The tunnel subjected to strike-slip fault dislocation exhibits severe and catastrophic damage.The existing analysis models frequently assume uniform fault displacement and fixed fault plane position.In contrast,post-e...The tunnel subjected to strike-slip fault dislocation exhibits severe and catastrophic damage.The existing analysis models frequently assume uniform fault displacement and fixed fault plane position.In contrast,post-earthquake observations indicate that the displacement near the fault zone is typically nonuniform,and the fault plane position is uncertain.In this study,we first established a series of improved governing equations to analyze the mechanical response of tunnels under strike-slip fault dislocation.The proposed methodology incorporated key factors such as nonuniform fault displacement and uncertain fault plane position into the governing equations,thereby significantly enhancing the applicability range and accuracy of the model.In contrast to previous analytical models,the maximum computational error has decreased from 57.1%to 1.1%.Subsequently,we conducted a rigorous validation of the proposed methodology by undertaking a comparative analysis with a 3D finite element numerical model,and the results from both approaches exhibited a high degree of qualitative and quantitative agreement with a maximum error of 9.9%.Finally,the proposed methodology was utilized to perform a parametric analysis to explore the effects of various parameters,such as fault displacement,fault zone width,fault zone strength,the ratio of maximum fault displacement of the hanging wall to the footwall,and fault plane position,on the response of tunnels subjected to strike-slip fault dislocation.The findings indicate a progressive increase in the peak internal forces of the tunnel with the rise in fault displacement and fault zone strength.Conversely,an augmentation in fault zone width is found to contribute to a decrease in the peak internal forces.For example,for a fault zone width of 10 m,the peak values of bending moment,shear force,and axial force are approximately 46.9%,102.4%,and 28.7% higher,respectively,compared to those observed for a fault zone width of 50 m.Furthermore,the position of the peak internal forces is influenced by variations in the ratio of maximum fault displacement of the hanging wall to footwall and the fault plane location,while the peak values of shear force and axial force always align with the fault plane.The maximum peak internal forces are observed when the footwall exclusively bears the entirety of the fault displacement,corresponding to a ratio of 0:1.The peak values of bending moment,shear force,and axial force for the ratio of 0:1 amount to approximately 123.8%,148.6%,and 111.1% of those for the ratio of 0.5:0.5,respectively.展开更多
For microseisimic monitoring it is difficult to determine wave modes and their propagation velocity. In this paper, we propose a new method for automatically inverting in real time the source characteristics of micros...For microseisimic monitoring it is difficult to determine wave modes and their propagation velocity. In this paper, we propose a new method for automatically inverting in real time the source characteristics of microseismic events in mine engineering without wave mode identification and velocities. Based on the wave equation in a spherical coordinate system, we derive a tomographic imaging equation and formulate a scanning parameter selection criterion by which the microseisimic event maximum energy and corresponding parameters can be determined. By determining the maximum energy positions inside a given risk district, we can indentify microseismic events inside or outside the risk districts. The synthetic and field examples demonstrate that the proposed tomographic imaging method can automatically position microseismic events by only knowing the risk district dimensions and range of velocities without identifying the wavefield modes and accurate velocities. Therefore, the new method utilizes the full wavefields to automatically monitor microseismic events.展开更多
BP neural network is introduced to the fault location field of DWDM optical network in this paper. The alarm characteris-tics of the optical network equipments are discussed,and alarm vector and fault vector diagrams ...BP neural network is introduced to the fault location field of DWDM optical network in this paper. The alarm characteris-tics of the optical network equipments are discussed,and alarm vector and fault vector diagrams are generated by analyzing some typical instances. A 17×14×18 BP neural network structure is constructed and trained by using MATLAB. By comparing the training performances,the best training algorithm of fault location among the three training algorithms is chosen. Numerical simulation results indicate that the sum squared error (SSE) of fault location is less than 0.01,and the processing time is less than 100 ms. This method not only well deals with the missing alarms or false alarms,but also improves the fault location accuracy and real-time ability.展开更多
