[Objective] The aim of this study was to investigate the decolorization ef- fects of activated carbon and macroporous resin on Periplaneta americana L. skimmed cream and compare the advantages and disadvantages of the...[Objective] The aim of this study was to investigate the decolorization ef- fects of activated carbon and macroporous resin on Periplaneta americana L. skimmed cream and compare the advantages and disadvantages of the two decolorization technologies. [Method] Periplaneta americana L. skimmed cream was decolored with activated carbon and macroporous resin, and freeze-dried to collect solid decolorization products. By investigating the yield, decolorization rate, protein retention rate and decolorization operation process, the advantages and disadvantages of the two decolorization technologies were compared. [Result] Both activated carbon and macroporous resin can be used for decolorization. To be specific, macroporous resin-decolorization is superior in the yield and protein retention rate, while activated carbon-decolorization is superior in decolorization rate and decolorization operation process. [Conclusion] Macroporous resin-decolorization can be used if protein is the main ingredient required in the experiment, while activated carbon-decolorization can be used if protein is not the main ingredient required.展开更多
Three-dimensional ordered macroporous (3DOM) La1?xKxNiO3 perovskite-type catalysts were successfully prepared by a colloidal crystal template method and characterized by scanning electron microscopy, transmission elec...Three-dimensional ordered macroporous (3DOM) La1?xKxNiO3 perovskite-type catalysts were successfully prepared by a colloidal crystal template method and characterized by scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray scattering elemental mapping, X-ray diffraction, Raman and X-ray photoelectron spectroscopy, and temperature-programmed reduction of H2. Further, their catalytic activity in soot combustion was determined by temperature-programmed oxidation reaction. K substitution into the LaNiO3 lattice led to remarkably improved catalytic activity of this catalyst in soot combustion. Amongst various catalysts, La0.95K0.05NiO3 exhibited the highest activity in soot combustion (with its T50 and CO2 S values being 338 °C and 98.2%, respectively), which is comparable to the catalytic activities of Pt-based catalysts under the condition of poor contact between the soot and the catalyst. K-substitution improves the valence state of Ni and increases the number of oxygen vacancies, thereby leading to increased density of surface-active oxygen species. The active oxygen species play a vital role in catalyzing the elimination of soot. The perovskite-type La1?xKxNiO3 nanocatalysts with 3DOM structure without noble metals have potential for practical applications in the catalytic combustion of diesel soot particles.展开更多
Nanocatalysts consisting of three‐dimensionally ordered macroporous(3DOM)TiO2‐supported ultrafine Pd nanoparticles(Pd/3DOM‐TiO2‐GBMR)were readily fabricated by gas bubbling‐assisted membrane reduction(GBMR)method...Nanocatalysts consisting of three‐dimensionally ordered macroporous(3DOM)TiO2‐supported ultrafine Pd nanoparticles(Pd/3DOM‐TiO2‐GBMR)were readily fabricated by gas bubbling‐assisted membrane reduction(GBMR)method.These catalysts had a well‐defined and highly ordered macroporous nanostructure with an average pore size of 280 nm.In addition,ultrafine hemispherical Pd nanoparticles(NPs)with a mean particle size of 1.1 nm were found to be well dispersed over the surface of the 3DOM‐TiO2 support and deposited on the inner walls of the material.The nanostructure of the 3DOM‐TiO2 support ensured efficient contact between soot particles and the catalyst.The large interface area between the ultrafine Pd NPs and the TiO2 also increased the density of sites for O2 activation as a result of the strong metal(Pd)‐support(TiO2)interaction(SMSI).A Pd/3DOM‐TiO2‐GBMR catalyst with ultrafine Pd NPs(1.1 nm)exhibited higher catalytic activity during diesel soot combustion compared with that obtained from a specimen having relatively large Pd NPs(5.0 nm).The T10,T50 and T90 values obtained from the former were 295,370 and 415°C.Both the activity and nanostructure of the Pd/3DOM‐TiO2‐GBMR catalyst were stable over five replicate soot oxidation trials.These results suggest that nanocatalysts having a 3DOM structure together with ultrafine Pd NPs can decrease the amount of Pd required,and that this approach has potential practical applications in the catalytic combustion of diesel soot particles.展开更多
Porous materials have regular three-dimensional pore structure, which has unique advantages in the field of modern pharmaceutical. At present, porous materials commonly used in the pharmaceutical field are mainly mole...Porous materials have regular three-dimensional pore structure, which has unique advantages in the field of modern pharmaceutical. At present, porous materials commonly used in the pharmaceutical field are mainly molecular sieves, macroporous adsorbent resins, activated carbon, etc. In this paper, the application status of these porous materials in the pharmaceutical field is reviewed, and the future development is prospected.展开更多
Well-dispersed bimetallic NiRh nanoparticles （NPs） with different compositions supported on nitrogen-doped porous carbon （NPC） derived from metal-organic frameworks （ZIF-8） were synthesized through a co-reductio...Well-dispersed bimetallic NiRh nanoparticles （NPs） with different compositions supported on nitrogen-doped porous carbon （NPC） derived from metal-organic frameworks （ZIF-8） were synthesized through a co-reduction method. The NPC-900 supported NiRh catalyst exhibits the highest catalytic activity and 100% hydrogen selectivity toward hydrogen generation from hydrazine. These properties might be attributed to the high surface area and high graphitization of the NPC. This strategy may open up a new avenue for designing high-performance catalysts by utilizing NPC as a support to anchor active metal NPs for additional applications.展开更多
基金Supported by National Natural Science Foundation of China(30560181)~~
文摘[Objective] The aim of this study was to investigate the decolorization ef- fects of activated carbon and macroporous resin on Periplaneta americana L. skimmed cream and compare the advantages and disadvantages of the two decolorization technologies. [Method] Periplaneta americana L. skimmed cream was decolored with activated carbon and macroporous resin, and freeze-dried to collect solid decolorization products. By investigating the yield, decolorization rate, protein retention rate and decolorization operation process, the advantages and disadvantages of the two decolorization technologies were compared. [Result] Both activated carbon and macroporous resin can be used for decolorization. To be specific, macroporous resin-decolorization is superior in the yield and protein retention rate, while activated carbon-decolorization is superior in decolorization rate and decolorization operation process. [Conclusion] Macroporous resin-decolorization can be used if protein is the main ingredient required in the experiment, while activated carbon-decolorization can be used if protein is not the main ingredient required.
