期刊文献+
共找到23篇文章
< 1 2 >
每页显示 20 50 100
北京某复杂多连体结构体系结构设计与分析
1
作者 刘旻 王冠 +1 位作者 张路 郭强 《建筑结构》 北大核心 2023年第S01期160-164,共5页
北京生物制药厂房项目,共3个结构单体,地上四层,结构体系为框架-剪力墙结构体系与钢框架结构体系,剪力墙沿交通核布置。首先对结构基础选型及采取的相关措施进行了分析。对结构选型进行了论证,选取了合理的结构体系及基础方案。介绍了... 北京生物制药厂房项目,共3个结构单体,地上四层,结构体系为框架-剪力墙结构体系与钢框架结构体系,剪力墙沿交通核布置。首先对结构基础选型及采取的相关措施进行了分析。对结构选型进行了论证,选取了合理的结构体系及基础方案。介绍了创新型结构超长弱连接结构体系的选取,针对新型超长弱连接结构体系进行了充分分析论证并采取了有效的结构加强措施。对结构的安全性进行了验证。研究结果标明,本项目的结构选型合理,基础部分采用了精细化分析节约了建设成本,结构设计安全合理新颖。 展开更多
关键词 多连体 超长 弱连接
下载PDF
复杂多连体大跨度结构的风压与等效静风荷载模拟和分析 被引量:8
2
作者 马宁 汪汛 +3 位作者 周岱 朱飞 王子通 洪荣华 《上海交通大学学报》 EI CAS CSCD 北大核心 2016年第3期351-356,363,共7页
以上海世博会后的世博博物馆"欢庆之云"复杂形体大跨度新建工程为背景对象,运用数值模拟方法,研究在不同风向角来风且存在周边建筑风场干扰的情形下,表面曲率多变的多连体大跨空间建筑结构的表面风压、阵风系数和等效静风荷载... 以上海世博会后的世博博物馆"欢庆之云"复杂形体大跨度新建工程为背景对象,运用数值模拟方法,研究在不同风向角来风且存在周边建筑风场干扰的情形下,表面曲率多变的多连体大跨空间建筑结构的表面风压、阵风系数和等效静风荷载.对风压云图和分区域风压系数进行了分析,并基于峰值因子法求解阵风系数,进而提出了考虑最不利风向角的等效静风荷载. 展开更多
关键词 多连体结构 风压分布 阵风系数 等效静风荷载
下载PDF
多连体结构的有限元网格剖分 被引量:3
3
作者 姜鲁珍 文献民 《河北建筑科技学院学报》 2000年第1期5-7,共3页
提供了一种实现多连体结构有限元网格剖分的途径,提出了以相贯线为出发点的剖分思 想,解决了确定相贯线的若干问题,实现了多连体结构的有限元网格的参数化剖分.
关键词 有限元 多连体结构 网格剖分 空间飞行器 桁架
下载PDF
西安站改多连体结构弹塑性分析与振动台试验 被引量:1
4
作者 蔡玉军 《结构工程师》 2021年第1期113-119,共7页
西安站改东配楼为一不规则的多连体结构,采用框架-剪力墙结构体系,通过SAP2000软件进行了三维弹塑性时程分析,揭示出薄弱部位及构件,进行重点加强和配筋设计。在数值分析的基础上,进行了1∶10的整体缩尺模型振动台试验,以得到结构的动... 西安站改东配楼为一不规则的多连体结构,采用框架-剪力墙结构体系,通过SAP2000软件进行了三维弹塑性时程分析,揭示出薄弱部位及构件,进行重点加强和配筋设计。在数值分析的基础上,进行了1∶10的整体缩尺模型振动台试验,以得到结构的动力特征、扭转位移响应、罕遇地震作用下多连体结构的变形协调关系、薄弱区域及破坏机制。试验结果表明:多连体结构薄弱部位主要集中在小三角区及支撑跨缝桁架的框架梁、柱构件处;在8度设防地震作用下梁柱裂缝开展较少,可满足“中震可修”的设防目标;在8度及超8度罕遇地震作用下,各单体框架梁端形成塑性铰,结构进入塑性状态,但各单体的层间位移均满足规范限值要求,符合“大震不倒”的抗震要求。 展开更多
关键词 多连体结构 弹塑性分析 振动台试验 动力特性
下载PDF
带多连体的复杂高层结构设计
5
作者 苏项庭 冯永伟 洪渊 《浙江建筑》 2016年第9期17-19,29,共4页
介绍了一幢具有三处连接体的复杂高层建筑的结构设计,重点说明了转换桁架的设计要点,以及横置H型钢在转换桁架中的应用及型钢混凝土节点的设计,最后总结了此类结构应采取的抗震加强措施。
关键词 转换桁架 横置H型钢 多连体结构
下载PDF
多连体分配规律探究及变式应用
6
作者 吴文肖 《理科考试研究》 2019年第17期37-40,共4页
本文以多体连接模型展开探究,归纳出系统合力、动量、动能损耗分配规律,并对'连接体'问题中高频考点问题进行变式应用,为读者研究多体模型提供技巧思路.
