Nowadays global navigation satellite system(GNSS)receivers are the primary tool not only for precision surveying but also for geodesy,geophysics and many other industrial applications worldwide.The only way to assure ...Nowadays global navigation satellite system(GNSS)receivers are the primary tool not only for precision surveying but also for geodesy,geophysics and many other industrial applications worldwide.The only way to assure the accuracy,universality and longevity of GNSS measurements is by calibration of its receivers.The parameters affecting the calibration accuracy of a single GNSS receiver are discussed in this paper.And a geodetic basepoint is established according to previous empirical studies to serve as a reference for calibration.Additionally,the traceability to the systeme international(SI)unit of such kind of calibrations is discussed.Stability of the base point is also verified through long-term measurements over three years.Eventually,a calibration of a sample single GNSS receiver is performed and the uncertainty budget is derived.展开更多
In this paper, it is attempted to examine and compare different orientation, one recreational and another more precise, in the performance of two （global positioning system） receivers of forested areas. In doing thi...In this paper, it is attempted to examine and compare different orientation, one recreational and another more precise, in the performance of two （global positioning system） receivers of forested areas. In doing this, a field test on horizontal and vertical positional errors of GPS positioning at different points in the forested area of Taxiarchis-Vrastama University forest was conducted. The two GPS receivers were used to determine the positional accuracy of a selected number of points under tree canopies. Specifically, the precision and accuracy of Garmin＇s GPS positioning at different points were calculated and compared with the corresponding positioning and accuracy of another GPS system, namely the TOPCON GPS. By the calculation of various measures of accuracy and precision suitable for GPS receivers and the use of statistical methods, accuracy between the different receivers differed significantly is shown. Also, regression analysis revealed that the basal area and the number of available satellites are the most important factors for predicting position error.展开更多
Because the signals of global positioning system （GPS） satellites are susceptible to obstructions in urban environment with many high buildings around, the number of GPS useful satellites is usually less than six. I...Because the signals of global positioning system （GPS） satellites are susceptible to obstructions in urban environment with many high buildings around, the number of GPS useful satellites is usually less than six. In this case, the receiver autonomous integrity monitoring （RAIM） method earmot exclude faulty satellite. In order to improve the performance of RAIM method and obtain the reliable positioning results with five satellites, the series of receiver clock bias （RCB） is regarded as one useful satellite and used to aid RAIM method. From the point of nonlinear series, a grey-Markov model for predicting the RCB series based on grey theory and Markov chain is presented. And then the model is used for aiding RAIM method in order to exclude faulty satellite. Experimental results demonstrate that the prediction model is fit for predicting the RCB series, and with the clock-based RAIM method the faulty satellite can be correctly excluded and the positioning precision of GPS receiver can be improved for the case where there are only five useful satellites.展开更多
The development of GPS （global positioning system） receiver now can be integrated on a smartphone. GPS receiver on smartphones has been developed for location-based applications. Smartphones are very suitable to be ...The development of GPS （global positioning system） receiver now can be integrated on a smartphone. GPS receiver on smartphones has been developed for location-based applications. Smartphones are very suitable to be used as an experimental tool, because smartphones are usually equipped with various types of sensors. This paper proposes a model observation vehicle speed on a road section based on the GPS data on the smartphone. Observations made by calculating the speed of the speed of vehicles moving through the data transfer at the GPS location of the smartphone, the data are then sent periodically to the server and server processing and storage of vehicle speed data. After tested with test reliability indicators use RMSE, observations with model observations speed, speed based on GPS data on a smartphone are relevant when compared with the speed directly from the vehicle＇s speedometer with the difference between the value of the difference of speed that is 3.1785 km/h.展开更多
文摘Nowadays global navigation satellite system(GNSS)receivers are the primary tool not only for precision surveying but also for geodesy,geophysics and many other industrial applications worldwide.The only way to assure the accuracy,universality and longevity of GNSS measurements is by calibration of its receivers.The parameters affecting the calibration accuracy of a single GNSS receiver are discussed in this paper.And a geodetic basepoint is established according to previous empirical studies to serve as a reference for calibration.Additionally,the traceability to the systeme international(SI)unit of such kind of calibrations is discussed.Stability of the base point is also verified through long-term measurements over three years.Eventually,a calibration of a sample single GNSS receiver is performed and the uncertainty budget is derived.
文摘In this paper, it is attempted to examine and compare different orientation, one recreational and another more precise, in the performance of two （global positioning system） receivers of forested areas. In doing this, a field test on horizontal and vertical positional errors of GPS positioning at different points in the forested area of Taxiarchis-Vrastama University forest was conducted. The two GPS receivers were used to determine the positional accuracy of a selected number of points under tree canopies. Specifically, the precision and accuracy of Garmin＇s GPS positioning at different points were calculated and compared with the corresponding positioning and accuracy of another GPS system, namely the TOPCON GPS. By the calculation of various measures of accuracy and precision suitable for GPS receivers and the use of statistical methods, accuracy between the different receivers differed significantly is shown. Also, regression analysis revealed that the basal area and the number of available satellites are the most important factors for predicting position error.
基金Project(20090580013) supported by the Aeronautic Science Foundation of ChinaProject(ZYGX2010J119) supported by the Fundamental Research Funds for the Central Universities,China
文摘Because the signals of global positioning system （GPS） satellites are susceptible to obstructions in urban environment with many high buildings around, the number of GPS useful satellites is usually less than six. In this case, the receiver autonomous integrity monitoring （RAIM） method earmot exclude faulty satellite. In order to improve the performance of RAIM method and obtain the reliable positioning results with five satellites, the series of receiver clock bias （RCB） is regarded as one useful satellite and used to aid RAIM method. From the point of nonlinear series, a grey-Markov model for predicting the RCB series based on grey theory and Markov chain is presented. And then the model is used for aiding RAIM method in order to exclude faulty satellite. Experimental results demonstrate that the prediction model is fit for predicting the RCB series, and with the clock-based RAIM method the faulty satellite can be correctly excluded and the positioning precision of GPS receiver can be improved for the case where there are only five useful satellites.
文摘The development of GPS （global positioning system） receiver now can be integrated on a smartphone. GPS receiver on smartphones has been developed for location-based applications. Smartphones are very suitable to be used as an experimental tool, because smartphones are usually equipped with various types of sensors. This paper proposes a model observation vehicle speed on a road section based on the GPS data on the smartphone. Observations made by calculating the speed of the speed of vehicles moving through the data transfer at the GPS location of the smartphone, the data are then sent periodically to the server and server processing and storage of vehicle speed data. After tested with test reliability indicators use RMSE, observations with model observations speed, speed based on GPS data on a smartphone are relevant when compared with the speed directly from the vehicle＇s speedometer with the difference between the value of the difference of speed that is 3.1785 km/h.
