四川天然气产区循环经济探析

定义了天然气产区循环经济的内涵,认为天然气产区循环经济包括3个层次,即天然气产区内部组织循环、资源地的区域循环和社会循环。从改革天然气产业管理体制、加强地方政府监管、加强天然气开发企业的科技创新等方面提出了发展四川天然气产区循环经济的建议。

Productivity of coalbed methane wells in southern of Qinshui Basin

Based on regional CBM geological characteristics and drainage data of three typical Coalbed Methane(CBM) wells in the southern Qinshui Basin,history matching,productivity prediction and factor analysis of gas production control are conducted by using COMET3 reservoir modeling software.The results show that in the next 20 years,the cumulative and average daily gas production of the QN01 well are expected to be 800×104 m3 and 1141.1 m3/d,for the QN02 well 878×104 m3 and 1202.7 m3/d and 97.5×104 m3 and 133.55 m3/d for the QN03 well.Gas content and reservoir pressure are the key factors controlling gas production in the area;coal thickness,permeability and porosity are less important;the Langmuir volume,Langmuir pressure and adsorption time have relatively small effect.In the process of CBM recovery,the material source and driving force are the key features affecting gas productivity,while the permeation process is relatively important and the desorption process has some impact on gas recovery.

Exergy Analysis and Retrofitting of Natural Gas-based Acetylene Process

This article presents an acetylene production process by partial oxidation/combustion of natural gas. The thermodynamic performance and exergy analysis in the process are investigated using the flow-sheeting program Aspen Plus. The results indicate that the most important destruction of exergy is found to occur in the reactor and water quenching scrubber, amounting to 8.23% and 10.39%, respectively, of the entire system. Based on the results of thermodynamic and exergy analysis, the acetylene reactor has been retrofitted. The improvement ratios of molar 02 to CH4 and molar CO to CN4 are 0.65 and 0.20, respectively. An improvement of the acetylene production system is proposed. Adopting the improvement operation conditions and using oil to realize the reaction heat recovery, the feedstock of natural gas is reduced by 9.88% and the exergy loss in the retrofitting process is decreased by 19.71% compared to the original process.

Research on forced gas draining from coal seams by surface well drilling

Surface drilling was performed at the Luling Coal Mine,in Huaibei,to shorten the period required for gas draining.The experimental study was designed to reduce the cost of gas control by efficiently draining gas from the upper protected layer.The structural arraignment and technical principles of pressure relief via surface drilling are discussed.Results from the trial showed that gas drained from the surface system over a period of 10 months.The total amount of collected gas was 248.4 million m^3.The gas draining occurred in three stages：a growth period;a period of maximum gas production;and an attenuation period.The period of maximum gas production lasted for 4 months.During this time the methane concentration ranged from 60%to 90%and the average draining rate was 10.6 m^3/min.Combined with other methods of draining it was possible to drain 70.6%of the gas from middle coal seam groups.The amount of residual gas dropped to 5.2 m^3/ton,and the pressure of the residual gas fell to 0.53 MPa, thereby eliminating the outburst danger in the middle coal seam groups.The factors affecting pressure relief gas draining by surface drilling were analysed.

Combined Action of Uniform Flow and Oscillating Flow Around Marine Riser at Low Keulegan-Carpenter Number

With the increase of petroleum and gas production in deep ocean, marine risers of circular cylinder shape are widely used in the offshore oil and gas platform. In order to research the hydrodynamic performance of marine risers, the dynamic mesh technique and User-Defined Function(UDF) are used to simulate the circular cylinder motion. The motion of a transversely oscillating circular cylinder in combination of uniform flow and oscillating flow is simulated. The uniform flow and oscillating flow both are in x direction. SIMPLE algorithm is used to solve the Navier-Stokes equations. The User-Defined Function is used to control the cylinder transverse vibration and the inlet flow. The lift and drag coefficient changing with time and the map of vorticity isolines at different phase angle are obtained. Force time histories are shown for uniform flow at Reynolds number(Re) of 200 and for the combination of uniform and oscillating flows. With the increase of amplitude of oscillating flow in combined flow, the change of lift amplitude is not sensitive to the the change of cylinder oscillating frequency. Lift amplitude increases with the increase of oscillating flow amplitude in the combined flow, but there is no definite periodicity of the lift coefficient. The drag and inertia force coefficients change when the maximum velocity of the oscillating flow increases in the combined flow. The vortex shedding near the circular cylinder shows different characteristics.