关键词 多连体 合力 动量 动能损耗 变式
下载PDF
复杂错层大跨多连体高层建筑的结构分析 被引量:1
7
作者 孙学华 老浩寅 +1 位作者 武云鹏 郭峰 《建筑结构》 CSCD 北大核心 2022年第S02期526-532,共7页
本工程平面呈中空的不规则四边形,建筑主要特点为主楼的立面竖向不贯通,形成立面中空的连体建筑。该项目整体结构由四个塔楼+五个连体交错组成,采用钢框架-中心支撑+连体钢桁架体系,为具有不规则性质的复杂错层大跨多连体结构。采用基... 本工程平面呈中空的不规则四边形,建筑主要特点为主楼的立面竖向不贯通,形成立面中空的连体建筑。该项目整体结构由四个塔楼+五个连体交错组成,采用钢框架-中心支撑+连体钢桁架体系,为具有不规则性质的复杂错层大跨多连体结构。采用基于性能的抗震设计方法,根据构件的重要程度采用不同的性能目标。通过小震反应谱法弹性分析和弹性时程分析、中大震等效弹性分析以及大震弹塑性分析可知,结构整体和构件的抗震性能达到设计的预期目标,并根据结构的具体受力状况对关键构件进行了局部加强。此外,对连体桁架和塔楼连接节点、连体部分楼板的舒适度以及整体结构的抗连续倒塌进行了补充分析。 展开更多
关键词 连体钢桁架 复杂错层大跨多连体 振动舒适度 抗连续倒塌
下载PDF
某复杂多连体大跨结构关键问题研究
8
作者 吴逸枫 李智芳 +4 位作者 陈强 纪晗 李宏胜 景文俊 代向阳 《建筑结构》 CSCD 北大核心 2022年第S02期519-525,共7页
赣州某科创城工程属于体型复杂的多连体大跨混合结构,建筑由三栋单体通过5、6层楼盖及屋盖连为一体,楼面最大跨度45.8m。对大跨楼盖及屋盖进行了“上抬”、“悬挂”及混合方案的比选,结合建筑美观性及结构经济性最终选择了“上抬”方案... 赣州某科创城工程属于体型复杂的多连体大跨混合结构,建筑由三栋单体通过5、6层楼盖及屋盖连为一体,楼面最大跨度45.8m。对大跨楼盖及屋盖进行了“上抬”、“悬挂”及混合方案的比选,结合建筑美观性及结构经济性最终选择了“上抬”方案。对多连体各单元之间进行了多种连接方案的比选,最终选择塔1与塔2之间采用强连接,AB区之间采用弱连接,在保证结构刚度及安全性的前提下提高了结构的经济性。针对大跨楼盖及多连体结构进行了一系列的分析设计,表明结构满足极限及正常使用状态承载力需求,并进行了特殊的加强措施,进一步保证了结构的安全性。 展开更多
关键词 多连体结构 大跨桁架 混合结构 弱连接 摩擦摆支座 人行舒适度
下载PDF
多连体筒壁液压滑模整体同步提升集成技术 被引量:7
9
作者 黄正荣 《建筑技术》 2014年第8期699-702,共4页
钢筋混凝土筒壁由单体向多连体(筒中筒)组合发展,其滑模施工要面临操作平台系统、模板系统、液压提升系统、施工测量控制系统、配电系统以及施工作业组织配置等全面的技术攻关与集成创新。涉及到的关键技术包括:荷载设计计算;液压千斤... 钢筋混凝土筒壁由单体向多连体(筒中筒)组合发展,其滑模施工要面临操作平台系统、模板系统、液压提升系统、施工测量控制系统、配电系统以及施工作业组织配置等全面的技术攻关与集成创新。涉及到的关键技术包括:荷载设计计算;液压千斤顶选型、起重量与支承杆承载力分析及数量配置;液压设备系统试验;支承杆空滑加固技术;钢筋定位、混凝土下料和浇筑技术;滑升速度及行程控制;滑模施工监测及纠偏技术等的研究和应用。 展开更多
关键词 多连体筒壁 液压滑模 整体同步提升 集成技术
下载PDF
多连体方仓滑模混凝土分料平台的应用
10
作者 熊继承 《建筑技术开发》 2019年第20期110-111,共2页
益海(周口)小麦工业有限公司二期小麦制粉加工项目中,粉仓80连体方仓在滑模施工工艺进行仓体结构施工过程中,应用混凝土分料平台进行多连体方仓仓壁混凝土浇筑的方案,保证滑模施工过程的连续性及结构完整性,确保结构外观质量优良。介绍... 益海(周口)小麦工业有限公司二期小麦制粉加工项目中,粉仓80连体方仓在滑模施工工艺进行仓体结构施工过程中,应用混凝土分料平台进行多连体方仓仓壁混凝土浇筑的方案,保证滑模施工过程的连续性及结构完整性,确保结构外观质量优良。介绍滑模施工混凝土分料平台的施工要点及流程,希望能为同类工程施工作业的开展提供一定的参考。 展开更多
关键词 多连体仓方仓 滑模施工 连续性 混凝土分料平台
下载PDF
筒仓连体滑膜施工技术研究与应用 被引量:2
11
作者 郭建理 武光辉 +2 位作者 林建成 何涛 任军产 《科技创新与应用》 2012年第22期2-2,共1页
文章以大直径筒仓为例,详细介绍了筒仓多连体滑模装置选型、组装,滑膜施工及纠偏方法。
关键词 筒仓 多连体 滑膜施工
下载PDF
大型水泥厂连体圆形筒仓滑模施工技术 被引量:2
12
作者 李新宇 李东凯 +3 位作者 邓岩 韩宗慧 李军 薛跃文 《建筑技术开发》 2012年第10期47-51,共5页
在水泥厂土建工程中,圆形仓构筑物根据储量有单体仓、二连体、四连体、六连体。高度50~62 m,直径有18~22.5 m,壁厚220~800 mm。简仓筒壁采用滑模施工。连体圆形筒仓滑模与单体仓滑模施工略有不同。以四连体筒仓滑模施工为例,结合单... 在水泥厂土建工程中,圆形仓构筑物根据储量有单体仓、二连体、四连体、六连体。高度50~62 m,直径有18~22.5 m,壁厚220~800 mm。简仓筒壁采用滑模施工。连体圆形筒仓滑模与单体仓滑模施工略有不同。以四连体筒仓滑模施工为例,结合单体仓施工工序,将连体仓各仓体各工序工程量进行均衡,提高钢筋绑扎和埋件安装质量,重点协调混凝土供应速度,使各仓体混凝土供应平衡,通过调整混凝土浇筑顺序保证混凝土出模强度一致,为滑模平台同步提升创造条件。连体筒仓同时滑升时千斤顶数量多,油路长,供油和回油量大,采用两套油路的双控制系统,即液压控制柜并联使用,顶升时两台控制柜开停机步调要一致;通过调整油路长度、油量供应等达到连体筒仓提升系统的同步提升,保证连体仓施工的同步。该技术具有施工速度快、观感质量好,施工无施工缝等优点。 展开更多
