老大变法

1999年4月,国家电力公司本部初步完成了它的第二步改革,运营体制和内部结构都发生了大的变化。据统计自1993年以来电力系统计算机硬件的配置量每年以20％的速度增长,今明两年仅在网络设备和电视会议系统中将投资4000万元人民币,为此我们采访了国家电力公司信息中心主任助理王继业。

WTO推动“大变法”

"官本位"和"人治"走不通了中国在入世协议中已经承诺,要对国内法律进行系统性的修正.对于与WTO协定和议定书草案中的义务不相符合的行政法规与部门规章,中央政府将及时修改或者取消。

Equal channel angular extrusion of NiTi shape memory alloy tube

As a new attempt, equal channel angular extrusion （ECAE） of nickel-titanium shape memory alloy （NiTi SMA） tube was investigated by means of process experiment, finite element method （FEM） and microscopy. NiTi SMA tube with the steel core in it was inserted into the steel can during ECAE of NiTi SMA tube. Based on rigid-viscoplastic FEM, multiple coupled boundary conditions and multiple constitutive models were used for finite element simulation of ECAE of NiTi SMA tube, where the effective stress field, the effective strain field and the velocity field were obtained. Finite element simulation results are in good accordance with the experimental ones. Finite element simulation results reveal that the velocity field shows the minimum value in the corner of NiTi SMA tube, where severe shear deformation occurs. Microstructural observation results reveal that severe plastic deformation leads to a certain grain orientation as well as occurrence of substructures in the grain interior and dynamic recovery occurs during ECAE of NiTi SMA tube. ECAE of NiTi SMA tube provides a new approach to manufacturing ultrafine-grained NiTi SMA tube.

Updating method of a high-speed maglev guideway model based on wavelet transform

The structure of a high-speed maglev guideway is taken as the research object.With the aim of identifying the inconsistency of modal parameters between the simulation model and the actual model,and based on the 600 km/h high-speed maglev vehicle and the high-speed maglev test line,the arrangement of sensors and the vibration acceleration data collection of the 12.384 m concrete guideway were conducted.The modal parameters were identified from the guideway response signal using wavelet transform,after which the wavelet ridge was extracted by using the maximum slope method.Next,the vibration modes and frequency parameters of the interaction vibration characteristics of the high-speed maglev guideway and 600 km/h maglev vehicle were analyzed.The updating objective function for the finite element model of the guideway was established,and the initial guideway finite element model was modified and updated by repeatedly iterating the parameters.In doing so,the model structure of the high-speed maglev guideway was obtained,which is consistent with the actual structure.The accuracy of the updated guideway model in the calculation of the dynamic response was verified by combining this with the vehicle-guideway coupling dynamic model of the high-speed maglev system with 18 degrees of freedom.The research results reveal that the model update method based on the wavelet transform and the maximum slope method has the characteristics of high accuracy and fast recognition speed.This can effectively obtain an accurate guideway model that ensures the correctness of the vehicle-guideway coupling dynamic analysis and calculation while meeting the parameters of the measured structure model.This method is also suitable for updating other structural models of high-speed maglev systems.

Calculation of all-time apparent resistivity of large loop transient electromagnetic method with very fast simulated annealing

In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position information of measuring point.Utilizing very fast simulated annealing(VFSA) to fit the theoretical electromagnetic force(EMF) and measured EMF could obtain the all-time apparent resistivity of the measuring points in rectangular transmitting loop.The selective cope of initial model of VFSA could be confirmed by taking the late time apparent resistivity of transient electromagnetic method as the prior information.For verifying the correctness,the all-time apparent resistivities of the geoelectric models were calculated by VFSA and dichotomy,respectively.The results indicate that the relative differences of apparent resistivities calculated by these two methods are within 3%.The change of measuring point position has little influence on the tracing pattern of all-time apparent resistivity.The first branch of the curve of all-time apparent resistivity is close to the resistivity of the first layer medium and the last branch is close to the resistivity of the last layer medium,which proves the correctness of the arithmetics proposed.

