Objective] This study aimed to investigate the relationship between pistil-late flower developmental morphology and stigma receptivity in Euphorbia pulcherri-ma. [Method] One-year-old adult plants of E. pulcherrima cu...Objective] This study aimed to investigate the relationship between pistil-late flower developmental morphology and stigma receptivity in Euphorbia pulcherri-ma. [Method] One-year-old adult plants of E. pulcherrima cultivar ‘Mil enium’ were used as experimental materials to analyze pistil ate flower development process by macroscopic and scanning electron microscope （SEM） observation. Stigma receptivity was detected with benzidine-hydrogen peroxide method and in vivo pol en germina-tion method. [Result] The pistil ate flower development process of E. pulcherrima was consisted of columnar stigma phase, stigma lobe slightly opening phase, Y-shape stigma lobe phase, inverse V-shaped stigma lobe phase and stigma curling phase. Pistil ate flower development and stigma receptivity of E. pulcherrima exhibit-ed certain correlation. The stigma receptive period lasted from stigma lobe slightly opening phase to inverse V-shaped stigma lobe phase; inverse V-shaped stigma lobe phase was appropriate for pol ination, lasting for 3-5 d, with V-shaped stigma lobe and a large amount of exudates on stigma surface according to SEM obser-vation. Stigma receptivity of E. pulcherrima detected with benzidine-hydrogen perox-ide method was consistent with that detected in vivo pol en germination method. [Conclusion] ln breeding practice, the optimal pol ination period of E. pulcherrima can be determined based on the developmental morphology of pistil ate flower.展开更多
Objective] The aim was to explore the potential of Nitzschia capitel ata as excel ent baits and bioenergy, and the optimal light intensity and nitrogen-to-phos-phorus （N/P） ratio suitable for its growth were researc...Objective] The aim was to explore the potential of Nitzschia capitel ata as excel ent baits and bioenergy, and the optimal light intensity and nitrogen-to-phos-phorus （N/P） ratio suitable for its growth were researched as wel . [Method] With light intensity gradient set, Nitzschia capitel ata was cultured with the same nutrients at （25 ±1） ℃ and light cycle at 12 h/d to select optimal light intensity. Then, Nitzschia capitel ata was cultured with the same condition, and nitrogen-to-phospho-rus ratios at 5∶1, 6∶1, 7∶1 and 8∶1. [Result] With light intensity at 3 000 lx, specific growth rate and standing stock achieved the highest at 0.51 d-1 and 7.97×104 cel s/ml. The growth condition with nitrogen-to-phosphorus ratio at 6∶1 was the most suitable for Nitzschia capitel ata growth. [Conclusion] The optimal light intensity and nitrogen-to-phosphorus ratio were 3 000 lx and 6∶1, respectively, for Nitzschia capitel ata.展开更多
An optimal design methodology for the configuration of two rail slider was proposed to get better dynamic performance. The taper length, taper height and the rail width of the reading/writing head are considered as ...An optimal design methodology for the configuration of two rail slider was proposed to get better dynamic performance. The taper length, taper height and the rail width of the reading/writing head are considered as design variables. The complex geometry method is utilized as the search scheme in the optimization process. Optimization results show that the new slider has better dynamic characteristics and is more stable than the original designed slider. The optimization process also demonstrates that the optimum model and optimum method is effective.展开更多
Arc erosion morphologies of Ag/MeO（10） electrical contact materials after 50000 operations under direct current of 19 V and 20 A and resistive load conditions were investigated using scanning electron microscope（SE...Arc erosion morphologies of Ag/MeO（10） electrical contact materials after 50000 operations under direct current of 19 V and 20 A and resistive load conditions were investigated using scanning electron microscope（SEM） and a 3D optical profiler（3DOP）. The results indicated that 3DOP could supply clearer and more detailed arc erosion morphology information. Arc erosion resistance of Ag/SnO_2（10） electrical contact material was the best and that of Ag/CuO（10） was the worst. Arc erosion morphology of Ag/MeO（10） electrical contact materials mainly included three different types. Arc erosion morphologies of Ag/ZnO（10） and Ag/SnO_2（10） electrical contact materials were mainly liquid splash and evaporation, and those of Ag/CuO（10） and Ag/CdO（10） were mainly material transfer from anode to cathode. Arc erosion morphology of Ag/SnO_2（6）In_2O_3（4） electrical contact materials included both liquid splash, evaporation and material transfer. In addition, the formation process and mechanism on arc erosion morphology of Ag/MeO（10） electrical contact materials were discussed.展开更多