关键词 圆形仓构筑物 多连体 滑模平台同步提升 液压控制柜并联
下载PDF
Media Independent Handover Scheme with QoS Provision across UMTS and WiMAX Networks 被引量:1
13
作者 Xu Yihan Chee-Onn Chow +1 位作者 Khong-Neng Choong Hiroshi Ishii 《China Communications》 SCIE CSCD 2012年第7期55-70,共16页
The rapid growth and innovation of the various mobile communication technologies have caused a change in the paradigm of internet access. Wireless technologies such as WiM AX, WiFi and UM T S/LTE networks have shown g... The rapid growth and innovation of the various mobile communication technologies have caused a change in the paradigm of internet access. Wireless technologies such as WiM AX, WiFi and UM T S/LTE networks have shown great p otential in dominating the wireless access markets. The ex istence of various access technologies requires a means for seamless internetworking to provide an ywhere, anytime services without interruption in the ongoing session, especially in multimedia 展开更多
关键词 IEEE 802.21 vertical handover Quality of Services (QoS) provision heterogeneous network
下载PDF
SHEsis,a powerful software platform for analyses of linkage disequilibrium,haplotype construction,and genetic association at polymorphism loci 被引量:382
14
作者 Yong Yong SHI Lin HE 《Cell Research》 SCIE CAS CSCD 2005年第2期97-98,共2页
In multiloci-based genetic association studies of complex diseases, a powerful and high efficient tool for analyses oflinkage disequilibrium (LD) between markers, haplotype distributions and many chi-square/p values w... In multiloci-based genetic association studies of complex diseases, a powerful and high efficient tool for analyses oflinkage disequilibrium (LD) between markers, haplotype distributions and many chi-square/p values with a large numberof samples has been sought for long. In order to achieve the goal of obtaining meaningful results directly from raw data,we developed a robust and user-friendly software platform with a series of tools for analysis in association study withhigh efficiency. The platform has been well evaluated by several sets of real data. 展开更多
关键词 SOFTWARE linkage disequilibrium haplotype analysis genetic association study.