RECURSIVE FILTERING RADON-AMBIGUITY TRANSFORM ALGORITHM FOR DETECTING MULTI-LFM SIGNALS

In multi-LFM signal condition, Radon-Ambiguity Transform (RAT) of the strong LFM component has strong suppression effect on that of the weak LFM component. A method named as Recursive Filtering RAT (RFRAT) algorithm is proposed for solving this problem. By fully using of the Maximum Likelihood (ML) estimation value of the frequency modulation rate got by RAT, RFRAT can detect the noisy multi-LFM signals out step by step. The merit of this new method is validated by an illustrative example in low Signal-to-Noise-Ratio (SNR) condition.

Determination of pile failure mechanism under pullout test in loose sand

Estimating the deformation of soil around the pile contributes to reliable design of structures under pullout force. This work presents the results of a series of small-scale physical modelling tests designed to investigate the uplift resistance of piles with diameter of 5 cm and slenderness ratios of 1, 2, 3 and 4 in loose sand. Close photogrammetric technique and particle image velocimetry(PIV) were employed to observe the failure patterns due to uplift force on piles. The results show that the shear zones curve slightly outward near the ground surface. After peak resistance, the shear strain concentrates into a pair of narrow shear bands,then a flow around mechanism is formed accompanied by a reduction in the uplift resistance. The results from the laboratory tests were verified by analytical method proposed by Chattopadhyay and PLAXIS 2D and 3D finite element method software. It is found that the depth and width of the failure surface increase with the increment of the slenderness ratio. A good agreement is observed among the measured bearing capacity and obtained failure surface of the models and the results of numerical modelling. Finally, the maximum deformation of loose and dense sand respectively with densities of 25% and 75% were compared in the stage of fully removing pile. The results shows that the deformation of the soil is related to its density, therefore it depends on its dilatancy.

PI3K expression and PIK3CA mutations are related to colorectal cancer metastases

AIM: To assess the significance of phosphatidylinositol 3-kinase (PI3K) in colorectal cancer (CRC) and toxicity of LY294002 in CRC cells with different metastatic abilities. METHODS: Sixty formalin-fixed and paraffin-embedded CRC tumor specimens were investigated. Adjacent normal colonic mucosa specimens from 10 of these cases were selected as controls. PI3K protein was detected by immunohistochemistry and PIK3CA mutations were investigated by gene sequencing analysis. A flowcytometry-based apoptosis detection kit was used to determine PI3K inhibitor-induced apoptosis in CRC cell lines SW480 and SW620. Expression of phosphorylated protein kinase B in CRC cell lines was detected by Western blotting. RESULTS: There was a significant difference in the proportion of primary lesions (30%, 18/60) vs metastatic lesions (46.7%, 28/60) that were positive for PI3K (P < 0.05). Mutations were detected in exon 9 (13.3%) and exon 20 (8.3%). Out of 60 cases, seven mutations were identified: two hotspot mutations, C.1633G>A resulting in E545A, and C.3140A>G resulting in H1047R; two novel missense mutations C.1624G>A and C.3079G>A; and three synonymous mutations (C.1641G>A, C.1581C>T and C.3027T>A). Exposure of SW480 cells to PI3K inhibitor for 48 h resulted in a significant increase of apoptotic cells in a dose-dependent manner [3.2% apoptotic cells in 0 μmol/L, 4.3% in 5 μmol/L, 6.3% in 10 μmol/L (P < 0.05), and 6.7% in 20 μmol/L (P < 0.05)]. Moreover, PI3K inhibitor induced a similar significant increase of apoptotic cells in the SW620 cell line for 48 h [3.3% apoptotic cells in 0 μmol/L, 13.3% in 5 μmol/L (P < 0.01), 19.2% in 10 μmol/L (P < 0.01), and 21.3% in 20 μmol/L (P < 0.01)]. CONCLUSION: High PI3K expression is associated with CRC metastasis. PI3K inhibitor induced apoptosis in CRC cells and displayed strong cytotoxicity for highly metastatic cells. PI3K inhibition may be an effective treatment for CRC.

