There are five changes in higher education across the world in the 21st century. The five changes include changes in the university students, changes in the professoriate, changes in academic administration, intematio...There are five changes in higher education across the world in the 21st century. The five changes include changes in the university students, changes in the professoriate, changes in academic administration, intemationalisation, and assessment of academic work. These changes are evident in higher education in China. The pressure of the changes -on lecturers will have effects on the wellbeing of lecturers. The study discusses the wellbeing under the Self-determination Theory. This theory views wellbeing as a state of happiness. This theory also proposes that people＇s intrinsic goals like personal growth, meaningful relationships, and community contributions can enhance the satisfaction of three basic needs--need for autonomy, need for competence, and need for relatedness. In this way, lecturers can experience a sense of wellbeing. The findings of the study are significant for leaders in higher education who need to implement policies that foster effective work environments.展开更多
AIM To evaluate the cytological diagnostic capacity and sample quality of the slow-pull technique and compare them with different suction techniques.METHODS From July 2010 to December 2015, 102 patients with pancreati...AIM To evaluate the cytological diagnostic capacity and sample quality of the slow-pull technique and compare them with different suction techniques.METHODS From July 2010 to December 2015, 102 patients with pancreatic solid lesions who underwent endoscopic ultrasound-guided fine-needle aspiration(EUS-FNA) with 22-gauge needles were retrospectively evaluated. EUS-FNA diagnosis was based on a cytological examination, and final diagnosis was based on a comprehensive standard of cytological diagnosis, surgical pathology and clinical or imaging follow-up. Cytological specimens were characterized for cellularity and blood contamination. The cytological diagnostic capacity and sample quality of the slow-pull technique and suction techniques with 5-m L/10-m L/20-m L syringes were analyzed.RESULTS Of all of the EUS-FNA procedures, the slow-pull technique and suction techniques with 5-m L/10-m L/20-m L syringes were used in 31, 19, 34 and 18 procedures, respectively. There were significant differences between these four suction techniques in terms of cytological diagnostic accuracy(90.3% vs 63.2% vs 58.8% vs 55.6%, P = 0.019), sensitivity(88.2% vs 41.7% vs 40.0% vs 36.4%, P = 0.009) and blood contamination(score ≥ 2 for 29.0% vs 52.6% vs 70.6% vs 72.2%, P = 0.003). The accuracy and sensitivity of the slow-pull technique were significantly higher than those of the suction techniques using 5-m L(P = 0.03, P = 0.014), 10-m L(P = 0.005; P = 0.006) and 20-mL syringes(P = 0.01, P = 0.01). Blood contamination was significantly lower in the slow-pull technique than in the suction techniques with 10-m L(P = 0.001) and 20-mL syringes(P = 0.007).CONCLUSION The slow-pull technique may increase the cytological diagnostic accuracy and sensitivity with slight blood contamination during EUS-FNA when using 22-gauge needles for solid pancreatic masses.展开更多
目的探讨三甲医院临退休护士的心理健康状态和心理承受压力来源。方法选取上海市3家大型三甲医院210例临退休护士,采用国内的广泛应用的反应心理健康状态的症状自评量表(symptom check list 90,SCL-90)和《护士工作压力源量表》,统计SCL...目的探讨三甲医院临退休护士的心理健康状态和心理承受压力来源。方法选取上海市3家大型三甲医院210例临退休护士,采用国内的广泛应用的反应心理健康状态的症状自评量表(symptom check list 90,SCL-90)和《护士工作压力源量表》,统计SCL-90躯体化、强迫、抑郁、焦虑、敌对、恐怖、偏执及精神病性等因子的得分及总分,并常模比较,并分析临退休护理人员的压力来源。结果 183名临退休护士的SCL-90各项指标均分均高于常模,躯体化、强迫、抑郁、焦虑、敌对、恐怖及精神病性等因子及总分与常模比较差异有统计学意义(P<0.01);三甲医院临退休护理人员压力来源得分最高的为学术压力大。结论临退休护理人员的心理健康状态存在问题,压力处于中高度压力水平。展开更多
Improvement of aerodynamic performance and reduction of interaction tone noise of a centrifugal compressor with vaned diffusers are discussed by experiments and visualization techniques using a colored off-film method...Improvement of aerodynamic performance and reduction of interaction tone noise of a centrifugal compressor with vaned diffusers are discussed by experiments and visualization techniques using a colored off-film method. The focus of the research is concentrated on the leading edge shape of diffuser vanes that are deeply related to the generation mechanism of the interaction tone noise. The compressor-radiated noise can be reduced by more than ten decibels by using modified diffuser vanes which have 3-D tapered shapes on both pressure and suction sur- faces of the leading edge. Furthermore, by adopting the proposed modified diffuser vanes, the secondary flow which is considered to be an obstruction of diffuser pressure recovery can be suppressed, and also the pressure decrease observed in the throat part of the diffuser flow passage is reducible. Thus, the proposed diffuser vanes show a favorable result for both noise and the aerodynamic performance of the centrifugal compressor, and offer a few basic guidelines for the diffuser vane design.展开更多
