[Objective] The aim was to research the processing technology of pomelo jelly with health-care function. [Method] With Citrus maxima （Burm.） Merr. cv. Guanxiyou as the raw materials, the optimal processing technolog...[Objective] The aim was to research the processing technology of pomelo jelly with health-care function. [Method] With Citrus maxima （Burm.） Merr. cv. Guanxiyou as the raw materials, the optimal processing technology of pomelo jelly with health-care function was obtained by orthogonal test based on the results of single factor test. [Result] The optimal processing technology of pomelo jelly with healthAugust 16, 2016care function was as follows： 30% pomelo juice, 15% sugar, 1.0% mixed gel and 0.19% citric acid. Under these conditions, the pomelo jelly had relatively good sensory status, with certain nutritional value and health care function. [Conclusion] This research provides references for the deep processing of pomelo.展开更多
The main mechanical properties of scrimber and Parallel Strand Lumber (PSL) were researched through techno-logical test. Experimental materials of scrimber are small log of Aspen, Dahurian larch and Birch. Experimenta...The main mechanical properties of scrimber and Parallel Strand Lumber (PSL) were researched through techno-logical test. Experimental materials of scrimber are small log of Aspen, Dahurian larch and Birch. Experimental materials of PSL come from fishtail veneer strips at plywood plant of Aspen and Birch. In the laboratory conditions low quality small log and wood residues can yield scrimber and PSL with high strength. After the technological conditions of scrimber were compared with that of PSL, the main factors of influencing their properties were separately pointed out and the reasons influencing proper-ties have been analyzed in this paper. The results showed that the hot-pressing pressure is an important technological factor for scrimber. The ratio of veneer-strand length to thickness is a key technological factor for PSL.展开更多
Micron-size superparamagnetic poly(styrene-divinylbenzene-glycidyl methacrylate) (PSt-DVB-GMA) spheres were prepared via a modified suspension copolymerization method. Oleic acid coated magnetite (Fe3O4 nanoparticles ...Micron-size superparamagnetic poly(styrene-divinylbenzene-glycidyl methacrylate) (PSt-DVB-GMA) spheres were prepared via a modified suspension copolymerization method. Oleic acid coated magnetite (Fe3O4 nanoparticles made by co-precipitation were first mixed with monomers of St, DVB, GMA, and benzoyl peroxide (BPO) to form oil in water suspension with the presence of poly(viny) pyrrolidone) (PVP-K30) as a stabilizer. Then the temperature of mixture was increased at a controlled rate to obtain small and relatively uniform droplets. Finally, the copolymerization reaction was initiated by the decomposition of BPO. The morphology and properties of magnetic PSt-DVB-GMA microspheres were examined by SEM, TEM, VSM, XRD and FT-IR. The magnetic microspheres obtained have very small size (about 4-7μm) in diameter with narrow size distribution and super-paramagnetic characteristics. Powder X-ray diffraction measurements show the inverse cubic spinel structure for the magnetite dispersed in polymer microspheres. FT-IR spectroscopy indicates extensive oxirane groups existed on the surface of magnetic PSt-DVB-GMA microspheres.展开更多
The self-cleaning glass coated with Fe3+-TiO2 photocatalytic thin film was prepared by sol-gel process from the system Ti（OC4H9）4-NH（C2H4OH）2-C2H5OH-H2O containing FeCl3. The microstructure and properties of the f...The self-cleaning glass coated with Fe3+-TiO2 photocatalytic thin film was prepared by sol-gel process from the system Ti（OC4H9）4-NH（C2H4OH）2-C2H5OH-H2O containing FeCl3. The microstructure and properties of the film were studied using differential thermal analysis-thermogravimetry（DTA-TG）, X-ray diffration（XRD） and scanning electron microscope（SEM）. The transmittance of the self-cleaning glass was measured by using UV-Vis spectrometer. The effects of content of Fe3+ and the thickness of Fe3+-TiO2 thin film on the photocatalytic activity were examined. The results show that the photocatalytic thin films are mainly composed of Fe3O4 and TiO2 particles within 10100 nm. The appropriate amount of Fe3+ is effective for improving the photocatalytic activities of TiO2. The best photocatalytic activity is obtained when the molar ratio of Fe3+ to TiO2 is 0.005 and the glass is coated with 9 layers.展开更多
