利用字理图创设情境进行象形字教学的策略

象形字笔画简单,表意直白,往往会被教师忽略成＂不教也会＂的内容,使得学生只是认识笔画,而不认识事物,最终对识字失去兴趣。象形字作为识字之始,必须结合字理图,才能更好地将汉字形义结合。只有图字对照,记忆关键笔画,创设出各种学生喜欢的情境,才能让学生在学字之初体会到汉字的形体美,从而激发识字兴趣。

图文结合,优化语文教学

在小学阶段,教师根据学生的年龄特点,采取图文结合的方式展开教学,不仅可以提高学生的写字和阅读能力,而且可以帮助学生有效把握课文脉络,提升学生随文练笔的效率。教学中,教师可以运用字理图创设识字情境,运用示意图引导感情朗读,借助结构图帮助学生把握课文脉络,借助思维导图推进随文练笔。这样就能提高语文教学效率。

基于无线传感器网络定位技术的图书馆智能管理创新

"互联网+"时代,信息技术的发展对图书馆的智能化管理工作提出了更高的要求。文章概述了无线传感器网络与定位技术,重点讨论了如何将WSN定位技术运用到图书智能管理,通过定位技术与大数据、云计算等信息技术的结合,推动图书馆智能系统建设和智能化发展。

Method for eliminating zero-order image in digital holography

For eliminating the zero-order image in digital holography, a new method using the differential of the hologram intensity instead of the hologram itself for numerical reconstruction is proposed. This method is based on digital image processing. By analyzing the spatial spectrum of the off-axis digital hologram, it theoretically proves that the zero-order image can be effectively eliminated by differential before reconstruction. Then, the detected hologram is processed in the program with differential and reconstruction. Both the theoretical analysis and digital reconstruction results show that it can effectively eliminate the large bright spot in the center of the reconstructed image caused by the zero-order image, improve the image quality significantly, and render a better contrast of the reconstructed image. This method is very simple and convenient due to no superfluous optical elements and requiring only one time record.

APPLICATION OF IMAGE PROCESSING TECHNIQUE IN SPM SYSTEM

Up to now the imported commercial scanning probe microscope(SPM) has not an automatic error correcting and reducing system.In this paper a software system is presented to solve this problem.This software system gives the average distance between the centers of mass of two adjacent atoms on the same horizontal line and its mean square root as well as the atoms shape and center of mass by filtering the measured image of a standard sample-highly oriented pyrolysis graphite(HOPG).This system forms the basis of SPMs automatic measurement error correcting.

Measuring the Condition of Parking Lot by Image Processing

Aim To study the parking management in the condition of vehicles' increasing. Methods The methods of pattern recognition and image processing were used to analyze the eigenvalues of parking lot images. Results The automatic identification of every parking place in the parking plot was realized. The automatic measuring of parked vehicle count and parking lot utilization was completed. Conclusion It can complete the real time recognition, and has some practicabilities.

Global Memory Net and the development of digital image information management system: Experience and practice

Global Memory Net (GMNet) is intended to be an effective gateway to the world cultural, historical, and heritage image collections from selected academic educational and research partners in the world. Much of these unique collections of great value to education and research are not currently accessible due to distance, form, and technical barriers. This project is to find new ways to enable users to access and exploit these significant research collections via global network. As GMNet is ending its first 5-year phase in October 2005, it has contributed substantially to the community building in digital library development by ac- commodating numerous collaborators and technical staff from various parts of the world to spend 3 to 5 months as a full-member of the GMNet team in Boston. They have come from different parts of China—such as Sichuan, Hainan, Shanghai and Xi’an; Croatia; and Hanoi, Vietnam. In addition to contribute to the overall system development and enhancement of system function- alities, they have brought valuable sample image collections of their own institutions/countries, and actually developed prototype collections as a part of GMNet. This paper describes the exciting and productive experience of the first of this visiting research group in developing the GMNet’s Version 2.0 PHP-based system under Prof. Chen’s overall supervision. It also describes both the system’s technical level structure—user/Web-based application/data, and complex functionalities with multi-collection, multi-lingual, multi-modal searching capabilities; system management capabilities; as well as provisions for user uploads and retrieval for our own projects. This Version 2.0 system is built on the Linux/Apache/PHP/MySQL platform. What is described in this paper is an actual case which has formed a base for further new development by others in the research group. It demonstrates fully the value of the synergistic collaboration among global partners for universal digital library development. More information can be found in http://www.memorynet.org/.

Shape characterization of sand particles based on digital image processing technology

To characterize the shape of sand particles for concrete,a new method is proposed based on digital image processing(known as the DIP method).By analyzing sand particles projection,the length,width and thickness of sand were measured to characterize particle form.The area and perimeter were measured to characterize particle angularity.The results of the DIP method and Vernier caliper were compared to examine the accuracy of the DIP method.The sample size test was conducted to show the statistical significance of shape results measured by the DIP method.The practicality of the DIP method was verified by instance analysis.The results show that aspect ratios and roundness measured by the DIP method are equal to ones by the Vernier caliper.Results by DIP are dependent on the sand particle number,and at least 350 particles should be measured to represent the overall shape property of sand.The results show that the DIP method is able to distinguish the differences in the shape of sand particles.It achieves the direct measurement of sand particle thickness,and the characterization results of sand aspect ratios and roundness are accurate,statistically significant and practical.Therefore,the DIP method is suitable for sand particle shape characterization.