Deep-water Riser Fatigue Monitoring Systems Based on Acoustic Telemetry

Marine risers play a key role in the deep and ultra-deep water oil and gas production. The vortex-induced vibration （VIV） of marine risers constitutes an important problem in deep water oil exploration and production. VIV will result in high rates of structural failure of marine riser due to fatigue damage accumulation and diminishes the riser fatigue life. In-service monitoring or full scale testing is essential to improve our understanding of V1V response and enhance our ability to predict fatigue damage. One ma- rine riser fatigue acoustic telemetry scheme is proposed and an engineering prototype machine has been developed to monitor deep and ultra-deep water risers＇ fatigue and failure that can diminish the riser fatigue life and lead to economic losses and eco-catastrophe. Many breakthroughs and innovation have been achieved in the process of developing an engineering prototype machine. Sea trials were done on the 6th generation deep-water drilling platform HYSY-981 in the South China Sea. The inclination monitoring results show that the marine riser fatigue acoustic telemetry scheme is feasible and reliable and the engineering prototype machine meets the design criterion and can match the requirements of deep and ultra-deep water riser fatigue monitoring. The rich experience and field data gained in the sea trial which provide much technical support for optimization in the engineering prototype machine in the future.

Theory and practice of integrated coal production and gas extraction

The integrated extraction of coal and gas combines coal mining with gas capture. Taking into account the gas deposition and flow conditions in the Chinese coal basins, this paper describes the status of the theory and key technologies of this integrated extraction system, and presents its application and practice in the Shaqu, Zhongxing, Fenghuangshan and Pingmei mines. Areas for further improvements in future studies are discussed, focusing in particular on the fundamentals of the extraction system to make it greener, more scientific, and more advanced in both the exploitation and utilization of coal and the gas in coal.

Experimental study on effects of CBM temperature-rising desorption

To study the effects of CBM （coal bed methane） temperature-rising desorption, isothermal adsorption/desorption experiments on three ranks （anthracite, coking coal and lignite） of coal at different temperatures were designed based on the traditional CBM decompression desorption. The experimental results indicate that temperature-rising desorption is more effec- tive in high-rank coal, and ever-increasing temperature of high-rank coal reservoir can reduce the negative effects of coal ma- trix shrinkage in the process of production and improve the permeability of the coal reservoir as well. It is also revealed that the technique of temperature-rising desorption applied in higher-rank coal reservoir can enhance CBM recovery ratio. This study provided theoretical support for the application of temperature-rising desorption technique in practical discharging and mining projects, which can effectively tackle the gas production bottleneck problem.

Steam Reforming of Natural Gas： A Value Addition to Natural Gas Utilization in Nigeria

Petrochemicals play a vital role in the economy of any nation. The products of the industry are the building blocks in many industries as they deepen the forward and backward linkages of the petroleum sector with the rest of the economy. The industry uses a variety of hydrocarbon feedstock such as different cuts of naphtha from refinery and natural gas. One of the problems facing the industry is lack of reliable feedstock supplies. Nigeria has the potential to be a major petrochemicals producer. With proven gas reserves currently estimated at 187 tcf, not much has been accomplished with respect to the effective exploitation and utilization of this resource as most of the nation＇s natural gas production has been flared, liquefied for export or re-injected to enhance greater crude oil recovery. It has become imperative to further find ways to exploit and utilize the nation＇s natural gas reserves and translate it to the improvement of the nation＇s economy. Steam reforming of natural gas is one of the avenues for conversion of natural gas to petrochemicals. This paper, however, reviews various ways of utilizing natural gas, examines the process details of steam reforming of natural gas as a route to optimized natural gas utilization and industrialization in Nigeria. Syngas （synthesis gas） is a versatile feedstock for most petrochemicals and chemical intermediates. Thus utilizing natural gas in this way would strengthen the petrochemical industry making it possible for the country to change from raw materials to value-added products supplier, boost the economy and solve the ＂hydra-headed＂ problem of unemployment in Nigeria with its multiplier employment effect.

Optimizing the drilled well patterns for CBM recovery via numerical simulations and data envelopment analysis

Coalbed methane(CBM) commercial development requires choosing the arrangement of the wells.This should be done by considering the corresponding input-output(investment-profit) efficiencies.Simulations were obtained from the computer modeling group(CMG) given the reservoir conditions of the Panzhuang block in the southern part of the Qinshui Basin.This is a demonstration region for CBM development located in Shanxi province of northern China.The sensitivity of gas production from a single vertical well to the primary reservoir parameters was estimated first.Then multi-well gas production from three different well patterns was simulated to estimate the most appropriate well spacing.Combining the investment requirements then gave investment-profit efficiencies for these well patterns.A data envelopment analysis(DEA) model was used to optimize the efficiency.The results show that the permeability,the reservoir pressure,and the gas content have an evident impact on single well gas production.The desorption time has little or no affect on production.The equilateral triangular well pattern(ETWP) in a 400 m well spacing is,for multi-well development,the optimal pattern.It has a better input-output ratio,a longer stable yield time,and provides for greater CBM recovery than does either the rectangular well pattern(RWP) or the five point well pattern(FPWP).

