Powder mixture of pure A1 and oxidized SiC was consolidated into 10% （mass fraction） SiCp/AI composites at 523 K by equal channel angular pressing and torsion （ECAP-T）. The interfacial bonding of the composites wa...Powder mixture of pure A1 and oxidized SiC was consolidated into 10% （mass fraction） SiCp/AI composites at 523 K by equal channel angular pressing and torsion （ECAP-T）. The interfacial bonding of the composites was characterized by transmission electron microscopy （TEM） and high resolution transmission electron microscopy （HRTEM）. The selected area electron diffraction （SAED） for the interface was investigated. The elements at the interface were scanned by energy dispersive spectroscopy （EDS） and the EDS mapping was also obtained. X-ray diffraction （XRD） analysis was carried out for the composites fabricated by 1 pass, 2 passes and 4 passes ECAP-T. According to the XRD analysis, the influences of ECAP-T pass on the Bragg angle and interplanar spacing for AI crystalline planes were studied. The results show that after ECAP-T, the interface between A1 and SiC within the composites is a belt of amorphous SiO2 containing a trace of A1, Si and C which diffused from the matrix and the reinforcement. With the growing ECAP-T pass, the Bragg angle decreases and interplanar spacing increases for A1 crystalline planes, due to the accumulated lattice strain. The increasing lattice strain of A1 grains also boosts the density of the dislocation within A1 grains.展开更多
The microstructures of the commercial aluminum heavily deformed by the accumulative rolled bonding (ARB), the equal channel angular pressing (ECAP) and the common cold rolling (CR) were determined by the electron back...The microstructures of the commercial aluminum heavily deformed by the accumulative rolled bonding (ARB), the equal channel angular pressing (ECAP) and the common cold rolling (CR) were determined by the electron backscatter patterns system in SEM with thermal field gun. It was found that the EBSP system can be used to determine the microstructure in the deformed state, even in the heavily deformed state. The local texture of the deformed materials was reveal also in this paper.展开更多
The deformation process in the material volume under high-pressure torsion(HPT)was studied.As a model object for the observation of deformation process,we used a composite comprising a bronze matrix and niobium filame...The deformation process in the material volume under high-pressure torsion(HPT)was studied.As a model object for the observation of deformation process,we used a composite comprising a bronze matrix and niobium filaments.The arrangements of the niobium filaments in the bronze matrix and their size have regular geometry.This allows us to monitor and measure the displacement of the niobium filaments in the sample volume,which results from HTP.The bronze/niobium composite samples were subjected to HPT at room temperature and 6 GPa,and the number of revolutions N=1/4,1/2,1,2,3 and 5.It was shown that HPT with revolution number of 1 leads to the 360° rotation of entire sample volume without sample slippage.Similar deformational behavior during HPT can be expected for high-ductility metallic materials.The increase in the number of revolutions more than 2 leads to twisting the niobium filaments in the sample volume and the formation of 'vortex' multilayer structure.The mechanisms for the formation of such structures were discussed.展开更多
基金Project(51175138) supported by the National Natural Science Foundation of ChinaProjects(2012HGZX0030,2013HGCH0011) supported by the Fundamental Research Funds for the Central Universities,China
文摘Powder mixture of pure A1 and oxidized SiC was consolidated into 10% （mass fraction） SiCp/AI composites at 523 K by equal channel angular pressing and torsion （ECAP-T）. The interfacial bonding of the composites was characterized by transmission electron microscopy （TEM） and high resolution transmission electron microscopy （HRTEM）. The selected area electron diffraction （SAED） for the interface was investigated. The elements at the interface were scanned by energy dispersive spectroscopy （EDS） and the EDS mapping was also obtained. X-ray diffraction （XRD） analysis was carried out for the composites fabricated by 1 pass, 2 passes and 4 passes ECAP-T. According to the XRD analysis, the influences of ECAP-T pass on the Bragg angle and interplanar spacing for AI crystalline planes were studied. The results show that after ECAP-T, the interface between A1 and SiC within the composites is a belt of amorphous SiO2 containing a trace of A1, Si and C which diffused from the matrix and the reinforcement. With the growing ECAP-T pass, the Bragg angle decreases and interplanar spacing increases for A1 crystalline planes, due to the accumulated lattice strain. The increasing lattice strain of A1 grains also boosts the density of the dislocation within A1 grains.
文摘The microstructures of the commercial aluminum heavily deformed by the accumulative rolled bonding (ARB), the equal channel angular pressing (ECAP) and the common cold rolling (CR) were determined by the electron backscatter patterns system in SEM with thermal field gun. It was found that the EBSP system can be used to determine the microstructure in the deformed state, even in the heavily deformed state. The local texture of the deformed materials was reveal also in this paper.
基金financial support from the Ministry of Science and Higher Education of the Russian Federation in the framework of Increase Competitiveness Program of NUST “MISi S” (No. K2-2019-008)
文摘The deformation process in the material volume under high-pressure torsion(HPT)was studied.As a model object for the observation of deformation process,we used a composite comprising a bronze matrix and niobium filaments.The arrangements of the niobium filaments in the bronze matrix and their size have regular geometry.This allows us to monitor and measure the displacement of the niobium filaments in the sample volume,which results from HTP.The bronze/niobium composite samples were subjected to HPT at room temperature and 6 GPa,and the number of revolutions N=1/4,1/2,1,2,3 and 5.It was shown that HPT with revolution number of 1 leads to the 360° rotation of entire sample volume without sample slippage.Similar deformational behavior during HPT can be expected for high-ductility metallic materials.The increase in the number of revolutions more than 2 leads to twisting the niobium filaments in the sample volume and the formation of 'vortex' multilayer structure.The mechanisms for the formation of such structures were discussed.
