太阳能吸热表面的结构与材质

讨论了电介质陶瓷材料太阳能吸热表面的特性及表面结构，基质和发色体的适当匹配。

Theoretical and Practical Progress of New Heliostat by Chen et al.

Recently, Chen and his team were active in the theoretical and practical study of a new heliostat for the use of solar energy. This work represents the first innovation in the area of heliostats after many years of little progress. The mathematical development of the tracking and concentration optics principles, and the practical implementation and demonstration of the technology, are both very interesting advances in this field. Many applications are possible for this technology such as generation of solar electricity and solar industrial process heat.

Energy efficiency performance of multi-energy district heating and hot water supply system

A district heating and hot water supply system is presented which synthetically utilizes geothermal energy,solar thermal energy and natural gas thermal energy.The multi-energy utilization system has been set at the new campus of Tianjin Polytechnic University(TPU),A couple of deep geothermal wells which are 2 300 m in depth were dug,Deep geothermal energy cascade utilization is achieved by two stages of plate heat exchangers(PHE) and two stages of water source heat pumps(WSHP).Shallow geothermal energy is used in assistant heating by two ground coupled heat pumps(GCHPs) with 580 vertical ground wells which are 120 m in depth.Solar thermal energy collected by vacuum tube arrays(VTAs) and geothermal energy are complementarily utilized to make domestic hot water.Superfluous solar energy can be stored in shallow soil for the GCHP utilization.The system can use fossil fuel thermal energy by two natural gas boilers(NGB) to assist in heating and making hot water.The heating energy efficiency was measured in the winter of 2010-2011.The coefficients of performance(COP) under different heating conditions are discussed.The performance of hot water production is tested in a local typical winter day and the solar thermal energy utilization factor is presented.The rusults show that the average system COP is 5.75 or 4.96 under different working conditions,and the typical solar energy utilization factor is 0.324.

Utilizing Solar Thermal Energy for Post-Combustion C02 Capture

Post-combustion amine absorption and stripping can remove 90% of the CO2 from power plant flue gas, but systems can reduce electrical output by approximately 30% due to energy requirements for stripping CO2 from solvent and CO2 compression. The CO2 capture energy penalty can be reduced while developing renewable energy technologies by meeting CO2 capture energy requirements with a solar thermal energy system, particularly when electricity demand and prices are the highest. This study presents an initial review of solar thermal technologies for supplying CO2 capture energy, with a focus on high temperature systems. Parabolic troughs and central receivers are technically able to provide energy for CO2 capture. However, the solar system＇s capital costs would be roughly half that of the base coal-fired plant with CO2 capture, and high electricity prices are required to offset the costs of operating the solar thermal system. For high temperature solar thermal systems, direct electricity generation is likely a more efficient way to use solar energy to replace output lost to CO2 capture energy. However, low temperature solar thermal systems might integrate better with solvent stripping equipment, and more rigorous analysis is required to definitively assess the feasibility of using solar energy for CO2 capture.

Assessment of Solar-Coal Hybrid Electricity Power Generating Systems

Botswana currently depends on electricity generated from coal-based power plant or electricity supplied from the border in South Africa. The country has good reserves of coal and the solar radiation is sufficiently high to make solar thermal attractive for generating electricity. The paper presents two conceptual coal-fired power station designs in which a solar sub-system augments heat to the feed heaters or to the boiler. The thermal and economic analyses showed enhanced system performance which indicates that solar power could be embedded into existing fossil fuel plants or new power stations. Integrating solar energy with existing or new fossil fuel based power plants could reduce the cost of stand-alone solar thermal power stations, reduce CO2 emissions and produce experience necessary to operate a full scale solar thermal electricity generation facility.

Thermal Analyses of Combined Utilization Process of Seawater by Solar Chimney

It is promising to simultaneously develop multiple products through the combined utilization of seawater by solar chimney technology. A small scale experimental system was set up. The collector temperature, the seawater temperature, and the temperature and humidity of the airflow under the collector were measured. Thermal network analysis of the system was carried out. The results show that the airflow is nearly saturated at the entrance of the chimney, and the mean dry-bulb and wet-bulb temperatures of the airflow have increased by 8.4 ℃ and 9.6 ℃, respectively. The radiation heat transfer between the collector and the sky is the biggest heat loss in the system, which is up to 29.1% on average of the solar energy. However, the water evaporation heat is about 23.6% on average of the solar energy. To reduce the heat loss and enhance the water evaporation, it is necessary to reduce the emissivity and thermal conductivity of the collector and increase the evaporation areas.