定子叶片数对泵喷推进器空化性能的影响

目的在改善泵喷推进器(泵喷)水动力性能的同时,兼顾其空化性能。方法以某前置泵喷为原型,采用基于密度修正的RNG k-ε双方程湍流模型,结合Zwart空化方程,数值研究定子叶片数(N_(s)=6~10)对空化性能的影响。结果泵喷空化主要为叶梢涡空化和叶片表面的片状空化,而时-频空化曲线与叶片数目有关,其中单转子表面空化与定子数目相关,而总空化面积与转-定子影响有关。结论增加定子叶片数虽然提高了泵喷推力和扭矩,但转子叶片及叶梢负荷增加,使空化范围大幅度增加。最终N_(s)从6增加到10时,总空化体积涨幅超过5倍。分析空化流动中的涡量输运方程发现,膨胀收缩项在空化演化占主导作用,并且随着定子叶数的增加而增大。

Numerical Investigation of Influence of Rotor/Stator Interaction on Blade Boundary Layer Flow in a Low Speed Compressor

Numerical method was applied to the unsteady flow simulation at the mid span of a two-stage low speed compressor,and the blade boundary layer flow under rotor/stator interaction was investigated.By the model of wake/boundary layer interaction provided in this paper,the simulated blade frictional force and the boundary layer turbulent kinetic energy,the influence of wake/potential flow interaction on the blade boundary layer flow was analyzed in detail.The results show that under the condition of rotor/stator interaction,the wake is able to induce the stator laminar boundary layer flow to develop into turbulent flow within a certain range of wake interaction.In the stator suction boundary layer,an undisturbed region occurs behind the rotor wake,which extends the laminar flow range,and the wake with high turbulent intensity has the capability to control the boundary layer separation under adverse pressure gradient.