Among many equipment for passenger safety, the air bag system is the most fundamental and effective device for an automobile. The inflator housing is a main part of the curtain-type air bag system, which supplies high...Among many equipment for passenger safety, the air bag system is the most fundamental and effective device for an automobile. The inflator housing is a main part of the curtain-type air bag system, which supplies high-pressure gases in pumping up the air bag-curtain which is increasingly being adapted in deluxe cars for protecting passengers from the danger of side clash. However, flow information on the inflator housing is very limited. In this study, we measure the instantaneous velocity fields of a high-speed compressible flow issuing from the exit nozzle of an inflator housing using a dynamic PIV system. From the velocity field data measured at a high frame-rate, we evaluate the variation of the mass flow rate with time. The dynamic PIV system consists of a high-repetition Nd：YLF laser, a high-speed CMOS camera, and a delay generator. The flow images are taken at 4000 fps with synchronization of the trigger signal for inflator ignition. From the instantaneous velocity field data of flow ejecting from the airbag inflator housing at the initial stage, we can see a flow pattern of broken shock wave front and its downward propagation. The flow ejecting from the inflator housing is found to have very high velocity fluctuations, with the maximum velocity at about 700 m/s. The time duration of the high-speed flow is very short, and there is no perceptible flow after 100 ms.展开更多
In Order to reduce the noise in the images and the physical storage, the wavelet-based image compression technique was applied to PIV processing in this paper. To study the effect of the wavelet bases, the standard PI...In Order to reduce the noise in the images and the physical storage, the wavelet-based image compression technique was applied to PIV processing in this paper. To study the effect of the wavelet bases, the standard PIV images were compressed by some known wavelet families, Daubechies, Coifman and Baylkin families with various compression ratios. It was found that a higher order wavelet base provided good compression performance for compressing PIV images. The error analysis of velocity field obtained indicated that the high compression ratio, even up to 64.1, can be realized without losing significant flow information in PIV processing. The wavelet compression technique of PIV was applied to the experimental images of jet flow and showed excellent performance. A reduced number of erroneous vectors can be realized by varying compression ratio. It can say that the wavelet image compression technique is very effective in PIV system.展开更多
In typical small engines, the cooling air for high pressure turbine （HPT） in a gas turbine engine is commonly bled off from the main flow at the tip of the centrifugal impeller. The pressurized air flow is drawn rad...In typical small engines, the cooling air for high pressure turbine （HPT） in a gas turbine engine is commonly bled off from the main flow at the tip of the centrifugal impeller. The pressurized air flow is drawn radially inwards through the impeller rear cavity. The centripetal air flow creates a strong vortex because of high inlet tangential velocity, which results in significant pressure losses. This not only restricts the mass flow rate, but also reduces the cooling air pressure for down-stream hot com- ponents. The present study is devoted to the numerical modeling of flow in an impeller rear cavity. The simulations are can＇ied out with axisymmetric and 3-D sector models for various inlet swirl ratio ,80 （0-0.6）, turbulent flow parameter 2-r （0.028-0,280） with and without baffle. The baffle is a thin plate attached to the stationary wall of the cavity, and is proved to be useful in re- ducing the pressure loss of centripetal flow in the impeller rear cavity in the current paper. Further flow details in impeller rear cavity with and without baffle are displayed using CFD techniques. The CFD results show that for any specified geometry, the outlet pressure coefficient of impeller rear cavity with or without baffle depends only on the inlet swirl ratio and turbulent flow parameter. Meanwhile, the outlet pressure coefficient of the cavity with baffle is indeed smaller than that of cavity without baffle, especially for the cases with high inlet swirl ratio. The suppression of the effect of centrifugal pumping and the mixing beween the main air which is downstream of the baffle and the recirculating flow of the vortex in the stationary cavity, which are caused by the use of baffle, are the underlying reasons that lead to the reduction of outlet pressure loss.展开更多