We calculated the crustal stress field using the composite focal mechanism method based on the P-wave initial motion polarity data of the Tengchong volcanic area from January 2011 to April 2019 obtained from the Bulle...We calculated the crustal stress field using the composite focal mechanism method based on the P-wave initial motion polarity data of the Tengchong volcanic area from January 2011 to April 2019 obtained from the Bulletin of Seismological Observations of Chinese stations.The magnitude range of earthquakes used in this study is 0–4,and their magnitudes are mainly approximately 1.0.To investigate the infl uence of the source location on the stress fi eld and obtain reliable stress fi elds of the study area,we applied the double-diff erence algorithm to relocate the seismic events,obtaining more accurate and reliable relative positions of seismic events with a clearer seismic belt.On the basis of relocation results,the study on the stress fi eld along the fault zone was conducted,and the infl uence of seismic event position on the stress fi eld was analyzed.Results show that,fi rst,the current stress regime in the shallow crust of the Tengchong volcanic area is strike-slip faulting,the orientation of the principal compressive stress axis is NE–SW,the orientation of the principal extension stress axis is SE–NW,the principal compressive and extension stress axes are nearly horizontal,and the dip angle of intermediate principal stress axis is relatively large.This reflects that the volcanic and seismic activities in the Tengchong volcanic area are mainly controlled by the collision and squeezing eff ect of the Indian–Eurasian plate.It also refl ects that the current tensile action caused by deep magma activity has little infl uence on the shallow crustal stress field.Second,the stress field along fault zones reveals that there exist local stress fi elds,such as the thrust stress regime at the strike-slip fault terminal area,which is consistent with the compressional area at the intersection of conjugate strike-slip faults indicated by previous study.Third,the stress fi eld results are consistent,regardless of using the original location in the bulletin or the relocated location,indicating that the infl uence of the event location error can be neglected when there are suffi cient data and refl ecting the stability of the composite focal mechanism method.The findings can serve as a reference for investigating geological structure movement,seismic activities,and volcanic activities in the Tengchong volcanic area.展开更多
To better understand the mechanism of the Mw6.3 L＇Aquila （Central Italy） earthquake occurred in 2009, global positioning system （GPS） and interferometric synthetic aperture radar （InSAR） data were used to deriv...To better understand the mechanism of the Mw6.3 L＇Aquila （Central Italy） earthquake occurred in 2009, global positioning system （GPS） and interferometric synthetic aperture radar （InSAR） data were used to derive the coseismic slip distribution of the earthquake fault. Firstly, based on the homogeneous elastic half-space model, the fault geometric parameters were solved by the genetic algorithm. The best fitting model shows that the fault is a 13.7 km×14.1 km rectangular fault, in 139.3° strike direction and 50.2° southwest-dipping. Secondly, fixing the optimal fault geometric parameters, the fault plane was extended and discretized into 16× 16 patches, each with a size of 1 kmx 1 krn, and the non-uniform slip distribution of the fault was inverted by the steepest descent method with an appropriate smoothing ratio based on the layered crustal structure model. The preferred solution shows that the fault is mainly a normal fault with slight right-lateral strike slip, the maximum slip of 1.01 m is located in the depth of 8.28 km, the average rake is -100.9°, and the total geodetic moment is about 3.34× 1018 N.m （Mw 6.28）. The results are much closer than previous studies in comparison with the seismological estimation. These demonstrate that the coseismic fault slip distribution of the L＇Aauila earthauake inverted by the crustal model considering layered characters is reliable.展开更多
The Longmenshan fault is a thrust fault which runs along the base of the Longmen Mountains in Siehuan province, southwestern China. The southern segment of the fault had two distinct responses to the Ms 8 Wenehuan and...The Longmenshan fault is a thrust fault which runs along the base of the Longmen Mountains in Siehuan province, southwestern China. The southern segment of the fault had two distinct responses to the Ms 8 Wenehuan and Ms 7 Lushan earthquakes. This study determines characteristics of the structural geology of the Longmenshan fault to evaluate how it influenced the two aforementioned earthquakes. This research was done within a Geo- information Technologies （GiT） environment based on multi-source remote sensing and crustal movement data extracted from the Global Positioning System （GPS）. The spatial distribution of the southern segment of the Longmenshan fault zone was comprehensively analyzed to study both earthquakes. The study revealed that the Wenehuan and Lushan earthquakes occurred on two relatively independent faults. In addition, there was a nearly constant-velocity crustal movement zone between the two epicenters that probably had a compressive stress with slow motion. Furthermore, the central fault and a mountain back fault gradually merged from north to south. The Lushan earthquake of the Wenchuan earthquake. was not an affershock The research showed that fault zones within 30-50 km of State Highway 318 are intensive and complex. In addition, crustal movement velocity decreased rapidly, with a strong multi-directional shear zone. Thus, activity in that zone was likely stronger than in the northern part over the medium to long term.展开更多