Prediction and control of rock burst of coal seam contacting gas in deep mining

By analyzing the characteristics and the production mechanism of rock burstthat goes with abnormal gas emission in deep coal seams,the essential method of eliminatingabnormal gas emission by eliminating the occurrence of rock burst or depressingthe magnitude of rock burst was considered.The No.237 working face was selected asthe typical working face contacting gas in deep mining;aimed at this working face,a systemof rock burst prediction and control for coal seam contacting gas in deep mining wasestablished.This system includes three parts:① regional prediction of rock burst hazardbefore mining,② local prediction of rock burst hazard during mining,and ③ rock burstcontrol.

The Shandong Shidao Bay 200 MW_e High-Temperature Gas-Cooled Reactor Pebble-Bed Module(HTR-PM) Demonstration Power Plant: An Engineering and Technological Innovation

In 2005, the US passed the Energy Policy Act of 2005 mandating the construction and operation of a high-temperature gas reactor （HTGR） by 2021. This law was passed after a multiyear study by national experts on what future nuclear technologies should be developed. As a result of the Act, the US Congress chose to develop the so-called Next-Generation Nuclear Plant, which was to be an HTGR designed to produce process heat for hydrogen production. Despite high hopes and expectations, the current status is that high temperature reactors have been relegated to completing research programs on advanced fuels, graphite and materials with no plans to build a demonstration plant as required by the US Con- gress in 2005. There are many reasons behind this diminution of HTGR development, including but not limited to insufficient government funding requirements for research, unrealistically high temperature requirements for the reactor, the delay in the need for a ＂hydrogen＂ economy, competition from light water small modular light water reactors, little utility interest in new technologies, very low natural gas prices in the US, and a challenging licensing process in the US for non-water reactors.

Design Features and Performance Data of a New 400 kW Biomass Gasification Power Plant of Downdraft Type

A new biomass-gasification power plant, of medium-size downdraft type, is presented and discussed in its design features and performance characteristics. Its configuration and overall dimensions, initially conceived for 800 kW, were recently re-tuned, from a functional point of view and on the base of a parallel theoretical analysis, by decreasing to about 400 kW the former nominal power level. This provision, jointly with the basic design choice of adopting a long and amply dimensioned inlet-biomass thermal pretreatment section, turned out quite effective in achieving high gasification temperatures and a low-tar content in the produced gas at fuel-to-air ratios well below the usually imposed ones, to the advantage of the heat value of the product-gas. The paper discusses the numerical analysis results which helped to properly re-adjust the operational parameters of the gasifier and then presents the experimental performance data of the overall power plant including biomass consumption, gasification temperatures, gas production, composition and pollutants content, cold-gas conversion efficiency and global electric efficiency. Special care is devoted to investigating the issue of a significant production of carbon-containing particulate matter in the product gas, which turns out made up of char and fixed carbon much more than of tar species.

Participatory Governance and Decision-Making： Oil and Gas in Santos （Brazil）

The growth of industry and services occurred on a world scale in recent decades, is correlated to large events that propel whole nations to think of local development strategies, integrated and sustainable, based on structural and conjunctural changes, and brought on by human factors or natural causes in dependent of the human will, and lies in the context of innovative models of supply chain arrangements, as is the case of participatory governance network of production of oil and gas. The present study aim is identify and analyze the impacts, local and regional, due to the introduction of the production of oil and gas （originating layer known aspre-salt） in the city of Santos, Sao Paulo, Brazil. The current state of development of a software monitoring indicator is aimed at assessing the present stage and monitor the process of participatory governance in the network of production of oil and gas in Santo is presented here.

