Based on the physical layer standard of cdma2000, the performance analysis of fixed point simulations is presented in this paper on cdma2000 1x downlink. The effects of quantization and finite wordlength, which have...Based on the physical layer standard of cdma2000, the performance analysis of fixed point simulations is presented in this paper on cdma2000 1x downlink. The effects of quantization and finite wordlength, which have typically been assumed negligible in floating point simulations, become significant for fixed point simulations. The complete fixed point simulation platform for cdma2000 1x downlink is developed by EDA tool - COSSAP. The structure and performance of the key component in cdma2000 systems, the RAKE receiver, are discussed in details. Comparisons of results between floating point and fixed point simulations lead to some important conclusions, which provide certain references for the implementation of practical systems.展开更多
To obtain higher accurate position estimates, the stochastic model is estimated by using residual of observations, hence, the stochastic model describes the noise and bias in measurements more realistically. By using ...To obtain higher accurate position estimates, the stochastic model is estimated by using residual of observations, hence, the stochastic model describes the noise and bias in measurements more realistically. By using GPS data and broadcast ephemeris, the numerical results indicating the accurate position estimates at sub-meter level are obtainable.展开更多
A new position group contribution model is proposed for the estimation of normal boiling data of organic compounds involving a carbon chain from C2 to C18.The characteristic of this method is the use of position distr...A new position group contribution model is proposed for the estimation of normal boiling data of organic compounds involving a carbon chain from C2 to C18.The characteristic of this method is the use of position distribution function.It could distinguish most of isomers that include cis-or trans-structure from organic compounds.Contributions for hydrocarbons and hydrocarbon derivatives containing oxygen,nitrogen,chlorine,bromine and sulfur,are given.Compared with the predictions,results made use of the most common existing group contribution methods,the overall average absolute difference of boiling point predictions of 417 organic compounds is 4.2 K;and the average absolute percent derivation is 1.0%,which is compared with 12.3 K and 3.2% with the method of Joback,12.1 K and 3.1% with the method of Constantinou-Gani.This new position contribution groups method is not only much more accurate but also has the advantages of simplicity and stability.展开更多
In view of the relative positioning problem between non-regular quadrilateral grids and regular rectangle grid nodes in the wave front construction method, concrete realization problems with four grid positioning meth...In view of the relative positioning problem between non-regular quadrilateral grids and regular rectangle grid nodes in the wave front construction method, concrete realization problems with four grid positioning methods （vector cross product judgment, angle sum, intersection-point, and signs comparison algorithms） in wave front construction which are commonly used in computer graphics are compared and analyzed in this paper. Based on the stability analysis of the location method, the calculation examples show that the vector cross product judgment method is faster and more accurate than other methods in the realization of the relative positioning between non-regular quadrilateral grids and regular rectangle grid nodes in wave front construction. It provides precise grid point attribute values for the next steps of migration and demigration.展开更多
This paper studies existence and uniqueness for random impulsive differential equations.The authors first generalize a random fixed point theorem of Schaefer's type.Then the authors shall rely on the generalized S...This paper studies existence and uniqueness for random impulsive differential equations.The authors first generalize a random fixed point theorem of Schaefer's type.Then the authors shall rely on the generalized Schaefer's type random fixed point theorem to discuss the existence of the system.In addition,the authors study the existence and uniqueness of random impulsive differential equations by applying random Banach fixed point theorem and obtain some less conservative results.Finally,an example is given to illustrate the effectiveness of the results.展开更多
Wet oxidation procedure,i.e.,Walkley-Black (WB) method,is a routine,relatively accurate,and popular method for the determination of soil organic matter (SOM) but it is time-consuming,costly and also has a high potenti...Wet oxidation procedure,i.e.,Walkley-Black (WB) method,is a routine,relatively accurate,and popular method for the determination of soil organic matter (SOM) but it is time-consuming,costly and also has a high potential to cause environmental pollution because of disposal of chromium and strong acids used in this analysis.Therefore,loss-on-ignition (LOI) procedure,a simple and cheap method for SOM estimation,which also avoids chromic acid wastes,deserves more attention.The aims of this research were to study the statistical relationships between SOM determined with the LOI (SOMLOI) and WB (SOMWB) methods to compare the spatial variability of SOM in two major plains,Shahrekord and Koohrang plains,of Chaharmahal-va-Bakhtiari Province,Iran.Fifty surface soil samples (0-25 