基金supported by the National Natural Science Foundation of China(21673142)National Engineering Laboratory for Mobile Source Emission Control Technology(NELMS2017A05)+1 种基金PetroChina Innovation Foundation(2018D-5007-0505)Science Foundation of China University of Petroleum,Beijing(242017QNXZ02,2462018BJC005)~~
文摘Three-dimensional ordered macroporous (3DOM) La1?xKxNiO3 perovskite-type catalysts were successfully prepared by a colloidal crystal template method and characterized by scanning electron microscopy, transmission electron microscopy, high-resolution transmission electron microscopy, energy-dispersive X-ray scattering elemental mapping, X-ray diffraction, Raman and X-ray photoelectron spectroscopy, and temperature-programmed reduction of H2. Further, their catalytic activity in soot combustion was determined by temperature-programmed oxidation reaction. K substitution into the LaNiO3 lattice led to remarkably improved catalytic activity of this catalyst in soot combustion. Amongst various catalysts, La0.95K0.05NiO3 exhibited the highest activity in soot combustion (with its T50 and CO2 S values being 338 °C and 98.2%, respectively), which is comparable to the catalytic activities of Pt-based catalysts under the condition of poor contact between the soot and the catalyst. K-substitution improves the valence state of Ni and increases the number of oxygen vacancies, thereby leading to increased density of surface-active oxygen species. The active oxygen species play a vital role in catalyzing the elimination of soot. The perovskite-type La1?xKxNiO3 nanocatalysts with 3DOM structure without noble metals have potential for practical applications in the catalytic combustion of diesel soot particles.
基金supported by the National Natural Science Foundation of China(21673142,21477164)the National High Technology Research and Development Program of China(863 Program,2015AA030903)~~
文摘Nanocatalysts consisting of three‐dimensionally ordered macroporous(3DOM)TiO2‐supported ultrafine Pd nanoparticles(Pd/3DOM‐TiO2‐GBMR)were readily fabricated by gas bubbling‐assisted membrane reduction(GBMR)method.These catalysts had a well‐defined and highly ordered macroporous nanostructure with an average pore size of 280 nm.In addition,ultrafine hemispherical Pd nanoparticles(NPs)with a mean particle size of 1.1 nm were found to be well dispersed over the surface of the 3DOM‐TiO2 support and deposited on the inner walls of the material.The nanostructure of the 3DOM‐TiO2 support ensured efficient contact between soot particles and the catalyst.The large interface area between the ultrafine Pd NPs and the TiO2 also increased the density of sites for O2 activation as a result of the strong metal(Pd)‐support(TiO2)interaction(SMSI).A Pd/3DOM‐TiO2‐GBMR catalyst with ultrafine Pd NPs(1.1 nm)exhibited higher catalytic activity during diesel soot combustion compared with that obtained from a specimen having relatively large Pd NPs(5.0 nm).The T10,T50 and T90 values obtained from the former were 295,370 and 415°C.Both the activity and nanostructure of the Pd/3DOM‐TiO2‐GBMR catalyst were stable over five replicate soot oxidation trials.These results suggest that nanocatalysts having a 3DOM structure together with ultrafine Pd NPs can decrease the amount of Pd required,and that this approach has potential practical applications in the catalytic combustion of diesel soot particles.
文摘Porous materials have regular three-dimensional pore structure, which has unique advantages in the field of modern pharmaceutical. At present, porous materials commonly used in the pharmaceutical field are mainly molecular sieves, macroporous adsorbent resins, activated carbon, etc. In this paper, the application status of these porous materials in the pharmaceutical field is reviewed, and the future development is prospected.
基金Acknowledgements This work was financially supported by the National Natural Science Foundation of China （Nos. 21201134 and 21571145）, the Natural Science Foundation of Jiangsu Province （No. BK20130370）, the Natural Science Foundation of Hubei Province （No. 2013CFB288）, the Creative Research Groups of Hubei Province （No. 2014CFA007）, and Large-scale Instrument and Equipment Sharing Foundation of Wuhan University.
文摘Well-dispersed bimetallic NiRh nanoparticles （NPs） with different compositions supported on nitrogen-doped porous carbon （NPC） derived from metal-organic frameworks （ZIF-8） were synthesized through a co-reduction method. The NPC-900 supported NiRh catalyst exhibits the highest catalytic activity and 100% hydrogen selectivity toward hydrogen generation from hydrazine. These properties might be attributed to the high surface area and high graphitization of the NPC. This strategy may open up a new avenue for designing high-performance catalysts by utilizing NPC as a support to anchor active metal NPs for additional applications.