A recursive formulation based on corotational frame for flexible planar beams with large displacement

A forward recursive formulation based on corotational frame is proposed for flexible planar beams with large displacement.The traditional recursive formulation has been successfully used for flexible mutibody dynamics to improve the computational efficiency based on floating frame,in which the assumption of small strain and deflection is adopted.The proposed recursive formulation could be used for large displacement problems based on the corotational frame.It means that the recursive scheme is used not only for adjacent bodies but also for adjacent beam elements.The nodal relative rotation coordinates of the planar beam are used to obtain equations with minimal generalized coordinates in present formulation.The proposed formulation is different from absolute nodal coordinate formulation and the geometrically exact beam formulation in which the absolute coordinates are used.The recursive scheme and minimal set of dynamic equations lead to a high computational efficiency in numerical integration.Numerical examples are carried out to demonstrate the accuracy and validity of this formulation.For all of the examples,the results of the present formulation are in good agreement with results obtained using commercial software and the published results.Moreover,it is shown that the present formulation is more efficient than the formulation in ANSYS based on GEBF.

Solid−solid phase transition of tungsten induced by high pressure:A molecular dynamics simulation

The phase transition of tungsten(W)under high pressures was investigated with molecular dynamics simulation.The structure was characterized in terms of the pair distribution function and the largest standard cluster analysis(LSCA).It is found that under 40−100 GPa at a cooling rate of 0.1 K/ps a pure W melt first crystallizes into the body-centred cubic(BCC)crystal,and then transfers into the hexagonal close-packed(HCP)crystal through a series of BCC−HCP coexisting states.The dynamic factors may induce intermediate stages during the liquid−solid transition and the criss-cross grain boundaries cause lots of indistinguishable intermediate states,making the first-order BCC−HCP transition appear to be continuous.Furthermore,LSCA is shown to be a parameter-free method that can effectively analyze both ordered and disordered structures.Therefore,LSCA can detect more details about the evolution of the structure in such structure transition processes with rich intermediate structures.

Optimization of three-dimensional boiling enhancement structure at evaporation surface for high power light emitting diode

A theoretical model of phase change heat sink was established in terms of thermal resistance network. The influence of different parameters on the thermal resistance was analyzed and the crucial impact factors were determined. Subsequently, the forming methods including ploughing-extrusion and stamping method of boiling enhancement structure at evaporation surface were investigated, upon which three-dimensional microgroove structure was fabricated to improve the efficiency of evaporation. Moreover, the crucial parameters related to the fabrication of miniaturized phase change heat sink were optimized. The heat transfer performance of the heat sink was tested. Results show that the developed phase change heat sink has excellent heat transfer performance and is suitable for high power LED applications.

On Strong Law of Large Numbers for Random Sequence

This note is devoted to introduce a new concept of conditionally dominated random variables.Under suitable restrict conditions,a general strong law of large numbers for arbitrary continuous random variables is obtained.

A Parallel-based Lifting Algorithm and VLSI Architecture for DWT

A novel Parallel-Based Lifting Algorithm （PBLA） for Discrete Wavelet Transform （DWT）, exploiting the parallelism of arithmetic operations in all lifting steps, is proposed in this paper. It leads to reduce the critical path latency of computation, and to reduce the complexity of hardware implementation as well. The detailed derivation on the proposed algorithm, as well as the resulting Very Large Scale Integration （VLSI） architecture, is introduced, taking the 9/7 DWT as an example but without loss of generality. In comparison with the Conventional Lifting Algorithm Based Implementation （CLABI）, the critical path latency of the proposed architecture is reduced by more than half from （4Tm ＋ 8Ta）to Tm ＋ 4Ta, and is competitive to that of Convolution-Based Implementation （CBI）, but the new implementation will save significantly in hardware. The experimental results demonstrate that the proposed architecture has good performance in both increasing working frequency and reducing area.

High-resolution remote sensing image-based extensive deformation-induced landslide displacement field monitoring method

Landslide is one of the multitudinous serious geological hazards. The key to its control and reduction lies on dynamic monitoring and early warning. The article points out the insufficiency of traditional measuring means applied for large-scale landslide monitoring and proposes the method for extensive landslide displacement field monitoring using high- resolution remote images. Matching of cognominal points is realized by using the invariant features of SIFT algorithm in image translation, rotation, zooming, and affine transformation, and through recognition and comparison of characteristics of high-resolution images in different landsliding periods. Following that, landslide displacement vector field can be made known by measuring the distances and directions between cognominal points. As evidenced by field application of the method for landslide monitoring at West Open Mine in Fushun city of China, the method has the attraction of being able to make areal measurement through satellite observation and capable of obtaining at the same time the information of large- area intensive displacement field, for facilitating automatic delimitation of extent of landslide displacement vector field and sliding mass. This can serve as a basis for making analysis of laws governing occurrence of landslide and adoption of countermeasures.

