A two-stage monolithic low noise amplifier is developed for satellite communication applications,using a 0.5μm enhancement PHEMT technology. The on-chip matched amplifier employs lumped elements to reduce the circuit...A two-stage monolithic low noise amplifier is developed for satellite communication applications,using a 0.5μm enhancement PHEMT technology. The on-chip matched amplifier employs lumped elements to reduce the circuit size, and shows a 5012 noise figure less than 0.9dB, gain greater than 26dB, and return loss less than - 10dB in the S-C band range of 3.5 to 4. 3GHz. The noise figure obtained here is the best result ever reported to date of an MMIC LNA with a gain of more than 20dB for the S-C band frequency range. It is attributed to the low noise performance of the enhancement PHEMT transistor and minimized parasitic resistance of the input match network by a common series source inductor and a unique divided resistance at the drain.展开更多
Voherra series behavioral model for radio frequency （RF） power amplifier （PA） has been widely used in system-level simulation, however, high computational complexity makes this kind of model limited to ＂weak＂ no...Voherra series behavioral model for radio frequency （RF） power amplifier （PA） has been widely used in system-level simulation, however, high computational complexity makes this kind of model limited to ＂weak＂ nonlinearity. In order to reduce the computational complexity and the number of coefficients of Volterra series kernels, a Volterra series improved behavioral model based on Laguerre orthogonal polynomials function, namely Voherra-Laguerre behavioral model, is proposed. Mathematical expressions of Volterra-Laguerre behavioral model is derived, and accuracy of the model is verified through comparison of measured and simulation output data from a freescale PA using MRF21030 transistor. Mathematical analysis and simulation results show that Voherra-Laguerre behavioral model has a simple structure, much less coefficients and better modeling performance than general Volterra series model. The model can be used more correctly for system-level simulation of RF PA with wideband signal.展开更多
In order to clarify the effect of condensate inundation on steam condensation in a large tube bundle, condensation heat transfer and the condensate flow pattern in the tube bundle have been experimentally investigated...In order to clarify the effect of condensate inundation on steam condensation in a large tube bundle, condensation heat transfer and the condensate flow pattern in the tube bundle have been experimentally investigated. Test tube bundle consists of 36 cooling tubes, 12 condensate supply tubes and 24 un-cooled dummy tubes. Cooling test tubes are made of copper and have an outer diameter of 19.1 mm and condensing length of 150 mm, Steam flows horizontally through the test tube bundle at gap velocities 15-27 m/s at pressures of 8.8 kPa. In this study, experimental data about condensate flow pattern and condensation heat transfer in a tube bundle were collected for the optimization of tube arrangement in large power plant condensers.展开更多
On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is...On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is analysed at large based on the absorption of semiconductor chip. The mathematical model of both devices and the whole system are also given. It is proved by the experiment that this mathematical model is reliable.展开更多
To improve the efficiency of nano-electronic device fabrication, a new method named floating electrical potential assembly is proposed to realize large-scale assembly of Cu/CuO nanowires, The simulation of floating el...To improve the efficiency of nano-electronic device fabrication, a new method named floating electrical potential assembly is proposed to realize large-scale assembly of Cu/CuO nanowires, The simulation of floating electrical potential distribution on the micro-electrode chip is performed by COMSOL software, and the simulation result shows that the coupled electrical poten- tial on the floating drain electrodes is very close to the original electrical potential applied on the gate electrode, whicb means that the method can provide di-electrophoresis （DEP） force for all the electrode pairs at one time, thus realizing large-scale as- sembly at one time. With Cu/CuO nanowires well dispersed and micro-electrode chip fabrication, nanowires assembly experiments are performed and the experimental results show that Cu/CuO nanowires are assembled at hundreds of micro-electrodes pairs at one time, and the success rate of nanowires assembly also reaches 90%.展开更多
文摘A two-stage monolithic low noise amplifier is developed for satellite communication applications,using a 0.5μm enhancement PHEMT technology. The on-chip matched amplifier employs lumped elements to reduce the circuit size, and shows a 5012 noise figure less than 0.9dB, gain greater than 26dB, and return loss less than - 10dB in the S-C band range of 3.5 to 4. 3GHz. The noise figure obtained here is the best result ever reported to date of an MMIC LNA with a gain of more than 20dB for the S-C band frequency range. It is attributed to the low noise performance of the enhancement PHEMT transistor and minimized parasitic resistance of the input match network by a common series source inductor and a unique divided resistance at the drain.
基金Supported by the National Natural Science Foundation of China （No. 60573111 ）
文摘Voherra series behavioral model for radio frequency （RF） power amplifier （PA） has been widely used in system-level simulation, however, high computational complexity makes this kind of model limited to ＂weak＂ nonlinearity. In order to reduce the computational complexity and the number of coefficients of Volterra series kernels, a Volterra series improved behavioral model based on Laguerre orthogonal polynomials function, namely Voherra-Laguerre behavioral model, is proposed. Mathematical expressions of Volterra-Laguerre behavioral model is derived, and accuracy of the model is verified through comparison of measured and simulation output data from a freescale PA using MRF21030 transistor. Mathematical analysis and simulation results show that Voherra-Laguerre behavioral model has a simple structure, much less coefficients and better modeling performance than general Volterra series model. The model can be used more correctly for system-level simulation of RF PA with wideband signal.
文摘In order to clarify the effect of condensate inundation on steam condensation in a large tube bundle, condensation heat transfer and the condensate flow pattern in the tube bundle have been experimentally investigated. Test tube bundle consists of 36 cooling tubes, 12 condensate supply tubes and 24 un-cooled dummy tubes. Cooling test tubes are made of copper and have an outer diameter of 19.1 mm and condensing length of 150 mm, Steam flows horizontally through the test tube bundle at gap velocities 15-27 m/s at pressures of 8.8 kPa. In this study, experimental data about condensate flow pattern and condensation heat transfer in a tube bundle were collected for the optimization of tube arrangement in large power plant condensers.
文摘On the basis of analysis on the temperature monitoring methods for high voltage devices, a new type of fiber optic sensor structure with reference channel is given. And the operation principle of fiber optic sensor is analysed at large based on the absorption of semiconductor chip. The mathematical model of both devices and the whole system are also given. It is proved by the experiment that this mathematical model is reliable.
基金supported by the National Natural Science Foundation of China(Grant No.51005230)China Postdoctoral Science Foundation(Grant No.2012M520654)the Education Department of Liaoning Province Science and Ttechnology Research Projects(Grant No.L2012213)
文摘To improve the efficiency of nano-electronic device fabrication, a new method named floating electrical potential assembly is proposed to realize large-scale assembly of Cu/CuO nanowires, The simulation of floating electrical potential distribution on the micro-electrode chip is performed by COMSOL software, and the simulation result shows that the coupled electrical poten- tial on the floating drain electrodes is very close to the original electrical potential applied on the gate electrode, whicb means that the method can provide di-electrophoresis （DEP） force for all the electrode pairs at one time, thus realizing large-scale as- sembly at one time. With Cu/CuO nanowires well dispersed and micro-electrode chip fabrication, nanowires assembly experiments are performed and the experimental results show that Cu/CuO nanowires are assembled at hundreds of micro-electrodes pairs at one time, and the success rate of nanowires assembly also reaches 90%.