基金Projects(52378411,52208404)supported by the National Natural Science Foundation of China。
文摘The tunnel subjected to strike-slip fault dislocation exhibits severe and catastrophic damage.The existing analysis models frequently assume uniform fault displacement and fixed fault plane position.In contrast,post-earthquake observations indicate that the displacement near the fault zone is typically nonuniform,and the fault plane position is uncertain.In this study,we first established a series of improved governing equations to analyze the mechanical response of tunnels under strike-slip fault dislocation.The proposed methodology incorporated key factors such as nonuniform fault displacement and uncertain fault plane position into the governing equations,thereby significantly enhancing the applicability range and accuracy of the model.In contrast to previous analytical models,the maximum computational error has decreased from 57.1%to 1.1%.Subsequently,we conducted a rigorous validation of the proposed methodology by undertaking a comparative analysis with a 3D finite element numerical model,and the results from both approaches exhibited a high degree of qualitative and quantitative agreement with a maximum error of 9.9%.Finally,the proposed methodology was utilized to perform a parametric analysis to explore the effects of various parameters,such as fault displacement,fault zone width,fault zone strength,the ratio of maximum fault displacement of the hanging wall to the footwall,and fault plane position,on the response of tunnels subjected to strike-slip fault dislocation.The findings indicate a progressive increase in the peak internal forces of the tunnel with the rise in fault displacement and fault zone strength.Conversely,an augmentation in fault zone width is found to contribute to a decrease in the peak internal forces.For example,for a fault zone width of 10 m,the peak values of bending moment,shear force,and axial force are approximately 46.9%,102.4%,and 28.7% higher,respectively,compared to those observed for a fault zone width of 50 m.Furthermore,the position of the peak internal forces is influenced by variations in the ratio of maximum fault displacement of the hanging wall to footwall and the fault plane location,while the peak values of shear force and axial force always align with the fault plane.The maximum peak internal forces are observed when the footwall exclusively bears the entirety of the fault displacement,corresponding to a ratio of 0:1.The peak values of bending moment,shear force,and axial force for the ratio of 0:1 amount to approximately 123.8%,148.6%,and 111.1% of those for the ratio of 0.5:0.5,respectively.
基金support jointly by projects of the National Natural Science Fund Project (40674017 and 50774012)the National Key Basic Research and Development Plan 973 (2010CB226803)
文摘For microseisimic monitoring it is difficult to determine wave modes and their propagation velocity. In this paper, we propose a new method for automatically inverting in real time the source characteristics of microseismic events in mine engineering without wave mode identification and velocities. Based on the wave equation in a spherical coordinate system, we derive a tomographic imaging equation and formulate a scanning parameter selection criterion by which the microseisimic event maximum energy and corresponding parameters can be determined. By determining the maximum energy positions inside a given risk district, we can indentify microseismic events inside or outside the risk districts. The synthetic and field examples demonstrate that the proposed tomographic imaging method can automatically position microseismic events by only knowing the risk district dimensions and range of velocities without identifying the wavefield modes and accurate velocities. Therefore, the new method utilizes the full wavefields to automatically monitor microseismic events.
文摘BP neural network is introduced to the fault location field of DWDM optical network in this paper. The alarm characteris-tics of the optical network equipments are discussed,and alarm vector and fault vector diagrams are generated by analyzing some typical instances. A 17×14×18 BP neural network structure is constructed and trained by using MATLAB. By comparing the training performances,the best training algorithm of fault location among the three training algorithms is chosen. Numerical simulation results indicate that the sum squared error (SSE) of fault location is less than 0.01,and the processing time is less than 100 ms. This method not only well deals with the missing alarms or false alarms,but also improves the fault location accuracy and real-time ability.