文摘There are five changes in higher education across the world in the 21st century. The five changes include changes in the university students, changes in the professoriate, changes in academic administration, intemationalisation, and assessment of academic work. These changes are evident in higher education in China. The pressure of the changes -on lecturers will have effects on the wellbeing of lecturers. The study discusses the wellbeing under the Self-determination Theory. This theory views wellbeing as a state of happiness. This theory also proposes that people＇s intrinsic goals like personal growth, meaningful relationships, and community contributions can enhance the satisfaction of three basic needs--need for autonomy, need for competence, and need for relatedness. In this way, lecturers can experience a sense of wellbeing. The findings of the study are significant for leaders in higher education who need to implement policies that foster effective work environments.
文摘AIM To evaluate the cytological diagnostic capacity and sample quality of the slow-pull technique and compare them with different suction techniques.METHODS From July 2010 to December 2015, 102 patients with pancreatic solid lesions who underwent endoscopic ultrasound-guided fine-needle aspiration(EUS-FNA) with 22-gauge needles were retrospectively evaluated. EUS-FNA diagnosis was based on a cytological examination, and final diagnosis was based on a comprehensive standard of cytological diagnosis, surgical pathology and clinical or imaging follow-up. Cytological specimens were characterized for cellularity and blood contamination. The cytological diagnostic capacity and sample quality of the slow-pull technique and suction techniques with 5-m L/10-m L/20-m L syringes were analyzed.RESULTS Of all of the EUS-FNA procedures, the slow-pull technique and suction techniques with 5-m L/10-m L/20-m L syringes were used in 31, 19, 34 and 18 procedures, respectively. There were significant differences between these four suction techniques in terms of cytological diagnostic accuracy(90.3% vs 63.2% vs 58.8% vs 55.6%, P = 0.019), sensitivity(88.2% vs 41.7% vs 40.0% vs 36.4%, P = 0.009) and blood contamination(score ≥ 2 for 29.0% vs 52.6% vs 70.6% vs 72.2%, P = 0.003). The accuracy and sensitivity of the slow-pull technique were significantly higher than those of the suction techniques using 5-m L(P = 0.03, P = 0.014), 10-m L(P = 0.005; P = 0.006) and 20-mL syringes(P = 0.01, P = 0.01). Blood contamination was significantly lower in the slow-pull technique than in the suction techniques with 10-m L(P = 0.001) and 20-mL syringes(P = 0.007).CONCLUSION The slow-pull technique may increase the cytological diagnostic accuracy and sensitivity with slight blood contamination during EUS-FNA when using 22-gauge needles for solid pancreatic masses.
文摘目的探讨三甲医院临退休护士的心理健康状态和心理承受压力来源。方法选取上海市3家大型三甲医院210例临退休护士,采用国内的广泛应用的反应心理健康状态的症状自评量表(symptom check list 90,SCL-90)和《护士工作压力源量表》,统计SCL-90躯体化、强迫、抑郁、焦虑、敌对、恐怖、偏执及精神病性等因子的得分及总分,并常模比较,并分析临退休护理人员的压力来源。结果 183名临退休护士的SCL-90各项指标均分均高于常模,躯体化、强迫、抑郁、焦虑、敌对、恐怖及精神病性等因子及总分与常模比较差异有统计学意义(P<0.01);三甲医院临退休护理人员压力来源得分最高的为学术压力大。结论临退休护理人员的心理健康状态存在问题,压力处于中高度压力水平。
文摘Improvement of aerodynamic performance and reduction of interaction tone noise of a centrifugal compressor with vaned diffusers are discussed by experiments and visualization techniques using a colored off-film method. The focus of the research is concentrated on the leading edge shape of diffuser vanes that are deeply related to the generation mechanism of the interaction tone noise. The compressor-radiated noise can be reduced by more than ten decibels by using modified diffuser vanes which have 3-D tapered shapes on both pressure and suction sur- faces of the leading edge. Furthermore, by adopting the proposed modified diffuser vanes, the secondary flow which is considered to be an obstruction of diffuser pressure recovery can be suppressed, and also the pressure decrease observed in the throat part of the diffuser flow passage is reducible. Thus, the proposed diffuser vanes show a favorable result for both noise and the aerodynamic performance of the centrifugal compressor, and offer a few basic guidelines for the diffuser vane design.
