In order to study buckling propagation mechanism in deep sea pipelines, the contact between pipeline's inner walls in buckling process was studied. A two-dimensional ring model was used to represent the pipeline a...In order to study buckling propagation mechanism in deep sea pipelines, the contact between pipeline's inner walls in buckling process was studied. A two-dimensional ring model was used to represent the pipeline and a nonlinear spring model was adopted to simulate the contact between inner walls. Based on the elastoplastic constitutive relationship and the principle of virtual work theory, the coupling effect of pipeline's nonlinear large deformation and wall contact was included in the theoretical analysis with the aid of MATLAB, and the application scope of the theoretical model was also discussed. The calculated results show that during the loading process, the change in external pressure is closely related to the distribution of section stress, and once the walls are contacting each other, the external pressure increases and then remains stable after it reaches a specific value. Without fracture, the pipeline section will stop showing deformation. The results of theoretical calculations agree well with those of numerical simulations. Finally, in order to ensure reliability and accuracy of the theoretical results, the collapse pressure and propagation pressure were both verified by numerical simulations and experiments. Therefore, the theoretical model can be used to analyze pipeline's buckling deformation and contact between pipeline's inner walls, which forms the basis for further research on three-dimensional buckling propagation.展开更多
We carried out a wind tunnel test to measure cladding loads for a high-rise building of 295 m in height, which would be located in the business center of Chongqing Municipality, P. R. China. The rigid model was used t...We carried out a wind tunnel test to measure cladding loads for a high-rise building of 295 m in height, which would be located in the business center of Chongqing Municipality, P. R. China. The rigid model was used to determine fluctuating local pressures on the exterior surfaces of the building. The wind tunnel test results show the cr/tical zone of wind pressures on building surfaces in both standalone and interference conditions. The computational fluid dynamics （CFD） was conducted by using the FLUENT Code to compare with the wind tunnel test results, and the steady three-dimensional turbulent flow with Realizable k-ε as a turbulence model was used. The CFD results are agree with the wind tunnel test results in regards to distributions of wind pressures over a high-rise building＇s surfaces.展开更多
This paper presents the simulation results of the wind environment around a single high-rise building and that around two tall buildings in tandem arrangement by using the lattice Boltzmann method with an aim to under...This paper presents the simulation results of the wind environment around a single high-rise building and that around two tall buildings in tandem arrangement by using the lattice Boltzmann method with an aim to understand the ventilation issues around high-rise buildings in an urban environment.We analyzed the velocity distribution around the buildings and performed numericl simulations to reveal the formation and evolution law of the complex vortex system around the high-rise buildings.Numerical simulation results manifest a periodicity phenamenon in the process of the vortex evolution.For the case of two high-rise buildings,wind velocity in the space between the two buildings is very small,which is nearly a silent regime.Wind velocity above the front building is relatively larger and the maximum wind velocity is approximately 2.5 times the incoming wind velocity.The numerical results can be used in layout planning of high-rise residential buildings to create better environment for ventilation purpose in an urban area.展开更多
Experimental study was carried out on the in-plane bending behavior of glass plates without lateral supports, and the effects of the factors, such as height-to-span ratio, on the stability of glass panels were studied...Experimental study was carried out on the in-plane bending behavior of glass plates without lateral supports, and the effects of the factors, such as height-to-span ratio, on the stability of glass panels were studied. Results show that the in-plane bending glass plates with both ends simply supported and their upper edge free lose overall stability under loads, which belongs to the limit-point type of instability. It is found that the buckling load increases linearly with the increase of height-to-span ratio of the glass plates. The lateral stress of in-plane bending glass plates without lateral supports increases linearly under loads; while the large-area stress increases nonlinearly and the lateral stress is not the controlling factor of instability. In finite element analysis, the first buckling mode is regarded as the initial imperfection and imposed on the model as 1/1000 of the span of the components. The numerical buckling load according to the theory of large deflection is less than the experiment result, which is more conservative and can provide some reference for design. For the design method, when the in-plane load is imposed on the glass plate, its lateral strength and the deflection should be verified. Considering the stability of the in-plane bending glass plate without reliable lateral support, buckling is another possible failure mode and calls for verification.展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 51239008 and 51179126)the National Science and Technology Major Project of the Ministry of Science and Technology of China (Grant No. 2011ZX05026-005)
