时间偏移和延迟导致的系统误差以及多参数间不同应用场景引起的随机误差,可自动关联对比识别多源目标数据,对提高智慧交通的自动化运维水平具有一定的参考价值。 展开更多
关键词 桥梁结构营运安全监测系统 多源数据匹配方法 时域影响线控制方程 时序分析方法
下载PDF
矿产勘查中三维地形与二维影像数据集成方法研究
3
作者 王昀 王瑶培 马智民 《陇东学院学报》 2013年第3期38-40,共3页
矿产资源是国民经济发展的重要基础,而矿产勘查又是矿产资源开发的前提,因此矿产勘查尤为重要.而勘查工作的精度将会影响到后期矿产开发的实际工作.依据此点提出将三维模型与二维影像多源数据集成的方法来辅助勘查工作,该方法是基于GIS... 矿产资源是国民经济发展的重要基础,而矿产勘查又是矿产资源开发的前提,因此矿产勘查尤为重要.而勘查工作的精度将会影响到后期矿产开发的实际工作.依据此点提出将三维模型与二维影像多源数据集成的方法来辅助勘查工作,该方法是基于GIS软件来建立三维影像模型辅助二维影像的方法进行地质解译,再将三维模型与多源数据集成的方法综合运用于解译过程中,该方法增强了预测结果的科学性、准确性,进一步提高了勘查工作的精度,为后期野外实际工作起到指导性作用. 展开更多
关键词 遥感图像 三维模型 数字地形模型 多源数据集成方法
下载PDF
Integrating CART Algorithm and Multi-source Remote Sensing Data to Estimate Sub-pixel Impervious Surface Coverage:A Case Study from Beijing Municipality,China 被引量:6
4
作者 HU Deyong CHEN Shanshan +1 位作者 QIAO Kun CAO Shisong 《Chinese Geographical Science》 SCIE CSCD 2017年第4期614-625,共12页
The sub-pixel impervious surface percentage(SPIS) is the fraction of impervious surface area in one pixel,and it is an important indicator of urbanization.Using remote sensing data,the spatial distribution of SPIS val... The sub-pixel impervious surface percentage(SPIS) is the fraction of impervious surface area in one pixel,and it is an important indicator of urbanization.Using remote sensing data,the spatial distribution of SPIS values over large areas can be extracted,and these data are significant for studies of urban climate,environment and hydrology.To develop a stabilized,multi-temporal SPIS estimation method suitable for typical temperate semi-arid climate zones with distinct seasons,an optimal model for estimating SPIS values within Beijing Municipality was built that is based on the classification and regression tree(CART) algorithm.First,models with different input variables for SPIS estimation were built by integrating multi-source remote sensing data with other auxiliary data.The optimal model was selected through the analysis and comparison of the assessed accuracy of these models.Subsequently,multi-temporal SPIS mapping was carried out based on the optimal model.The results are as follows:1) multi-seasonal images and nighttime light(NTL) data are the optimal input variables for SPIS estimation within Beijing Municipality,where the intra-annual variability in vegetation is distinct.The different spectral characteristics in the cultivated land caused by the different farming characteristics and vegetation phenology can be detected by the multi-seasonal images effectively.NLT data can effectively reduce the misestimation caused by the spectral similarity between bare land and impervious surfaces.After testing,the SPIS modeling correlation coefficient(r) is approximately 0.86,the average error(AE) is approximately 12.8%,and the relative error(RE) is approximately 0.39.2) The SPIS results have been divided into areas with high-density impervious cover(70%–100%),medium-density impervious cover(40%–70%),low-density impervious cover(10%–40%) and natural cover(0%–10%).The SPIS model performed better in estimating values for high-density urban areas than other categories.3) Multi-temporal SPIS mapping(1991–2016) was conducted based on the optimized SPIS results for 2005.After testing,AE ranges from 12.7% to 15.2%,RE ranges from 0.39 to 0.46,and r ranges from 0.81 to 0.86.It is demonstrated that the proposed approach for estimating sub-pixel level impervious surface by integrating the CART algorithm and multi-source remote sensing data is feasible and suitable for multi-temporal SPIS mapping of areas with distinct intra-annual variability in vegetation. 展开更多
关键词 impervious surface impervious surface percentage classification and regression tree(CART) sub-pixel sub-pixel impervious surface percentage(SPIS) time series
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部