连轧管孔型系的辊缝调节量

当利用调节辊缝未获得要求的管子壁厚时,将会增大管子横向壁厚不均,损失轧管精度。研究了连轧管孔型系的辊缝调节量计算方法及其对管子横向壁厚不均的影响,给出了计算模型和实例。

国产十五道次三辊铝杆连轧机新孔型设计

本设计采用以平三角为主体的平三角—圆孔型系,取代沿用30多年的弧三角—圆孔型系。根据轧制规律,选用合理的延伸系数和填充率,系统地校核了张力系数,减少了断锭堆料事故,改善和提高了铝杆的力学性能,延长了轧辊使用寿命,降低了产品的制造成本。

Performance of water-coupled charge blasting under different in-situ stresses

Water-coupled charge blasting is a promising technique to efficiently break rock masses.In this study,numerical models of double boreholes with water-coupled charge are established using LS-DYNA and are calibrated by the tests of rock masses subjected to explosion loads to examine its performance.The crack levels of rock mass induced by water-coupled charge blasting and air-coupled charge blasting are first compared.It is found that water-coupled charge blasting is more appropriate to fracture deep rock mass than air-coupled charge blasting.In addition,the effects of rock properties,water-coupled charge coefficients,and borehole connection angles on the performance of water-coupled charge blasting are investigated.The results show that rock properties and water-coupled charge coefficients can greatly influence the crack and fragmentation levels of rock mass induced by water-coupled charge blasting under uniform and non-uniform in-situ stresses.However,changing borehole-connection angles can only affect crack and fragmentation levels of rock mass under non-uniform in-situ stresses but barely affect those under uniform in-situ stresses.A formula is finally proposed by considering the above-mentioned factors to provide the design suggestion of water-coupled charge blasting to fracture rock mass with different in-situ stresses.

Successful application of optimized aperture based CRS stack in the Shengli exploration area

The common reflection surface （CRS） stack is based on the local dip of the reflector and the reflection response within the first Fresnel zone. During the CRS stack all the information given by a multi-coverage reflection dataset can be successfully utilized. By now, it is known as the best zero-offset （ZO） imaging method. In this paper high quality CRS kinematic parameter sections are obtained by a modified CRS optimization strategy. Then stack apertures are calculated using the parameter sections which finally results in the realization of the CRS stack based on optimized aperture. Thus the advantages of CRS parameters are fully developed. Application to model and real seismic data reveals that, compared with the image section by a conventional CRS stack, the image section by CRS stack based on an optimized aperture improves both the signal-to-noise ratio and the continuity of reflection events.

Cavity 3D modeling and correlative techniques based on cavity monitoring

According to the mining method for Dongguashan Copper Mine and Tongkeng Mine in China, and with the help of the cavity monitoring system（CMS） and mining software Surpac, the 3D cavity models were established exactly. A series of correlative techniques for calculating stope over-excavation and under-excavation, stope dilution and ore loss rates, and the blasting design of the pillar with complicated irregular boundaries were developed. These techniques were applied in Dongguashan Copper Mine and Tongkeng Mine successfully. Using these techniques, the dilution rates of stopes 52-2^#, 52-6^#, 52-8^#and 52-10^# of Dongguashan Copper Mine are calculated to be 2.12%, 8.46%, 12-67% and 10.68%, respectively, and the ore loss rates of stopes 52-6^# and 5-8^# are 4.41% and 3.70%, severally. Furthermore, according to the design accomplished by the technique for a pillar of Tongkeng Mine with irregular boundary, the volume, total length of boreholes and the dynamite quantity of the pillar are computed to be 1.2 ×10^4 m^3, 2.98 km and 10.97 t, correspondingly.

Study on water saturation computation models in complex pore volcanic reservoir

Determination of water saturation is important for reservoir evaluation. When complex pore structures such as fracture and cavity are present in reservoir, Archie equation is no longer suitable. According to different models of pore structure division, the authors studied water saturation conlputation models. The results show that dual porosity system is divided into four models. The first model is based on dual laterolog, the second is Dual Porosity I , the third is Dual Porosity Ⅱ , and the last one is based on the conductive pore. Besides, the triple porosity system is triple porosity model. Compute water saturation was using all the above five models in volcanic reservoir in Songnan gas field. The triple porosity system is the most suitable model for water saturation computation in complex pore structure volcanic reservoir.