文摘In order to study buckling propagation mechanism in deep sea pipelines, the contact between pipeline's inner walls in buckling process was studied. A two-dimensional ring model was used to represent the pipeline and a nonlinear spring model was adopted to simulate the contact between inner walls. Based on the elastoplastic constitutive relationship and the principle of virtual work theory, the coupling effect of pipeline's nonlinear large deformation and wall contact was included in the theoretical analysis with the aid of MATLAB, and the application scope of the theoretical model was also discussed. The calculated results show that during the loading process, the change in external pressure is closely related to the distribution of section stress, and once the walls are contacting each other, the external pressure increases and then remains stable after it reaches a specific value. Without fracture, the pipeline section will stop showing deformation. The results of theoretical calculations agree well with those of numerical simulations. Finally, in order to ensure reliability and accuracy of the theoretical results, the collapse pressure and propagation pressure were both verified by numerical simulations and experiments. Therefore, the theoretical model can be used to analyze pipeline's buckling deformation and contact between pipeline's inner walls, which forms the basis for further research on three-dimensional buckling propagation.
基金Funded by the National Natural Science Foundation of China(No.90715024)
文摘We carried out a wind tunnel test to measure cladding loads for a high-rise building of 295 m in height, which would be located in the business center of Chongqing Municipality, P. R. China. The rigid model was used to determine fluctuating local pressures on the exterior surfaces of the building. The wind tunnel test results show the cr/tical zone of wind pressures on building surfaces in both standalone and interference conditions. The computational fluid dynamics （CFD） was conducted by using the FLUENT Code to compare with the wind tunnel test results, and the steady three-dimensional turbulent flow with Realizable k-ε as a turbulence model was used. The CFD results are agree with the wind tunnel test results in regards to distributions of wind pressures over a high-rise building＇s surfaces.
基金Funded by the Natural Science Foundation of Tianjin Municipality (No. 06YFJMJC05300)the Science and Technology Development Foundation for Universities of Tianjin Municipality (No. 20060823)
文摘This paper presents the simulation results of the wind environment around a single high-rise building and that around two tall buildings in tandem arrangement by using the lattice Boltzmann method with an aim to understand the ventilation issues around high-rise buildings in an urban environment.We analyzed the velocity distribution around the buildings and performed numericl simulations to reveal the formation and evolution law of the complex vortex system around the high-rise buildings.Numerical simulation results manifest a periodicity phenamenon in the process of the vortex evolution.For the case of two high-rise buildings,wind velocity in the space between the two buildings is very small,which is nearly a silent regime.Wind velocity above the front building is relatively larger and the maximum wind velocity is approximately 2.5 times the incoming wind velocity.The numerical results can be used in layout planning of high-rise residential buildings to create better environment for ventilation purpose in an urban area.
文摘Experimental study was carried out on the in-plane bending behavior of glass plates without lateral supports, and the effects of the factors, such as height-to-span ratio, on the stability of glass panels were studied. Results show that the in-plane bending glass plates with both ends simply supported and their upper edge free lose overall stability under loads, which belongs to the limit-point type of instability. It is found that the buckling load increases linearly with the increase of height-to-span ratio of the glass plates. The lateral stress of in-plane bending glass plates without lateral supports increases linearly under loads; while the large-area stress increases nonlinearly and the lateral stress is not the controlling factor of instability. In finite element analysis, the first buckling mode is regarded as the initial imperfection and imposed on the model as 1/1000 of the span of the components. The numerical buckling load according to the theory of large deflection is less than the experiment result, which is more conservative and can provide some reference for design. For the design method, when the in-plane load is imposed on the glass plate, its lateral strength and the deflection should be verified. Considering the stability of the in-plane bending glass plate without reliable lateral support, buckling is another possible failure mode and calls for verification.