Spatial/temporal indexing and information visualization genre for environmental digital libraries

Protecting and preserving our environmental systems require the ability to understand the spatio-temporal distri- bution of soils, parent material, topography, and land cover as well as the effects of human activities on ecosystems. Space-time modelling of ecosystems in an environmental digital library is essential for visualizing past, present, and future impacts of changes occurring within such landscapes (e.g., shift in land use practices). In this paper, we describe three novel features, spa- tio-temporal indexing, visualization, and geostatistical genre, for the environmental digital library, Environmental Visualization and Geographic Enterprise System (ENVISAGE), currently in progress at the University of Florida.

Identification of rice seed varieties using neural network

A digital image analysis algorithm based color and morphological features was developed to identify the six varieties （ey7954, syz3, xsl 1, xy5968, xy9308, z903） rice seeds which are widely planted in Zhejiang Province. Seven color and fourteen morphological features were used for discriminant analysis, Two hundred and forty kernels used as the training data set and sixty kernels as the test data set in the neural network used to identify rice seed varieties. When the model was tested on the test data set, the identification accuracies were 90.00%, 88.00%, 95.00%, 82.00%, 74.00%, 80.00% for ey7954, syz3, xsl1, xy5968, xy9308, z903 respectively.

Discussion research of digital construction of mine

Analyzed and compared with some digitizeed mine build state first.Secondly analyzed opportunity and challenge that the Chinese mine faces,and pointed out certainty and necessity of building digitization of mine,Summarized the present task that charac- teristic,DM,MGIS of the digital mine develop and construct and employ finally,and carry on the summary to structure and function of the component mine integrated information system.

Model heat source using actual distribution of laser power density for simulation of laser processing

The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although various modifications of heat sources in the aspect of absorption process of laser by materials have been purposed, the distribution of laser power density(DLPD) in MHS is still modeled theoretically. However, in the actual situations of laser processing, the DLPD is definitely different from the ideal models. So, it is indispensable to build MHS using actual DLPD to improve the accuracy of simulation results. Besides, an automatic modeling method will be benefit to simplify the tedious pre-processing of simulations. This paper presents a modeling method and corresponding algorithm to model heat source using measured DLPD. This algorithm automatically processes original data to get modeling parameters and provides a step MHS combining with absorption models. Simulations and experiments of heat transfer in steel plates irradiated by laser prove the mothed and the step MHS. Moreover, the investigations of laser induced thermal-crack propagation in glass highlight the signification of modeling heat source based on actual DLPD and demonstrate the enormous application of this method in the simulation of laser processing.

Digitalization Modeling System for Constitutive Relation of Geomaterial

A digital modeling system method is put forward for modeling constitutive relation of geomaterial including digital image subsystem for deformation measurement, numerical modeling subsystem and numerical simulation subsystem. A non-contact measurement method based on digital image processing is introduced to improve measurement of specimen deformation. Based on the method, a series of conventional tri-axial compression tests under diverse stress paths are done. Then an elasto-plastic constitutive model of soil is acquired through the numerical method of modeling constitutive law for geomaterial. Two examples of specimen deformation and ground subsidence are presented and discussed. It indicated that this method can rationally simulate the stress-strain relationship of soil, which reflects the effect of stress path on soil stress-strain relationship.

Mesomechanics coal experiment and an elastic-brittle damage model based on texture features

To accurately describe damage within coal, digital image processing technology was used to determine texture parameters and obtain quantitative information related to coal meso-cracks. The relationship between damage and mesoscopic information for coal under compression was then analysed. The shape and distribution of damage were comprehensively considered in a defined damage variable, which was based on the texture characteristic. An elastic-brittle damage model based on the mesostructure information of coal was established. As a result, the damage model can appropriately and reliably replicate the processes of initiation, expansion, cut-through and eventual destruction of microscopic damage to coal under compression. After comparison, it was proved that the predicted overall stress-strain response of the model was comparable to the experimental result.