下载PDF
Effects of pore size and porosity of surface-modified porous titanium implants on bone tissue ingrowth 被引量:12
15
作者 Jing-pu ZHENG Liang-jian CHEN +3 位作者 Dai-yuan CHEN Chun-sheng SHAO Man-fei YI Bo ZHANG 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2019年第12期2534-2545,共12页
The effects of surface-modified porous titanium implants with different porosities and pore sizes on osseointegration were investigated in vivo.Three porous titanium implants(A30,A40 and A50 containing volume fraction... The effects of surface-modified porous titanium implants with different porosities and pore sizes on osseointegration were investigated in vivo.Three porous titanium implants(A30,A40 and A50 containing volume fractions of space-holder NaCl being 30%,40%and 50%,respectively)were manufactured by metal injection moulding(MIM).The surface-modified implants were implanted into muscles and femurs of hybrid male dogs.Interface osteogenic activity and histological bone ingrowth of porous titanium implants were evaluated at 28,56 and 84 d.The results showed that when additive space-holder amount of NaCl increased from 30%to 50%(volume fraction),the general porosity and mass fraction of macropores of porous titanium rose from 42.4%to 62.0%and from 8.3%to 69.3%,respectively.Histologic sections and fluorescent labeling showed that the A50 implant demonstrated a significantly higher osteogenic capacity at 28 d than other implants.Bone ingrowth into the A30 implant was lower than that into other implants at 84 d.Therefore,the pore structure of A50 implant was suitable for new bone tissue to grow into porous implant. 展开更多
关键词 porous titanium implant POROSITY aperture INTERCONNECTIVITY OSSEOINTEGRATION
下载PDF
Balance Mechanism Design of Single Cylinder Engine Based on Continuous Mass Distribution of Connecting Rod 被引量:3
16
作者 杨陈 郝志勇 郑光泰 《Transactions of Tianjin University》 EI CAS 2009年第4期255-259,共5页
For a single cylinder engine, the total unbalanced inertial forces occur in the engine block, which results in engine’s vibration and deteriorated noise. In order to eliminate the unbalanced forces, counterweight and... For a single cylinder engine, the total unbalanced inertial forces occur in the engine block, which results in engine’s vibration and deteriorated noise. In order to eliminate the unbalanced forces, counterweight and primary balance shaft should be attached to the cylinder block so that engine durability and ride comfortability may be further improved. Traditionally one third of connecting rod assembly’s mass is treated as reciprocating mass, and two thirds as rotating mass when designing balance mechanism. In this paper, a new method based on the multibody dynamics simulation is introduced to separate the reciprocating mass and rotating mass of connecting rod assembly. The model consists of crankshaft, connecting rod, piston and the simulation is performed subsequently. According to the simulation results of the main bearing loads, the reciprocating mass and rotating mass are separated. Finally a new balance mechanism is designed and simulation results show that it completely balances inertial forces to improve the engine’s noise vibration and harshness performance. 展开更多
关键词 multibody dynamics reciprocating inertial force rotating inertial force primary balance shaft
下载PDF
A Research for a Division of Regular Polyhedron by Rhombic Dodecahedron
17
作者 Jun Hee Mun Jong Youll Park 《Journal of Mathematics and System Science》 2014年第8期569-573,共5页
Abstract:A space-filling polyhedron is a polyhedron which 'tile' space, analogous to the way of certain polygons tiled the plane. The cube is the unique space-filling platonic solid. If we make line connections the... Abstract:A space-filling polyhedron is a polyhedron which 'tile' space, analogous to the way of certain polygons tiled the plane. The cube is the unique space-filling platonic solid. If we make line connections the center with the vertices in the certain cube, the cube is divided into six pyramids. And if we glued six pyramids to the faces of the cube, we obtain a 'rhombic dodecahedron'. Since cubes are packing a space, rhombic dodecahedra are also space-filling polyhedra and a rhombic dodecahedron is divided into two regular tetrahcdra and one regular octahedron. In this study, we present how rhombic dodecahedron can be split into tetrahedra and octahedron. In this process, we can research a variety of divisions of regular polyhedron. 展开更多
关键词 Rhombic dodecahedron CUBE TETRAHEDRON octahedron.