Effects of Condensed Tannins from Quebracho Extract on the Kinetic of in vitro Gas Production on Trifofium repens, Lotus corniculatus and Lofium perenne

The aim of this work was to study the effect of condensed tannins （CT） on the kinetic of gas production in vitro, on the three main species of Azorean pasture： Trifolium repens, Lotus corniculatus and Lolium perenne, using Quebracho extract as the source of CT, and also to calculate total tannins and condensed tannins on the species studied. Lotus corniculatus, Lolium perenne and Trifolium repens were tested in vitro with the inclusion of Quebracho extract in doses of 0%, 2.5% and 5% DM. The total content in tannins was determined in the 3 species. We have found, in comparison with standard tannic acid, that tannins exist in the flower of T. repens （0.81 equivalents of tannic acid） and in L .corniculatus （1.07 equivalents of tannic acid） but not in L .perenne （0 equivalents of tannic acid）. The concentration of condensed tannins in the 3 species was： 0.34 mg/mL for T. repens; 0.83 mg/mL for L. corniculatus and 0 mg/ml for L. perenne. We verified that a significant reduction （P 〈 0.05） of gas production happened for doses of 5% of CT in comparison with the other two concentrations： 0% and 2.5% of CT. The results of this study express a reduction of the fermentation rate, which implies a reduction of gas production, so, a reduction of methane emission to the atmosphere and an increase of exploitation of the protein by ruminants.

Oil and Gas Resources Management and Environmental Challenges in Nigeria

Nigeria is richly endowed with crude oil and natural gas deposits, which are the country＇s main source of energy and foreign exchange earnings. These deposits are concentrated at the Niger Delta region which has attracted the presence of multinational oil/gas companies to the area. This paper analyses the impact of oil and gas development on the rich biological diversity of the region and its consequences on the development of the region and the nation at large. The paper further reviews the abject poverty of the oil/gas producing communities whose source of livelihoods, fisheries resources, agricultural soils/farmlands, forests, clean water, fresh air and housing are being destroyed due to poor energy resource management. The magnitude of destruction and frustration is reflected in unending conflict and insecurity in the region leading to many shut-in productions which pose a governance challenge as the country＇s economy and development is heavily dependent on oil and gas production.

A new method to calculate the productivity index for vertical fractured well of tight gas reservoir

Generally the irreducible water saturation of low permeability gas reservoir is quite high which leads to the permeability stress sensibility and threshold pressure gradient. Under the assumption that permeability varies with experimental law of the pseudo pressure drop, according to concepts of perturbable ellipses and equivalent developing regulations, the calculation method of stable production of hydraulically fractured gas well in low permeability reservoirs is investigated with threshold pressure. And productivity curve is drawn and analyzed. The result shows that, permeability modulus and threshold pressure have effect on production of fractured gas well. The higher the permeability modulus and the threshold pressure, the lower the production is. Therefore, the impact of stress sensitive and threshold pressure must he considered when analyzing the productivity of vertical fracture well in low permeability gas reservoir.

Zoning of Far Eastern Seas of Russia for Integrated Nature Management

On the Pacific coast of Russia implementation of the methodology of the integrated nature management has a number of peculiarities. On the one hand, these districts are characterized by severe hydrometeorological conditions. On the other hand, Russia has no applicable legislation on coastal issues. Thus, to prepare informational, theoretical and methodical bases for organization of sustained nature management in coastal zones of the Russian Federation, we developed hierarchy structure of delimitation of coastal areas and recommendations for their development on the basis of nature resource and social-economic zoning. Zoning of the Russian Far East is suggested to include two major directions： （1） planning of sustainable development of the region and （2） solving contradictions between fisheries and productions of oil and gas in the coastal zones.

Technology for Comprehensive Utilization and Commercial Application of Coal,Oil and Gas at Yanchang Oil Group Passed Appraisal

On June 16,2016 the technical achievement of the Shaanxi Yanchang Oil Group relating to ＂the integrated process technology for comprehensive utilization of coal,oil and gas and their commercial application＂ has passed the experts’appraisal in Beijing.It is said that this achievement has shattered the traditional precedent and engineering paradigm of using coal or natural gas to simplistically manufacture methanol and has carved out a new mode for comprehensive utilization of coal, oil and gas resources, featuring apparent emissions reduction ef-fects with innovative nature to command a leading posi-tion internationally.

Key Engineering Highlights of Facilities ＆ Equipment for Oil ＆ Gas Production in Kuwait Oil Company

The paper provides an insight into key engineering aspects of Kuwait Oil Company＇s existing projects, facilities and equipment both current and from nearly 30 years of projects development. It deals with engineering features of mainly process and mechanical equipment, both static and rotating besides others, used for collection, separation, desalting, heat transfer, chemical treatment, storage, transmission, pipelines and similar facilities utilized for upstream oil and gas production, both sweet and sour. Engineering highlights include certain technological developments, metallurgical aspects, few best practices and lessons learnt as well. Seven （7） case studies are included towards the end that show case some of the engineering aspects of facility equipment, lessons learned from their engineering and conclusions drawn that, emphasize the need to focus on initial, preliminary engineering aspects of projects and could provide useful tips for oil and gas engineers and designers.