Numerical simulation of direct shear tests on mechanical properties of talus deposits based on self-adaptive PCNN digital image processing

The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of talus deposits that widely exist in the hydro-power engineering in the southwest of China were first reconstructed by small particles according to the in-situ photographs based on the self-adaptive PCNN digital image processing,and then numerical direct shear tests were carried out for studying the mechanical properties of talus deposits.Results indicate that the reconstructed meso-structures of talus deposits are more consistent with the actual situation because the self-adaptive PCNN digital image processing has a higher discrimination in the details of soil-rock segmentation.The existence and random distribution of rock blocks make the initial shear stiffness,the peak strength and the residual strength higher than those of the "pure soil" with particle size less than 1.25 cm apparently,but reduce the displacements required for the talus deposits reaching its peak shear strength.The increase of rock proportion causes a significant improvement in the internal friction angle of talus deposit,which to a certain degree leads to the characteristics of shear stress-displacement curves having a changing trend from the plastic strain softening deformation to the nonlinear strain hardening deformation,while an unconspicuous increase in cohesion.The uncertainty and heterogeneity of rock distributions cause the differences of rock proportion within shear zone,leading to a relatively strong fluctuation in peak strengths during the shear process,while movement features of rock blocks,such as translation,rotation and crossing,expand the scope of shear zone,increase the required shear force,and also directly lead to the misjudgment that the lower shear strength is obtained from the samples with high rock proportion.That,however,just explains the reason why the shear strength gained from a small amount of indoor test data is not consistent with engineering practice.

Machine vision inspection of rice seed based on Hough transform

A machine vision system was developed to inspect the quality of rice seeds. Five varieties of Jinyou402, Shanyou10, Zhongyou207, Jiayou and IIyou were evaluated. The images of both sides of rice seed with black background and white background were acquired with the image processing system for identifying external features of rice seeds. Five image sets consisting of 600 original images each were obtained. Then a digital image processing algorithm based on Hough transform was developed to inspect the rice seeds with incompletely closed glumes. The algorithm was implemented with all image sets using a Matlab 6.5 procedure. The results showed that the algorithm achieved an average accuracy of 96% for normal seeds, 92% for seeds with fine fissure and 87% for seeds with incompletely closed glumes. The algorithm was proved to be applicable to different seed varieties and insensitive to the color of the background.

New Measurement of Swaying Quantity and Multi-barrel Parallelism for Rocket Launcher

By analyzing the deficiencies of the method, a measurement system with the technologies of photoelectricity, laser and digital image processing to synthetically measure these two parameters has been developed. A traditional method to measure the swaying quantity and multi-barrel parallelism of rocket launcher is introduced. Meanwhile, the principle, executive plan and the accuracy analysis are also presented. The photoelectric measurement system has been applied in the swaying quantity and multi-barrel parallelism measurement for Φ122 mm and Φ302 mm rocket launcher. The metrical errors are both 16^th.

Improved Correlation for the Volume of Bubble Formed in Air-Water System

In order to address the bubble formation and movement in air-water two-phase flow,single bubble rising in stagnant water is experimentally studied by digital image processing.Bubbles are released individually from the submerged orifices with different diameters(1.81 mm,2.07 mm,2.98 mm,3.92 mm)at different detachment frequency.Images are recorded by a high-speed video camera and processed by digital image processing technique. The factors impacting the formed volume of bubble are discussed.The experimental results showed that a threshold of gas flow rate(400 mm 3 ·s- 1)divides the bubble formation into two regimes:the constant volume regime and the growing volume regime.Especially for the growing volume regime,the surface tension is taken into account.The bubble volume is consisted of two parts:the surface tension impacting part and the gas volume flow rate impacting part.An improved correlation for bubble volume prediction is developed for the two regimes and better coincidence with the experiment data than the previous models is obtained.

Digital Watermark-based Security Technology for Geo-spatial Graphics Data

The paper presents a set of techniques of digital watermarking by which copyright and user rights messages are hidden into geo-spatial graphics data,as well as techniques of compressing and encrypting the watermarked geo-spatial graphics data.The technology aims at tracing and resisting the illegal distribution and duplication of the geo-spatial graphics data product,so as to effectively protect the data producer＇s rights as well as to facilitate the secure sharing of geo-spatial graphics data.So far in the CIS field throughout the world,few researches have been made on digital watermarking.The research is a novel exploration both in the field of security management of geo-spatial graphics data and in the applications of digital watermarking technique.An application software employing the proposed technology has been developed.A number of experimental tests on the 1：500,000 digital bathymetric chart of the South China Sea and 1：10,000 digital topographic map of Jiangsu Province have been conducted to verify the feasibility of the proposed technology.

Digital Image Processing Methods for Bridge Coating Management and Their Limitations

Accurate and objective rust defect assessment is required to maintain good quality steel bridge coating surfaces and make a decision whether a bridge shall completely or partially be repainted. For more objective rust defect recognition, digital image recognition methods have been developed for the past few years and they are expected to replace or complement conventional painting inspection methods. Efficient image processing methods are also essential for the successful implementation of steel bridge coating warranty contracting where the owner, usually a state agency, and the contractor inspect steel bridge coating conditions regularly and decide whether additional maintenance actions are needed based on the processed data. There are two approaches to develop automated rust defect recognition methods： applying a statistical method or an artificial intelligence technique. This paper presents the application of previously developed image processing methods for defect evaluations on a bridge coating surface and discusses their limitations under three environmental conditions which are often encountered while acquiring digital images.