文摘Among many equipment for passenger safety, the air bag system is the most fundamental and effective device for an automobile. The inflator housing is a main part of the curtain-type air bag system, which supplies high-pressure gases in pumping up the air bag-curtain which is increasingly being adapted in deluxe cars for protecting passengers from the danger of side clash. However, flow information on the inflator housing is very limited. In this study, we measure the instantaneous velocity fields of a high-speed compressible flow issuing from the exit nozzle of an inflator housing using a dynamic PIV system. From the velocity field data measured at a high frame-rate, we evaluate the variation of the mass flow rate with time. The dynamic PIV system consists of a high-repetition Nd：YLF laser, a high-speed CMOS camera, and a delay generator. The flow images are taken at 4000 fps with synchronization of the trigger signal for inflator ignition. From the instantaneous velocity field data of flow ejecting from the airbag inflator housing at the initial stage, we can see a flow pattern of broken shock wave front and its downward propagation. The flow ejecting from the inflator housing is found to have very high velocity fluctuations, with the maximum velocity at about 700 m/s. The time duration of the high-speed flow is very short, and there is no perceptible flow after 100 ms.
文摘In Order to reduce the noise in the images and the physical storage, the wavelet-based image compression technique was applied to PIV processing in this paper. To study the effect of the wavelet bases, the standard PIV images were compressed by some known wavelet families, Daubechies, Coifman and Baylkin families with various compression ratios. It was found that a higher order wavelet base provided good compression performance for compressing PIV images. The error analysis of velocity field obtained indicated that the high compression ratio, even up to 64.1, can be realized without losing significant flow information in PIV processing. The wavelet compression technique of PIV was applied to the experimental images of jet flow and showed excellent performance. A reduced number of erroneous vectors can be realized by varying compression ratio. It can say that the wavelet image compression technique is very effective in PIV system.
基金supported by the National Natural Science Foundation of China(Grant No.51306177)
文摘In typical small engines, the cooling air for high pressure turbine （HPT） in a gas turbine engine is commonly bled off from the main flow at the tip of the centrifugal impeller. The pressurized air flow is drawn radially inwards through the impeller rear cavity. The centripetal air flow creates a strong vortex because of high inlet tangential velocity, which results in significant pressure losses. This not only restricts the mass flow rate, but also reduces the cooling air pressure for down-stream hot com- ponents. The present study is devoted to the numerical modeling of flow in an impeller rear cavity. The simulations are can＇ied out with axisymmetric and 3-D sector models for various inlet swirl ratio ,80 （0-0.6）, turbulent flow parameter 2-r （0.028-0,280） with and without baffle. The baffle is a thin plate attached to the stationary wall of the cavity, and is proved to be useful in re- ducing the pressure loss of centripetal flow in the impeller rear cavity in the current paper. Further flow details in impeller rear cavity with and without baffle are displayed using CFD techniques. The CFD results show that for any specified geometry, the outlet pressure coefficient of impeller rear cavity with or without baffle depends only on the inlet swirl ratio and turbulent flow parameter. Meanwhile, the outlet pressure coefficient of the cavity with baffle is indeed smaller than that of cavity without baffle, especially for the cases with high inlet swirl ratio. The suppression of the effect of centrifugal pumping and the mixing beween the main air which is downstream of the baffle and the recirculating flow of the vortex in the stationary cavity, which are caused by the use of baffle, are the underlying reasons that lead to the reduction of outlet pressure loss.