下载PDF
Improving Continuous-Variable Measurement-Device-Independent Multipartite Quantum Communication with Optical Amplifiers 被引量:1
18
作者 郭迎 赵微 +3 位作者 李飞 黄端 廖骎 谢才浪 《Communications in Theoretical Physics》 SCIE CAS CSCD 2017年第8期191-200,共10页
The developing tendency of continuous-variable (CV) measurement-device-independent (MDI) quantum cryptography is to cope with the practical issue of implementing sealable quantum networks. Up to now, most theoreti... The developing tendency of continuous-variable (CV) measurement-device-independent (MDI) quantum cryptography is to cope with the practical issue of implementing sealable quantum networks. Up to now, most theoretical and experimental researches on CV-MDI QKD are focused on two-party protocols. However, we suggest a CV-MDI multipartite quantum secret sharing (QSS) protocol use the EPR states coupled with optical amplifiers. More remarkable, QSS is the real application in multipartite CV-MDI QKD, in other words, is the concrete implementation method of multipartite CV-MDI QKD. It can implement a practical quantum network scheme, under which the legal participants create the secret correlations by using EPR states connecting to an untrusted relay via insecure links and applying the multi-entangled Greenberger-Horne-Zeilinger (GHZ) state analysis at relay station. Even if there is a possibility that the relay may be completely tampered, the legal participants are still able to extract a secret key from network communication. The numerical simulation indicates that the quantum network communication can be achieved in an asymmetric scenario, fulfilling the demands of a practical quantum network. Additionally, we illustrate that the use of optical amplifiers can compensate the partial inherent imperfections of detectors and increase the transmission distance of the CV-MDI quantum system. 展开更多
关键词 continuous-variable quantum network Greenberger Horne Zeilinger state optical amplifier
原文传递
CONSENSUS DESIGN FOR CONTINUOUS-TIME MULTI-AGENT SYSTEMS WITH COMMUNICATION DELAY 被引量:4
19
作者 WANG Zhenhua YOU Keyou +1 位作者 XU Juanjuan ZHANG Huanshui 《Journal of Systems Science & Complexity》 SCIE EI CSCD 2014年第4期701-711,共11页
This paper investigates a consensus design problem for continuous-time first-order multiagent systems with uniform constant communication delay.Provided that the agent dynamic is unstable and the diagraph is undirecte... This paper investigates a consensus design problem for continuous-time first-order multiagent systems with uniform constant communication delay.Provided that the agent dynamic is unstable and the diagraph is undirected,sufficient conditions are derived to guarantee consensus.The key technique is the adoption of historical input information in the protocol.Especially,when agent's own historical input information is used in the protocol design,the consensus condition is constructed in terms of agent dynamic,communication delay,and the eigenratio of the network topology.Simulation result is presented to validate the effectiveness of the theoretical result. 展开更多
关键词 Communication delay consensus protocol eigenratio historical input information multi-agent systems.
原文传递
Coronarenes: recent advances and perspectives on macrocyclic and supramolecular chemistry 被引量:2
20
作者 Mei-Xiang Wang 《Science China Chemistry》 SCIE EI CAS CSCD 2018年第8期993-1003,共11页
Synthetic macrocyclic host molecules always play an essential role in the establishment and development of supramolecular chemistry. Along with the continuous interests in the study of classical macrocycles, recent de... Synthetic macrocyclic host molecules always play an essential role in the establishment and development of supramolecular chemistry. Along with the continuous interests in the study of classical macrocycles, recent decades have witnessed the emergence and rapid development of the chemistry and supramolecular chemistry of novel and functional macrocycles. Owing to their easy availability, a self-tunable V-shaped cavity resulted from 1,3-alternate conformation, and diversified electronic features steered by the interplay between heteroatom linkages and aromatic rings, heteracalixaromatics act as a type of versatile and powerful macrocyclic hosts in molecular recognition and fabrication of supramolecular systems. Very recently, by means of engineering the bond connectivity or the recombination of chemical bonds within heteracalixaromatics, we have devised coronarenes, a new generation of macrocycles. In this concise review, macrocyclic and supramolecular chemistry of coronarenes are summarized in the order of their syntheses, structural features, molecular recognition and self-assembly properties. In the last part of this article, personal perspectives on the study of macrocyclic and supramolecular chemistry will also be discussed. 展开更多
关键词 coronarenes heteracalixaromatics macrocycles molecular recognition non-covalent bond INTERACTIONS
原文传递
上一页 1 2 下一页 到第
使用帮助 返回顶部