The purification of lactic acid based on the esterification of raw lactic acid from fermentation broth and then the catalytic distillation hydrolysis of methyl lactate simultaneously to achieve pure lactic acid is rep...The purification of lactic acid based on the esterification of raw lactic acid from fermentation broth and then the catalytic distillation hydrolysis of methyl lactate simultaneously to achieve pure lactic acid is reported. The esterification kinetics of lactic acid with methanol catalyzed by strong-acid cation-exchange resins (Amberlyst-15,D001, D002, NKC, 002) was studied under the condition that simulates the real catalytic environment. Experimental results were correlated by a Langmuir-Hinselwood model and the nonideality of the solution was taken into account by using activities calculated by the universal quasichemical functional group activity coefficient (UNIFAC) method.A good agreement between the model and the experimental data was achieved. Continuous purification experiments were conducted to find the optimum column configuration and operation condition for the system. The effects of various parameters, e.g. the length of different section of the column, feed rate and ratio of reactants, packing material and catalyst type, were studied. This novel system shows good separation results in lab scale, and is potential for industrial application.展开更多
【Objective】To optimize the steam explosion process condition for extracting polysaccharides from Pseudostellaria heterophylla.【Method】The effects of steam pressure,pressure-maintaining time and material moisture c...【Objective】To optimize the steam explosion process condition for extracting polysaccharides from Pseudostellaria heterophylla.【Method】The effects of steam pressure,pressure-maintaining time and material moisture content on the extraction of polysaccharides from Pseudostellaria heterophylla were studied by response surface methodology based on Box-Behnken design.【Result】The findings showed that each factor could significantly affect the test index,and the optimum condition was as follows:steam pressure 1.50 Mpa,pressuremaintaining time 46 s and material moisture content 46%.Under this condition,the verified experimental value of polysaccharides from Pseudostellaria heterophylla was 39.32%,indicating a relative standard deviation of 2.73%from the predictive value.Meanwhile,scanning electron microcopy(SEM)images showed that the surface physical structure of Pseudostellaria heterophylla was irregularly broken and cracked,which means the physical structure of Pseudostellaria heterophylla was changed and destroyed at the cellular level.【Conclusion】This experiment provides a new approach for the extraction of polysaccharides from Pseudostellaria heterophylla,as well as a reference for the resource utilization of Pseudostellaria heterophylla.展开更多
A process of purification of coal-based coke powder as anode the treatment of coke powder with dilute hydrofluoric acid solution, for Li-ion batteries was attempted. The process started with followed by united-acid-le...A process of purification of coal-based coke powder as anode the treatment of coke powder with dilute hydrofluoric acid solution, for Li-ion batteries was attempted. The process started with followed by united-acid-leaching using sulfuric acid and hydrochloric acid. The effects of altering the hydrofluoric acid addition, hydrofluoric acid concentration, contact time, temperature and acid type were investigated. A minimum ash content of 0.35% was obtained when proper conditions were applied. The electrochemical performance of purified coke powder shows greatly improved electrochemical performance. The as-purified coke powder presented an initial reversible capacity of 257.4 mAh/g and a retention rate of 95% after 50 cycles. The proposed purification process paves a way to prepare a promising anode material with good performance with low cost of coke powder for Li-ion batteries.展开更多
Simultaneous dyeing and durable press finishing of cotton fabrics with acid dyes bearing the different molecule structure and durable press finishing agent (DP agent abbr.) based on modified DMDHEU were investigated b...Simultaneous dyeing and durable press finishing of cotton fabrics with acid dyes bearing the different molecule structure and durable press finishing agent (DP agent abbr.) based on modified DMDHEU were investigated by using the pad-dry-cure process. Some factors affecting the process, such as structure of acid dyes, DP agent, catalysts and curing temperature were discussed. The dyed and finished fabrics were evaluated with respect to color strength, fixation, crease recovery angle, breaking strength and fastness properties. The results indicate that structure of acid dyes has a striking effect on the color strength of dyed and finished cotton fabric. The color strength and dry crease recovery angle of dyed and finished cotton fabric increases, whereas breaking strength decreases with increasing concentration of DP agent. It is necessary for ammonium nitrate to serve as catalyst. It is found that relatively satisfactory properties of dyed and finished cotton fabric can be obtained with appropriate adjustment of treating conditions.展开更多