Nose deflection control is a new concept of fast response control model.The partial nose of projectile deflects a certain angle relative to the axis of projectile body and then pressure difference emerges on the windw...Nose deflection control is a new concept of fast response control model.The partial nose of projectile deflects a certain angle relative to the axis of projectile body and then pressure difference emerges on the windward and leeward sides of warhead.Consequently,aerodynamic control force is generated.This control way has high control efficiency and very good application prospects in the ammunition system.Nose deflection actuator based on smart material and structure enables projectile body morphing to obtain additional aerodynamic force and moment,changes the aerodynamic characteristics in the projectile flight process,produces the corresponding balance angle and sideslip angle resulting in motor overload,adjusts flight moving posture to control the ballistics,finally changes shooting range and improves firing accuracy.In order to study characteristics of self-adaptive control projectile,numerical simulations are conducted by using fluid dynamics software ANSYS FLUENT for stabilized rocket projectile.The aerodynamic characteristics at different nose delectation angles,different Mach numbers and different angles of attack are obtained and compared.The results show that the nose deflection control has great influence on the head of rocket projectile,and it causes the asymmetry of the flow field structure and the increase of pressure differences of the warhead on the windward and leeward surface,which results in a larger lift.Finally,ballistics experiments are done for verification.The results can offer theoretical basis for self-adaptive rocket projectile design and optimization and also provide new ideas and methods for field smart ammunition research.展开更多
By elastic-plastic finite deformation finite element analysis (FEA), the conservation of J-integral is investigated in detail for a welded joint with an overmatchingweld in plane stress case. It is indicated that J-in...By elastic-plastic finite deformation finite element analysis (FEA), the conservation of J-integral is investigated in detail for a welded joint with an overmatchingweld in plane stress case. It is indicated that J-integral is path dependent under various conditions at least in the cases studied in this paper. Meanwhile, the above conclusions are verified by the hybrid method results in which combined Moire interferometry with FEA.展开更多
基金Supported by Fund for Independent Innovation of Agricultural Science and Technologyin Jiangsu Province[CX(10)411]~~
文摘Objective] This study aimed to investigate the relationship between pistil-late flower developmental morphology and stigma receptivity in Euphorbia pulcherri-ma. [Method] One-year-old adult plants of E. pulcherrima cultivar ‘Mil enium’ were used as experimental materials to analyze pistil ate flower development process by macroscopic and scanning electron microscope （SEM） observation. Stigma receptivity was detected with benzidine-hydrogen peroxide method and in vivo pol en germina-tion method. [Result] The pistil ate flower development process of E. pulcherrima was consisted of columnar stigma phase, stigma lobe slightly opening phase, Y-shape stigma lobe phase, inverse V-shaped stigma lobe phase and stigma curling phase. Pistil ate flower development and stigma receptivity of E. pulcherrima exhibit-ed certain correlation. The stigma receptive period lasted from stigma lobe slightly opening phase to inverse V-shaped stigma lobe phase; inverse V-shaped stigma lobe phase was appropriate for pol ination, lasting for 3-5 d, with V-shaped stigma lobe and a large amount of exudates on stigma surface according to SEM obser-vation. Stigma receptivity of E. pulcherrima detected with benzidine-hydrogen perox-ide method was consistent with that detected in vivo pol en germination method. [Conclusion] ln breeding practice, the optimal pol ination period of E. pulcherrima can be determined based on the developmental morphology of pistil ate flower.
