The shales of the Qiongzhusi Formation and Wufeng-Longmaxi Formations at Sichuan Basin and surrounding areas are presently the most important stratigraphic horizons for shale gas exploration and development in China. ...The shales of the Qiongzhusi Formation and Wufeng-Longmaxi Formations at Sichuan Basin and surrounding areas are presently the most important stratigraphic horizons for shale gas exploration and development in China. However, the regional characteristics of the seismic elastic properties need to be better determined. The ultrasonic velocities of shale samples were measured under dry conditions and the relations between elastic properties and petrology were systemically analyzed. The results suggest that 1） the effective porosity is positively correlated with clay content but negatively correlated with brittle minerals, 2） the dry shale matrix consists of clays, quartz, feldspars, and carbonates, and 3） organic matter and pyrite are in the pore spaces, weakly coupled with the shale matrix. Thus, by assuming that all connected pores are only present in the clay minerals and using the Gassmann substitution method to calculate the elastic effect of organic matter and pyrite in the pores, a relatively simple rock-physics model was constructed by combining the self-consistent approximation （SCA）, the differential effective medium （DEM）, and Gassmann＇s equation. In addition, the effective pore aspect ratio was adopted from the sample averages or estimated from the carbonate content. The proposed model was used to predict the P-wave velocities and generally matched the ultrasonic measurements very well.展开更多
Uniaxial tensile tests and scanning electron microscopy(SEM)experiments were carried out on the porous FeAl intermetallics(porosities of 41.1%,44.2%and 49.3%,pore size of 15−30μm)prepared by our research group to stu...Uniaxial tensile tests and scanning electron microscopy(SEM)experiments were carried out on the porous FeAl intermetallics(porosities of 41.1%,44.2%and 49.3%,pore size of 15−30μm)prepared by our research group to study the macroscopic mechanical properties and microscopic failure mechanism.The results show that the tensileσ−εcurves of the porous FeAl with different porosities can be divided into four stages:elasticity,yielding,strengthening and failure,without necking phenomenon.The elastic modulus,ultimate strength and elongation decrease with the increase of porosity and the elongation is much lower than 5%.A macroscopic brittle fracture appears,and the microscopic fracture mechanism is mainly intergranular fracture,depending on the Al content in the dense FeAl intermetallics.In addition,the stochastic porous model(SPM)with random pore structure size and distribution is established by designing a self-compiling generation program in FORTRAN language.Combined with the secondary development platform of finite element software ANSYS,the effective elastic moduli of the porous FeAl can be determined by elastic analysis of SPM and they are close to the experimental values,which can verify the validity of the established SPM for analyzing the elastic properties of the porous material.展开更多
Carbonate,tight sandstone,and shale reservoirs have many pore types,and the relationship between the porosity and elastic parameters is extremely discrete due to the complex pore shape.This paper presents a method for...Carbonate,tight sandstone,and shale reservoirs have many pore types,and the relationship between the porosity and elastic parameters is extremely discrete due to the complex pore shape.This paper presents a method for predicting reservoir pore types based on pore shape substitution.The pore shape substitution allows for accurately characterizing the changes in the elastic properties of the rock with the changes in pore shape,assuming there are no changes in terms of minerals,porosity,or fl uids.By employing a multiple-porosity variable critical porosity model,the eff ective pore aspect ratio could be inverted from the velocities of the rock.To perform pore shape substitution,we could replace the eff ective pore aspect ratio with another pore aspect ratio or increase/decrease the volume content of diff erent pore shapes.The reservoir pore types could be evaluated by comparing the differences in the reservoir velocities before and after the substitution of the pore shape.The test results pertaining to the theoretical model and the well logging data indicated that the pore shape substitution method could be applied to characterize pore types in terms of separating the eff ects of the pore shapes from the eff ects of the minerals,porosity,or fl uids on the velocities.展开更多
基金sponsored by the National Natural Science Foundation of China(No.41274185 and 41676032)
文摘The shales of the Qiongzhusi Formation and Wufeng-Longmaxi Formations at Sichuan Basin and surrounding areas are presently the most important stratigraphic horizons for shale gas exploration and development in China. However, the regional characteristics of the seismic elastic properties need to be better determined. The ultrasonic velocities of shale samples were measured under dry conditions and the relations between elastic properties and petrology were systemically analyzed. The results suggest that 1） the effective porosity is positively correlated with clay content but negatively correlated with brittle minerals, 2） the dry shale matrix consists of clays, quartz, feldspars, and carbonates, and 3） organic matter and pyrite are in the pore spaces, weakly coupled with the shale matrix. Thus, by assuming that all connected pores are only present in the clay minerals and using the Gassmann substitution method to calculate the elastic effect of organic matter and pyrite in the pores, a relatively simple rock-physics model was constructed by combining the self-consistent approximation （SCA）, the differential effective medium （DEM）, and Gassmann＇s equation. In addition, the effective pore aspect ratio was adopted from the sample averages or estimated from the carbonate content. The proposed model was used to predict the P-wave velocities and generally matched the ultrasonic measurements very well.
基金Project(11502307)supported by the National Natural Science Foundation of ChinaProject(2016JJ3187)supported by the Natural Science Foundation of Hunan Province,ChinaProject(50825102)supported by the National Natural Science Funds for Distinguished Young Scholar of China。
文摘Uniaxial tensile tests and scanning electron microscopy(SEM)experiments were carried out on the porous FeAl intermetallics(porosities of 41.1%,44.2%and 49.3%,pore size of 15−30μm)prepared by our research group to study the macroscopic mechanical properties and microscopic failure mechanism.The results show that the tensileσ−εcurves of the porous FeAl with different porosities can be divided into four stages:elasticity,yielding,strengthening and failure,without necking phenomenon.The elastic modulus,ultimate strength and elongation decrease with the increase of porosity and the elongation is much lower than 5%.A macroscopic brittle fracture appears,and the microscopic fracture mechanism is mainly intergranular fracture,depending on the Al content in the dense FeAl intermetallics.In addition,the stochastic porous model(SPM)with random pore structure size and distribution is established by designing a self-compiling generation program in FORTRAN language.Combined with the secondary development platform of finite element software ANSYS,the effective elastic moduli of the porous FeAl can be determined by elastic analysis of SPM and they are close to the experimental values,which can verify the validity of the established SPM for analyzing the elastic properties of the porous material.
基金the National Natural Science Foundation of China(Nos.42074136,41674130)National Key S&T Special Project of China(No.2016ZX05027-004-001)the Fundamental Research Funds for the Central University(No.18CX02061A).
文摘Carbonate,tight sandstone,and shale reservoirs have many pore types,and the relationship between the porosity and elastic parameters is extremely discrete due to the complex pore shape.This paper presents a method for predicting reservoir pore types based on pore shape substitution.The pore shape substitution allows for accurately characterizing the changes in the elastic properties of the rock with the changes in pore shape,assuming there are no changes in terms of minerals,porosity,or fl uids.By employing a multiple-porosity variable critical porosity model,the eff ective pore aspect ratio could be inverted from the velocities of the rock.To perform pore shape substitution,we could replace the eff ective pore aspect ratio with another pore aspect ratio or increase/decrease the volume content of diff erent pore shapes.The reservoir pore types could be evaluated by comparing the differences in the reservoir velocities before and after the substitution of the pore shape.The test results pertaining to the theoretical model and the well logging data indicated that the pore shape substitution method could be applied to characterize pore types in terms of separating the eff ects of the pore shapes from the eff ects of the minerals,porosity,or fl uids on the velocities.