A complex process of micro electrolysis and biofilm was developed to continuously treat organic wastew-aters containing heavy metal ions such as Cu2+ and Or3+, and the relevant purifying mechanism was also addressed. ...A complex process of micro electrolysis and biofilm was developed to continuously treat organic wastew-aters containing heavy metal ions such as Cu2+ and Or3+, and the relevant purifying mechanism was also addressed. In detail, organic materials in wastewater could be consumed as nutritious source by biofilm composed of aerobes and anaerobes. However, for heavy metal ions (Cu2+, Cr3+), part was removed by electrodeposition, and some was adsorbed on biofilm. In order to compare with the combined process of micro electrolysis and biofilm, the experimental data of micro electrolysis process (intermittent) or biofilm process (continuous) were provided, and the kinetic data of C6H12O6 (glucose) biodegradation by cultured microbes or acclimated microbes were also obtained. These experimental results indicated that for wastewater initially consisted of CeH12O6 (500mg-L-1), Cu2+ and Cr3+ (10mg-L-1), after treatment, its concentrations of C6H12O6, Cu2+ and Cr3+ were lowered to the level of 55-65mg.L^1, and less than 1mg-L-1, respectively. And the industrial reused water standards could be met by treated wastewater.展开更多
文摘[Objective] The aim was to research the processing technology of pomelo jelly with health-care function. [Method] With Citrus maxima （Burm.） Merr. cv. Guanxiyou as the raw materials, the optimal processing technology of pomelo jelly with health-care function was obtained by orthogonal test based on the results of single factor test. [Result] The optimal processing technology of pomelo jelly with healthAugust 16, 2016care function was as follows： 30% pomelo juice, 15% sugar, 1.0% mixed gel and 0.19% citric acid. Under these conditions, the pomelo jelly had relatively good sensory status, with certain nutritional value and health care function. [Conclusion] This research provides references for the deep processing of pomelo.
文摘The main mechanical properties of scrimber and Parallel Strand Lumber (PSL) were researched through techno-logical test. Experimental materials of scrimber are small log of Aspen, Dahurian larch and Birch. Experimental materials of PSL come from fishtail veneer strips at plywood plant of Aspen and Birch. In the laboratory conditions low quality small log and wood residues can yield scrimber and PSL with high strength. After the technological conditions of scrimber were compared with that of PSL, the main factors of influencing their properties were separately pointed out and the reasons influencing proper-ties have been analyzed in this paper. The results showed that the hot-pressing pressure is an important technological factor for scrimber. The ratio of veneer-strand length to thickness is a key technological factor for PSL.
基金Supported by the High-Technology Research and Development Program of China(No.2002AA302211)and the National Natural science Foundation of China(No.20206032)
文摘Micron-size superparamagnetic poly(styrene-divinylbenzene-glycidyl methacrylate) (PSt-DVB-GMA) spheres were prepared via a modified suspension copolymerization method. Oleic acid coated magnetite (Fe3O4 nanoparticles made by co-precipitation were first mixed with monomers of St, DVB, GMA, and benzoyl peroxide (BPO) to form oil in water suspension with the presence of poly(viny) pyrrolidone) (PVP-K30) as a stabilizer. Then the temperature of mixture was increased at a controlled rate to obtain small and relatively uniform droplets. Finally, the copolymerization reaction was initiated by the decomposition of BPO. The morphology and properties of magnetic PSt-DVB-GMA microspheres were examined by SEM, TEM, VSM, XRD and FT-IR. The magnetic microspheres obtained have very small size (about 4-7μm) in diameter with narrow size distribution and super-paramagnetic characteristics. Powder X-ray diffraction measurements show the inverse cubic spinel structure for the magnetite dispersed in polymer microspheres. FT-IR spectroscopy indicates extensive oxirane groups existed on the surface of magnetic PSt-DVB-GMA microspheres.
文摘The self-cleaning glass coated with Fe3+-TiO2 photocatalytic thin film was prepared by sol-gel process from the system Ti（OC4H9）4-NH（C2H4OH）2-C2H5OH-H2O containing FeCl3. The microstructure and properties of the film were studied using differential thermal analysis-thermogravimetry（DTA-TG）, X-ray diffration（XRD） and scanning electron microscope（SEM）. The transmittance of the self-cleaning glass was measured by using UV-Vis spectrometer. The effects of content of Fe3+ and the thickness of Fe3+-TiO2 thin film on the photocatalytic activity were examined. The results show that the photocatalytic thin films are mainly composed of Fe3O4 and TiO2 particles within 10100 nm. The appropriate amount of Fe3+ is effective for improving the photocatalytic activities of TiO2. The best photocatalytic activity is obtained when the molar ratio of Fe3+ to TiO2 is 0.005 and the glass is coated with 9 layers.
