Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the co...Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O)-n(C) (molar ratio) as 1.00-0.84 and n(SiO2)-n(CaO) as 1.00-0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0-10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio.展开更多
Programs take on changing behavior at nmtime in a simultaneous multithreading （SMT） environment. How reasonably common resources are distributed among the threads significantly determines the throughput and fairness...Programs take on changing behavior at nmtime in a simultaneous multithreading （SMT） environment. How reasonably common resources are distributed among the threads significantly determines the throughput and fairness performance in SMT processors. Existing resource distribution methods either mainly rely on the front-end fetch policy, or make distribution decisions according to the limited information from the pipeline. It is difficult for them to efficiently catch the various resource requirements of the threads. This work presents a spatially triggered dissipative resource distribution （SDRD） policy for SMT processors, its two parts, the self-organization mechanism that is driven by the real-time instructions per cycle （IPC） performance and the introduction of chaos that tries to control the diversity Of trial resource distributions, work together to supply sustaining resource distribution optimization for changing program behavior. Simulation results show that SDRD with fine-grained diversity controlling is more effective than that with a coarse-grained one. And SDRD benefits much from its two well-coordinated parts, providing potential fairness gains as well as good throughput gains. Meanings and settings of important SDRD parameters are also discussed.展开更多
The Ga-Hg binary system was thermodynamically assessed by the CALPHAD method, but only configuration contributions were considered to the entropy of the liquid. The Mg-Hg binary system has not been assessed yet. In th...The Ga-Hg binary system was thermodynamically assessed by the CALPHAD method, but only configuration contributions were considered to the entropy of the liquid. The Mg-Hg binary system has not been assessed yet. In the assessments of the Ga-Hg and Mg-Hg binary systems, solutions including liquid and hcp (Mg) were treated as substitution solutions, of which the excess Gibbs energies were formulated with the Relich-Kister polynomial. The intermetallic phases in the Mg-Hg binary system, Mg3Hg, Mg5Hg2, Mg2Hg, Mg5Hg3, MgHg, and MgHg2, were described as stoichiometric compounds. Based on the reported experimental data and thermodynamic properties of the phase diagram, sets of self-consistent parameters describing all phases in the Ga-Hg and the Mg-Hg binary systems were obtained.展开更多
Serious accidents of mine hoists caused by high-speed sliding between friction lining and wire rope are often seen in coal mines.In order to solve this problem,we analyzed the contact characteristics between friction ...Serious accidents of mine hoists caused by high-speed sliding between friction lining and wire rope are often seen in coal mines.In order to solve this problem,we analyzed the contact characteristics between friction lining and wire rope.Then we carried out a dynamic mechanical analysis(DMA) to explain the change in mechanical properties of the friction lining as function of temperature and load frequency and found that temperature has a stronger effect on the mechanical properties than the frequency.We used multiple regression analysis to obtain the thermoviscoelastic constitutive relations of the friction lining.As well we derived the analytic solution for the thermoviscoelastic contact radius and pressure by combining the theory of viscoelastic contact mechanics with thermoviscoelastic constitutive relations.展开更多
基金Project(50474083) supported by the National Natural Science Foundation of ChinaProject supported by the Baoshan Iron & Steel Co. Ltd. of China
文摘Chromium ore fines containing coal (COFCC) can be rapidly heated by microwave to conduct the voluminal reduction, which lays a foundation of getting sponge ferrochromium powders with a lower content of C. Under the conditions of COFCC with n(O)-n(C) (molar ratio) as 1.00-0.84 and n(SiO2)-n(CaO) as 1.00-0.39, the samples were heated by 10 kW microwave power to reach the given temperatures and held for different times respectively. The results show that the low-C-Cr ferrochromium metal phase in the reduced materials forms before the high-C-Cr ferrochromium metal phase does. With increasing temperature the C content of ferrochromium metals is in a positive correlation with the content of Cr. The C content of ferrochromium metal in reduced materials is 0-10.07% with an average value of 4.68%. With the increase of holding time the Cr content in ferrochromium metals is in a negative correlation with the content of C, while the content of Fe changes in the contrary way. In the microwave field the kinetic conditions of carburization are closely related with the temperature of microwave heating, holding time and carbon fitting ratio.
基金the Hi-Tech Research and Development Pro-gram (863) of China (No. 2006AA01Z431) the Key Science andTechnology Program of Zhejiang Province (Nos. 2007C11068 and2007C11088), China
文摘Programs take on changing behavior at nmtime in a simultaneous multithreading （SMT） environment. How reasonably common resources are distributed among the threads significantly determines the throughput and fairness performance in SMT processors. Existing resource distribution methods either mainly rely on the front-end fetch policy, or make distribution decisions according to the limited information from the pipeline. It is difficult for them to efficiently catch the various resource requirements of the threads. This work presents a spatially triggered dissipative resource distribution （SDRD） policy for SMT processors, its two parts, the self-organization mechanism that is driven by the real-time instructions per cycle （IPC） performance and the introduction of chaos that tries to control the diversity Of trial resource distributions, work together to supply sustaining resource distribution optimization for changing program behavior. Simulation results show that SDRD with fine-grained diversity controlling is more effective than that with a coarse-grained one. And SDRD benefits much from its two well-coordinated parts, providing potential fairness gains as well as good throughput gains. Meanings and settings of important SDRD parameters are also discussed.
文摘The Ga-Hg binary system was thermodynamically assessed by the CALPHAD method, but only configuration contributions were considered to the entropy of the liquid. The Mg-Hg binary system has not been assessed yet. In the assessments of the Ga-Hg and Mg-Hg binary systems, solutions including liquid and hcp (Mg) were treated as substitution solutions, of which the excess Gibbs energies were formulated with the Relich-Kister polynomial. The intermetallic phases in the Mg-Hg binary system, Mg3Hg, Mg5Hg2, Mg2Hg, Mg5Hg3, MgHg, and MgHg2, were described as stoichiometric compounds. Based on the reported experimental data and thermodynamic properties of the phase diagram, sets of self-consistent parameters describing all phases in the Ga-Hg and the Mg-Hg binary systems were obtained.
基金Projects 50875253 supported by the National Natural Science Foundation of China20060290505 by the Research Fund for the Doctoral Program of Higher Education of China+2 种基金107054 by the Key Project of Ministry of Education of ChinaBK2008127 by the Natural Science Foundation of Jiangsu ProvinceCX08B_042Z by the Scientific Innovation Program for Postgraduates in Colleges and Universities of Jiangsu Province
文摘Serious accidents of mine hoists caused by high-speed sliding between friction lining and wire rope are often seen in coal mines.In order to solve this problem,we analyzed the contact characteristics between friction lining and wire rope.Then we carried out a dynamic mechanical analysis(DMA) to explain the change in mechanical properties of the friction lining as function of temperature and load frequency and found that temperature has a stronger effect on the mechanical properties than the frequency.We used multiple regression analysis to obtain the thermoviscoelastic constitutive relations of the friction lining.As well we derived the analytic solution for the thermoviscoelastic contact radius and pressure by combining the theory of viscoelastic contact mechanics with thermoviscoelastic constitutive relations.
