Porous FeAl-based intermetallics were fabricated by thermal explosion（TE） from Fe and Al powders. The effects of sintering temperature on phase constitution, pore structure and oxidation resistance of porous Fe-Al i...Porous FeAl-based intermetallics were fabricated by thermal explosion（TE） from Fe and Al powders. The effects of sintering temperature on phase constitution, pore structure and oxidation resistance of porous Fe-Al intermetallics were systematically investigated. Porous Fe-Al materials with high open porosity（65%） are synthesized via a low-energy consumption method of TE at a temperature of 636 ℃ and FeAl intermetallic is evolved as dominant phase in sintered materials at 1000 ℃. The porous materials are composed of interconnected skeleton, large pores among skeleton and small pores in the interior of skeleton. The interstitial pores in green powder compacts are the important source of large pores of porous Fe-Al intermetallics, and the in-situ pores from the melting and flowing of aluminum powders are also significant to the formation of large pores. Small pores are from the precipitation of Fe-Al intermetallics particles. In addition, the porous specimens exhibit high resistance to oxidation at 650 ℃ in air.展开更多
The pressure increasing process within a twin screw multiphase pump, under the condition of high gas volume fractions (GVFs), induces large temperature and pressure changes that cause the rotors to deform. Rotor defor...The pressure increasing process within a twin screw multiphase pump, under the condition of high gas volume fractions (GVFs), induces large temperature and pressure changes that cause the rotors to deform. Rotor deformations heavily influence the backflow of the multiphase fluid through clearances within the twin screw multiphase pump and these deformations may even lead to pump failures. An accurate temperature and pressure distribution on the screw rotors need be obtained before the deformation analysis can be carried out. By means of small temperature and pressure sensors embedded into the groove at the root of the rotors, the temperatures of 12 points on the rotors and the pressure distributions of a twin screw multiphase pump under high GVFs conditions were recorded. Temperature test results were adopted to perform a heat transfer analysis for determining the temperature distribution on the screw rotors. Then deformation analyses, including thermal deformation, force deformation, and total deformation, were conducted according to the pressure and temperature distributions. Deformation analysis for different materials was also conducted under the same boundary conditions. A material was suggested for the manufacturing of rotors in a twin screw multiphase pump under the condition of high gas volume fractions.展开更多
基金Project(51574241)supported by the National Natural Science Foundation of ChinaProject(51611130064)supported by the Bilateral Project of NSFC-STINTProject(2015QN004)supported by the Program for Innovation Research Team of China University of Mining and Technology
文摘Porous FeAl-based intermetallics were fabricated by thermal explosion（TE） from Fe and Al powders. The effects of sintering temperature on phase constitution, pore structure and oxidation resistance of porous Fe-Al intermetallics were systematically investigated. Porous Fe-Al materials with high open porosity（65%） are synthesized via a low-energy consumption method of TE at a temperature of 636 ℃ and FeAl intermetallic is evolved as dominant phase in sintered materials at 1000 ℃. The porous materials are composed of interconnected skeleton, large pores among skeleton and small pores in the interior of skeleton. The interstitial pores in green powder compacts are the important source of large pores of porous Fe-Al intermetallics, and the in-situ pores from the melting and flowing of aluminum powders are also significant to the formation of large pores. Small pores are from the precipitation of Fe-Al intermetallics particles. In addition, the porous specimens exhibit high resistance to oxidation at 650 ℃ in air.
基金Project supported by the National High-Tech R&D Program (863) of China (No. 2007AA05Z208)the Scientific Research Foundation for Returned Scholars (No. 50706034), China
文摘The pressure increasing process within a twin screw multiphase pump, under the condition of high gas volume fractions (GVFs), induces large temperature and pressure changes that cause the rotors to deform. Rotor deformations heavily influence the backflow of the multiphase fluid through clearances within the twin screw multiphase pump and these deformations may even lead to pump failures. An accurate temperature and pressure distribution on the screw rotors need be obtained before the deformation analysis can be carried out. By means of small temperature and pressure sensors embedded into the groove at the root of the rotors, the temperatures of 12 points on the rotors and the pressure distributions of a twin screw multiphase pump under high GVFs conditions were recorded. Temperature test results were adopted to perform a heat transfer analysis for determining the temperature distribution on the screw rotors. Then deformation analyses, including thermal deformation, force deformation, and total deformation, were conducted according to the pressure and temperature distributions. Deformation analysis for different materials was also conducted under the same boundary conditions. A material was suggested for the manufacturing of rotors in a twin screw multiphase pump under the condition of high gas volume fractions.