基金the National Scholarship Fundthe National Natural Science Foundation of China(Nos.41704053,42174074,41674055)the East China University of Technology Research Foundation for Advanced Talents(ECUT)(DHBK2019084)for financial support。
文摘We calculated the crustal stress field using the composite focal mechanism method based on the P-wave initial motion polarity data of the Tengchong volcanic area from January 2011 to April 2019 obtained from the Bulletin of Seismological Observations of Chinese stations.The magnitude range of earthquakes used in this study is 0–4,and their magnitudes are mainly approximately 1.0.To investigate the infl uence of the source location on the stress fi eld and obtain reliable stress fi elds of the study area,we applied the double-diff erence algorithm to relocate the seismic events,obtaining more accurate and reliable relative positions of seismic events with a clearer seismic belt.On the basis of relocation results,the study on the stress fi eld along the fault zone was conducted,and the infl uence of seismic event position on the stress fi eld was analyzed.Results show that,fi rst,the current stress regime in the shallow crust of the Tengchong volcanic area is strike-slip faulting,the orientation of the principal compressive stress axis is NE–SW,the orientation of the principal extension stress axis is SE–NW,the principal compressive and extension stress axes are nearly horizontal,and the dip angle of intermediate principal stress axis is relatively large.This reflects that the volcanic and seismic activities in the Tengchong volcanic area are mainly controlled by the collision and squeezing eff ect of the Indian–Eurasian plate.It also refl ects that the current tensile action caused by deep magma activity has little infl uence on the shallow crustal stress field.Second,the stress field along fault zones reveals that there exist local stress fi elds,such as the thrust stress regime at the strike-slip fault terminal area,which is consistent with the compressional area at the intersection of conjugate strike-slip faults indicated by previous study.Third,the stress fi eld results are consistent,regardless of using the original location in the bulletin or the relocated location,indicating that the infl uence of the event location error can be neglected when there are suffi cient data and refl ecting the stability of the composite focal mechanism method.The findings can serve as a reference for investigating geological structure movement,seismic activities,and volcanic activities in the Tengchong volcanic area.
基金Projects(40974006,40774003) supported by the National Natural Science Foundation of ChinaProject(NCET-08-0570) supported by the Program for New Century Excellent Talents in Chinese Universities+2 种基金Projects(2011JQ001,2009QZZD004) supported by the Fundamental Research Funds for the Central Universities in ChinaProjects(09K005,09K006) supported by the Key Laboratory for Precise Engineering Surveying & Hazard Monitoring of Hunan Province,ChinaProject(1343-74334000023) supported by the Graduate DegreeThesis Innovation Foundation of Central South University,China
文摘To better understand the mechanism of the Mw6.3 L＇Aquila （Central Italy） earthquake occurred in 2009, global positioning system （GPS） and interferometric synthetic aperture radar （InSAR） data were used to derive the coseismic slip distribution of the earthquake fault. Firstly, based on the homogeneous elastic half-space model, the fault geometric parameters were solved by the genetic algorithm. The best fitting model shows that the fault is a 13.7 km×14.1 km rectangular fault, in 139.3° strike direction and 50.2° southwest-dipping. Secondly, fixing the optimal fault geometric parameters, the fault plane was extended and discretized into 16× 16 patches, each with a size of 1 kmx 1 krn, and the non-uniform slip distribution of the fault was inverted by the steepest descent method with an appropriate smoothing ratio based on the layered crustal structure model. The preferred solution shows that the fault is mainly a normal fault with slight right-lateral strike slip, the maximum slip of 1.01 m is located in the depth of 8.28 km, the average rake is -100.9°, and the total geodetic moment is about 3.34× 1018 N.m （Mw 6.28）. The results are much closer than previous studies in comparison with the seismological estimation. These demonstrate that the coseismic fault slip distribution of the L＇Aauila earthauake inverted by the crustal model considering layered characters is reliable.
基金funded by the National Natural Science Foundation of China(Grant No.41001253)Chinese Postdoctoral Science Foundation(Grant No.2012M521717)National Science and Technology Major Project(Grant No.03-Y30B069001-13/15)
文摘The Longmenshan fault is a thrust fault which runs along the base of the Longmen Mountains in Siehuan province, southwestern China. The southern segment of the fault had two distinct responses to the Ms 8 Wenehuan and Ms 7 Lushan earthquakes. This study determines characteristics of the structural geology of the Longmenshan fault to evaluate how it influenced the two aforementioned earthquakes. This research was done within a Geo- information Technologies （GiT） environment based on multi-source remote sensing and crustal movement data extracted from the Global Positioning System （GPS）. The spatial distribution of the southern segment of the Longmenshan fault zone was comprehensively analyzed to study both earthquakes. The study revealed that the Wenehuan and Lushan earthquakes occurred on two relatively independent faults. In addition, there was a nearly constant-velocity crustal movement zone between the two epicenters that probably had a compressive stress with slow motion. Furthermore, the central fault and a mountain back fault gradually merged from north to south. The Lushan earthquake of the Wenchuan earthquake. was not an affershock The research showed that fault zones within 30-50 km of State Highway 318 are intensive and complex. In addition, crustal movement velocity decreased rapidly, with a strong multi-directional shear zone. Thus, activity in that zone was likely stronger than in the northern part over the medium to long term.
