A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip'...A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip's cross section (crown) to express the shape control ability of rolling mill. With the mathematical models and simulation software that were developed by the authors' own models, four types of mills were aimed, including HCM (6-high middle rolls shift type HC (high crown) -mill), HCMW (6-high middle rolls and work rolls shift type HC-mill), UCM (6-high middle rolls shift type HC-mill with middle roll bender) and UCMW (6-high middle rolls and work rolls shift type HC-mill with middle roll bender), and the shape and crown control ability of every mill type was analyzed and compared. An appropriate arrangement mode of tandem mill was brought forward. The results show that UCMW mill is a perfect choice for controlling shape and crown, and the area of control characteristics curve of UCMW (or UCM) is twice than that of HCM, but UCM mill is also a good choice for its simple frame. In other word, the shape and crown controlling ability of UCMW mill is better than that of UCM mill, but the frame of UCM mill is simpler than that of UCMW mill. As for the final type of mill, should be synthetically decided by thinking over fund and equipment technology.展开更多
In many gasliquid processes, the initial bubble size is determined by a series of operation parameters along with the sparger design and gasliquid flow pattern. Bubble formation models for variant gasliquid flow pat t...In many gasliquid processes, the initial bubble size is determined by a series of operation parameters along with the sparger design and gasliquid flow pattern. Bubble formation models for variant gasliquid flow pat terns have been developed based on force balance. The effects of the orientation of gasliquid flow, gas velocity, liquid velocity and orifice diameter on the initial bubble size have been clarified. In ambient airwater system, thesultable gasllquid flow pattern is important to obtain smaller bubbles under the low velocity liquid crossflow con ditions with stainless steel spargers. Among the four types of gasliquid flow patterns discussed, the horizontal orifice in a vertically upward liquid flow produces the smallest initial bubbles. However the orientation effects of gas and liquid flow are found tobe insgnifican whenliq.uid velocity is.higher than. 3.2 m;sa or theorifice diameter is small enough.展开更多
The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification...The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification and discharge at the interface under certain condition. It is of significant importance to take an insight into the phenomenon occurring at the interface. Through experiment, the pressboard is found as a porous material. The interface changes abruptly from bulk pressboard to the bulk oil as a result of the porous structure. A new model is proposed which divides the interface into bulk oil region, transition region, and bulk pressboard region. The width of the transition region is decided according to the microtome figure. The effective permittivity of the transition region is calculated using a new model based on fractal theory. The model is validated and compared with previous calculation model. The effect of the existence of transition region on the electric field distribution is discussed.展开更多
Experimental and numerical researches were conducted to investigate the cooling performance of a single row of consoles （converging slot-hole） on a large-scale flat-plate model. The results show that the coolant flo...Experimental and numerical researches were conducted to investigate the cooling performance of a single row of consoles （converging slot-hole） on a large-scale flat-plate model. The results show that the coolant flow from a row of consoles shows good lateral uniformity of adiabatic effectiveness, with regions of slightly enhanced cooling occurring between the consoles. For the console cooling geometry, the interaction between coolant jet from inclined console and the mainstream flow results in reasonable vortices configuration. A pair of counter rotating vortices originate from the edge of slot, not from the centerline of film holes and the rotating direction is contrary to conventional cylindrical hole. The heat transfer coefficient ratio is a tittle bigger for the console case than conventional cylindrical hole, and the discharge coefficient for a console is larger than that for cylindrical film cooling hole.展开更多
Projectile perforation of concrete slabs will produce numerous concrete fragments on the rear face of the concrete slabs. These concrete fragments will cause serious secondary damage to the indoor personnel and equipm...Projectile perforation of concrete slabs will produce numerous concrete fragments on the rear face of the concrete slabs. These concrete fragments will cause serious secondary damage to the indoor personnel and equipment of protective structures.Accurately evaluating the damage area of concrete slabs is an important problem. Therefore, a theoretical model of a rigid projectile perforation of concrete slabs is constructed using the energy method in this paper. In this model, a new shear failure method is proposed to calculate the energy consumption of the shear formation by combining with the von-Mises failure criterion and failure strain. Based on the energy conservation and principle of minimum potential energy, explicit equations for the perforation performance are formulated. The theoretical predictions agree well with the experimental results. Furthermore,experiments on a high-speed projectile normal perforation of concrete are carried out to verify the accuracy of the corresponding theoretical prediction.展开更多
基金Project (50374058) supported by the National Natural Science Foundation of China and Shanghai Baosteel Group Co.