文摘The purification of lactic acid based on the esterification of raw lactic acid from fermentation broth and then the catalytic distillation hydrolysis of methyl lactate simultaneously to achieve pure lactic acid is reported. The esterification kinetics of lactic acid with methanol catalyzed by strong-acid cation-exchange resins (Amberlyst-15,D001, D002, NKC, 002) was studied under the condition that simulates the real catalytic environment. Experimental results were correlated by a Langmuir-Hinselwood model and the nonideality of the solution was taken into account by using activities calculated by the universal quasichemical functional group activity coefficient (UNIFAC) method.A good agreement between the model and the experimental data was achieved. Continuous purification experiments were conducted to find the optimum column configuration and operation condition for the system. The effects of various parameters, e.g. the length of different section of the column, feed rate and ratio of reactants, packing material and catalyst type, were studied. This novel system shows good separation results in lab scale, and is potential for industrial application.
文摘【Objective】To optimize the steam explosion process condition for extracting polysaccharides from Pseudostellaria heterophylla.【Method】The effects of steam pressure,pressure-maintaining time and material moisture content on the extraction of polysaccharides from Pseudostellaria heterophylla were studied by response surface methodology based on Box-Behnken design.【Result】The findings showed that each factor could significantly affect the test index,and the optimum condition was as follows:steam pressure 1.50 Mpa,pressuremaintaining time 46 s and material moisture content 46%.Under this condition,the verified experimental value of polysaccharides from Pseudostellaria heterophylla was 39.32%,indicating a relative standard deviation of 2.73%from the predictive value.Meanwhile,scanning electron microcopy(SEM)images showed that the surface physical structure of Pseudostellaria heterophylla was irregularly broken and cracked,which means the physical structure of Pseudostellaria heterophylla was changed and destroyed at the cellular level.【Conclusion】This experiment provides a new approach for the extraction of polysaccharides from Pseudostellaria heterophylla,as well as a reference for the resource utilization of Pseudostellaria heterophylla.
基金Projects(51274240,51204209) supported by the National Natural Science Foundation of ChinaProject(2012M521545) supported by the National Postdoctoral Science Foundation of China
文摘A process of purification of coal-based coke powder as anode the treatment of coke powder with dilute hydrofluoric acid solution, for Li-ion batteries was attempted. The process started with followed by united-acid-leaching using sulfuric acid and hydrochloric acid. The effects of altering the hydrofluoric acid addition, hydrofluoric acid concentration, contact time, temperature and acid type were investigated. A minimum ash content of 0.35% was obtained when proper conditions were applied. The electrochemical performance of purified coke powder shows greatly improved electrochemical performance. The as-purified coke powder presented an initial reversible capacity of 257.4 mAh/g and a retention rate of 95% after 50 cycles. The proposed purification process paves a way to prepare a promising anode material with good performance with low cost of coke powder for Li-ion batteries.
文摘Simultaneous dyeing and durable press finishing of cotton fabrics with acid dyes bearing the different molecule structure and durable press finishing agent (DP agent abbr.) based on modified DMDHEU were investigated by using the pad-dry-cure process. Some factors affecting the process, such as structure of acid dyes, DP agent, catalysts and curing temperature were discussed. The dyed and finished fabrics were evaluated with respect to color strength, fixation, crease recovery angle, breaking strength and fastness properties. The results indicate that structure of acid dyes has a striking effect on the color strength of dyed and finished cotton fabric. The color strength and dry crease recovery angle of dyed and finished cotton fabric increases, whereas breaking strength decreases with increasing concentration of DP agent. It is necessary for ammonium nitrate to serve as catalyst. It is found that relatively satisfactory properties of dyed and finished cotton fabric can be obtained with appropriate adjustment of treating conditions.
基金Supported by the Natural Science Foundation of Tianjin,China(No.013802911).
文摘A complex process of micro electrolysis and biofilm was developed to continuously treat organic wastew-aters containing heavy metal ions such as Cu2+ and Or3+, and the relevant purifying mechanism was also addressed. In detail, organic materials in wastewater could be consumed as nutritious source by biofilm composed of aerobes and anaerobes. However, for heavy metal ions (Cu2+, Cr3+), part was removed by electrodeposition, and some was adsorbed on biofilm. In order to compare with the combined process of micro electrolysis and biofilm, the experimental data of micro electrolysis process (intermittent) or biofilm process (continuous) were provided, and the kinetic data of C6H12O6 (glucose) biodegradation by cultured microbes or acclimated microbes were also obtained. These experimental results indicated that for wastewater initially consisted of CeH12O6 (500mg-L-1), Cu2+ and Cr3+ (10mg-L-1), after treatment, its concentrations of C6H12O6, Cu2+ and Cr3+ were lowered to the level of 55-65mg.L^1, and less than 1mg-L-1, respectively. And the industrial reused water standards could be met by treated wastewater.