A CODEBOOK COMPENSATIVE VOICE MORPHING ALGORITHM BASED ON MAXIMUM LIKELIHOOD ESTIMATION

This paper presents an improved voice morphing algorithm based on Gaussian Mixture Model(GMM) which overcomes the traditional one in the terms of overly smoothed problems of the converted spectral and discontinuities between frames.Firstly, a maximum likelihood estimation for the model is introduced for the alleviation of the inversion of high dimension matrixes caused by traditional conversion function.Then, in order to resolve the two problems associated with the baseline, a codebook compensation technique and a time domain medial filter are applied.The results of listening evaluations show that the quality of the speech converted by the proposed method is significantly better than that by the traditional GMM method, and the Mean Opinion Score(MOS) of the converted speech is improved from 2.5 to 3.1 and ABX score from 38% to 75%.

Bilding Dmage Level Based According to Distance Image Contrast.

Estimation method of building damage level was introduced for the accurate and effective estimation of damage extent and relief goods demand according to long-distance image contrast. In order to obtain completion degree of building edge extracted from long-distance images before and after disaster, the concentration ratio was analyzed with Hough transformation. Based on the maximum posterior probability, estimation method of affected population was designed to accurately estimate victim population, which can be directly reflected by fugitive population. Moreover, on basis of escape route and fugitive population, demand assignment algorithm by backward calculation was designed to improve rescue efficiency.

Dynamic Deformation Monitoring for Long-Span Bridges under Construction and EMD De-noising Method

Construction progress of long-span bridge is complicated and the quality control is strict. Any disadvantage during construction may potentially affect the internal forces and deck alignments after it is open to traffic. To exactly evaluate the periodic alignments, internal forces and safety, geometrical and physical monitoring are needed during construction. This study aims at the requirement of dynamic geometric monitoring during Sutong Bridge construction, and introduces the realization and observing schemes of the self-developed GPS real-time dynamic geometrical deformation monitoring system. Affected by wind load and construction circumstance, GPS （global positioning system） monitoring signal contains a variety of noise. And the useful signal can be extracted from the signal after de-noising the noises. A de-noising method based on EMD （empirical mode decomposition） model is introduced here to process the bridge dynamic monitoring data, and with the wavelet threshold de-noising method are compared. The result shows that the EMD method has good adaptability, is free from the choice of wavelet bases and the number of decomposition layer. The method is an effective de-noising method for dynamic deformation monitoring to large-span bridges.

Crustal Deformation Derived from GPS in the Chinese Mainland from 1991-2004

Based on GPS data from 1991- 2004 and the least-squares collocation method,we analyze the crustal deformation in the Chinese mainland. The results show that the first-order crustal deformation is unchanged in different periods in the Chinese mainland,which reflects the background of regional tectonic activity. The strain rate is much higher in Western China,especially in the Qinghai-Tibetan Plateau and Sichuan-Yunnan area. The variations in different periods are related with seismicity of strong earthquakes during the same time. The GPS data after 2004 shows the post-seismic deformation of the 2001 Kunlun Mountains M S8. 1 earthquake.

Control of Neural Network Feedback Linearization Based on Chaotic Particle Swarm Optimization

A new chaotic particle swarm algorithm is proposed in order to avoid the premature convergence of the particle swarm optimization and the shortcomings of the chaotic optimization, such as slow searching speed and low accuracy when used in the multivariable systems or in large search space. The new algorithm combines the particle swarm algorithm and the chaotic optimization, using randomness and ergodicity of chaos to overcome the premature convergence of the particle swarm optimization. At the same time, a new neural network feedback linearization control system is built to control the single-machine infinite-bus system. The network parameters are trained by the chaos particle swarm algorithm, which makes the control achieve optimization and the control law of prime mover output torque obtained. Finally, numerical simulation and practical application validate the effectiveness of the method.