基金Supported by Guizhou Provincial Science&Technology Fund((2010)2067)~~
文摘Objective] The aim was to explore the potential of Nitzschia capitel ata as excel ent baits and bioenergy, and the optimal light intensity and nitrogen-to-phos-phorus （N/P） ratio suitable for its growth were researched as wel . [Method] With light intensity gradient set, Nitzschia capitel ata was cultured with the same nutrients at （25 ±1） ℃ and light cycle at 12 h/d to select optimal light intensity. Then, Nitzschia capitel ata was cultured with the same condition, and nitrogen-to-phospho-rus ratios at 5∶1, 6∶1, 7∶1 and 8∶1. [Result] With light intensity at 3 000 lx, specific growth rate and standing stock achieved the highest at 0.51 d-1 and 7.97×104 cel s/ml. The growth condition with nitrogen-to-phosphorus ratio at 6∶1 was the most suitable for Nitzschia capitel ata growth. [Conclusion] The optimal light intensity and nitrogen-to-phosphorus ratio were 3 000 lx and 6∶1, respectively, for Nitzschia capitel ata.
文摘An optimal design methodology for the configuration of two rail slider was proposed to get better dynamic performance. The taper length, taper height and the rail width of the reading/writing head are considered as design variables. The complex geometry method is utilized as the search scheme in the optimization process. Optimization results show that the new slider has better dynamic characteristics and is more stable than the original designed slider. The optimization process also demonstrates that the optimum model and optimum method is effective.
基金Project(2012QNZT003)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2012M521542)supported by the Postdoctoral Science Foundation of China+1 种基金Project(14JJ3014)supported by the Hunan Provincial Natural Science Foundation of ChinaProject(BSh1202)supported by the Zhejiang Provincial Postdoctoral Scientific Research Foundation of China
文摘Arc erosion morphologies of Ag/MeO（10） electrical contact materials after 50000 operations under direct current of 19 V and 20 A and resistive load conditions were investigated using scanning electron microscope（SEM） and a 3D optical profiler（3DOP）. The results indicated that 3DOP could supply clearer and more detailed arc erosion morphology information. Arc erosion resistance of Ag/SnO_2（10） electrical contact material was the best and that of Ag/CuO（10） was the worst. Arc erosion morphology of Ag/MeO（10） electrical contact materials mainly included three different types. Arc erosion morphologies of Ag/ZnO（10） and Ag/SnO_2（10） electrical contact materials were mainly liquid splash and evaporation, and those of Ag/CuO（10） and Ag/CdO（10） were mainly material transfer from anode to cathode. Arc erosion morphology of Ag/SnO_2（6）In_2O_3（4） electrical contact materials included both liquid splash, evaporation and material transfer. In addition, the formation process and mechanism on arc erosion morphology of Ag/MeO（10） electrical contact materials were discussed.
文摘Nose deflection control is a new concept of fast response control model.The partial nose of projectile deflects a certain angle relative to the axis of projectile body and then pressure difference emerges on the windward and leeward sides of warhead.Consequently,aerodynamic control force is generated.This control way has high control efficiency and very good application prospects in the ammunition system.Nose deflection actuator based on smart material and structure enables projectile body morphing to obtain additional aerodynamic force and moment,changes the aerodynamic characteristics in the projectile flight process,produces the corresponding balance angle and sideslip angle resulting in motor overload,adjusts flight moving posture to control the ballistics,finally changes shooting range and improves firing accuracy.In order to study characteristics of self-adaptive control projectile,numerical simulations are conducted by using fluid dynamics software ANSYS FLUENT for stabilized rocket projectile.The aerodynamic characteristics at different nose delectation angles,different Mach numbers and different angles of attack are obtained and compared.The results show that the nose deflection control has great influence on the head of rocket projectile,and it causes the asymmetry of the flow field structure and the increase of pressure differences of the warhead on the windward and leeward surface,which results in a larger lift.Finally,ballistics experiments are done for verification.The results can offer theoretical basis for self-adaptive rocket projectile design and optimization and also provide new ideas and methods for field smart ammunition research.
文摘By elastic-plastic finite deformation finite element analysis (FEA), the conservation of J-integral is investigated in detail for a welded joint with an overmatchingweld in plane stress case. It is indicated that J-integral is path dependent under various conditions at least in the cases studied in this paper. Meanwhile, the above conclusions are verified by the hybrid method results in which combined Moire interferometry with FEA.