文摘A theoretical method for selecting strip rolling mill type that considered shape control ability was established using the figure alteration range that was worked by the alteration track of vector expressing strip's cross section (crown) to express the shape control ability of rolling mill. With the mathematical models and simulation software that were developed by the authors' own models, four types of mills were aimed, including HCM (6-high middle rolls shift type HC (high crown) -mill), HCMW (6-high middle rolls and work rolls shift type HC-mill), UCM (6-high middle rolls shift type HC-mill with middle roll bender) and UCMW (6-high middle rolls and work rolls shift type HC-mill with middle roll bender), and the shape and crown control ability of every mill type was analyzed and compared. An appropriate arrangement mode of tandem mill was brought forward. The results show that UCMW mill is a perfect choice for controlling shape and crown, and the area of control characteristics curve of UCMW (or UCM) is twice than that of HCM, but UCM mill is also a good choice for its simple frame. In other word, the shape and crown controlling ability of UCMW mill is better than that of UCM mill, but the frame of UCM mill is simpler than that of UCMW mill. As for the final type of mill, should be synthetically decided by thinking over fund and equipment technology.
基金Supported by the National Natural Science Foundation of China （20736009）.
文摘In many gasliquid processes, the initial bubble size is determined by a series of operation parameters along with the sparger design and gasliquid flow pattern. Bubble formation models for variant gasliquid flow pat terns have been developed based on force balance. The effects of the orientation of gasliquid flow, gas velocity, liquid velocity and orifice diameter on the initial bubble size have been clarified. In ambient airwater system, thesultable gasllquid flow pattern is important to obtain smaller bubbles under the low velocity liquid crossflow con ditions with stainless steel spargers. Among the four types of gasliquid flow patterns discussed, the horizontal orifice in a vertically upward liquid flow produces the smallest initial bubbles. However the orientation effects of gas and liquid flow are found tobe insgnifican whenliq.uid velocity is.higher than. 3.2 m;sa or theorifice diameter is small enough.
基金Project(2009CB724504)supported by the National Basic Research Program of China
文摘The oil-pressboard insulation is a typical composite insulation system widely used in the design and manufactory of large power apparatus. The implement of oil-pressboard insulation may lead to surface electrification and discharge at the interface under certain condition. It is of significant importance to take an insight into the phenomenon occurring at the interface. Through experiment, the pressboard is found as a porous material. The interface changes abruptly from bulk pressboard to the bulk oil as a result of the porous structure. A new model is proposed which divides the interface into bulk oil region, transition region, and bulk pressboard region. The width of the transition region is decided according to the microtome figure. The effective permittivity of the transition region is calculated using a new model based on fractal theory. The model is validated and compared with previous calculation model. The effect of the existence of transition region on the electric field distribution is discussed.
基金supported by the National Natural Science Foundation of China (Grant No. 50876041)
文摘Experimental and numerical researches were conducted to investigate the cooling performance of a single row of consoles （converging slot-hole） on a large-scale flat-plate model. The results show that the coolant flow from a row of consoles shows good lateral uniformity of adiabatic effectiveness, with regions of slightly enhanced cooling occurring between the consoles. For the console cooling geometry, the interaction between coolant jet from inclined console and the mainstream flow results in reasonable vortices configuration. A pair of counter rotating vortices originate from the edge of slot, not from the centerline of film holes and the rotating direction is contrary to conventional cylindrical hole. The heat transfer coefficient ratio is a tittle bigger for the console case than conventional cylindrical hole, and the discharge coefficient for a console is larger than that for cylindrical film cooling hole.
基金supported by the National Natural Science Foundation of China(Grant Nos.11390362&11521062)
文摘Projectile perforation of concrete slabs will produce numerous concrete fragments on the rear face of the concrete slabs. These concrete fragments will cause serious secondary damage to the indoor personnel and equipment of protective structures.Accurately evaluating the damage area of concrete slabs is an important problem. Therefore, a theoretical model of a rigid projectile perforation of concrete slabs is constructed using the energy method in this paper. In this model, a new shear failure method is proposed to calculate the energy consumption of the shear formation by combining with the von-Mises failure criterion and failure strain. Based on the energy conservation and principle of minimum potential energy, explicit equations for the perforation performance are formulated. The theoretical predictions agree well with the experimental results. Furthermore,experiments on a high-speed projectile normal perforation of concrete are carried out to verify the accuracy of the corresponding theoretical prediction.