cm) were randomly collected in each plain to determine SOM using the WB method and the LOI procedure at 300,360,400,500 and 550 ℃ for 2 h.The samples covered wide ranges of soil texture and calcium carbonate equivalent (CCE).The general linear form of the regression equation was calculated to estimate SOM LOI from SOM obtained by the WB method for both overall samples and individual plains.Forty soil samples were also randomly selected to compare the SOM and CCE before and after ignition at each temperature.Overall accuracy of the continuous maps generated for the LOI and WB methods was considered to determine the accordance of two procedures.Results showed a significant positive linear relationship between SOM LOI and SOM WB.Coefficients of determination (R2) of the equations for individual plains were higher than that of the overall equation.Coefficients of determination and line slopes decreased and root mean square error (RMSE) increased with increasing ignition temperature,which may be due to the mineral structural water loss and destruction of carbonates at higher temperatures.A temperature around 360 ℃ was identified as optimum as it burnt most organic carbon,destroyed less inorganic carbon,caused less clay structural water loss,and used less electrical energy.Although the trends of SOM in the kriged maps by the two procedures accorded well,low overall accuracy was observed for the maps obtained by the two methods.While not suitable for determination where high accuracy is required,determination of organic carbon through LOI is likely suitable for exploratory soil surveys where rough estimation of organic matter is required.展开更多
There is a need for determinations of soil organic carbon (SOC) and inorganic carbon (SIC) due to increasing interest in soil carbon sequestration. Two sets of soil samples were collected separately from the Yanqi Bas...There is a need for determinations of soil organic carbon (SOC) and inorganic carbon (SIC) due to increasing interest in soil carbon sequestration. Two sets of soil samples were collected separately from the Yanqi Basin of northwest China to evaluate loss-on-ignition (LOI) method for estimating SOC and SIC in arid soils through determining SOC using an element analyzer, a modified Walkley-Black method and a LOI method with combustion at 375℃ for 17 h and determining SIC using a pressure calcimeter method and a LOI procedure estimated by a weight loss between 375 to 800℃. Our results indicated that the Walkley-Black method provided 99%recovery of SOC for the arid soils tested. There were strong linear relationships(r > 0.93, P < 0.001) for both SOC and SIC between the traditional method and the LOI technique. One set of soil samples was used to develop relationships between LOI and SOC(by the Walkley-Black method), and between LOI and SIC(by the pressure calcimeter method), and the other set of soil samples was used to evaluate the derived equations by comparing predicted SOC and SIC with measured values. The mean absolute errors were small for both SOC (1.7 g C kg-1) and SIC(1.22 g C kg-1), demonstrating that the LOI method was reliable and could provide accurate estimates of SOC and SIC for arid soils.展开更多
For technological reasons many high-performance solid rocket motors are made from segmented propellant grains with non-uniform port geometry. In this paper parametric studies have been carried out to examine the geome...For technological reasons many high-performance solid rocket motors are made from segmented propellant grains with non-uniform port geometry. In this paper parametric studies have been carried out to examine the geometric dependence of transient flow features in solid rockets with non-uniform ports. Numerical computations have been carried out in an inert simulator of solid propellant rocket motor with the aid of a standard k-ω turbulence model. It was seen that the damping of the temperature fluctuation is faster in solid rocket with convergent port than with divergent port geometry. We inferred that the damping of the flow fluctuations using the port geometry is a meaningful objective for the suppression and control of the instability and/or pressure/thrust oscillations during the starting transient of solid rockets.展开更多
文摘Based on the physical layer standard of cdma2000, the performance analysis of fixed point simulations is presented in this paper on cdma2000 1x downlink. The effects of quantization and finite wordlength, which have typically been assumed negligible in floating point simulations, become significant for fixed point simulations. The complete fixed point simulation platform for cdma2000 1x downlink is developed by EDA tool - COSSAP. The structure and performance of the key component in cdma2000 systems, the RAKE receiver, are discussed in details. Comparisons of results between floating point and fixed point simulations lead to some important conclusions, which provide certain references for the implementation of practical systems.
基金Supported by the National 863 Program of China （No.2006AA12Z325） and the National Natural Science Foundation of China （No.40274005）.
文摘To obtain higher accurate position estimates, the stochastic model is estimated by using residual of observations, hence, the stochastic model describes the noise and bias in measurements more realistically. By using GPS data and broadcast ephemeris, the numerical results indicating the accurate position estimates at sub-meter level are obtainable.
文摘A new position group contribution model is proposed for the estimation of normal boiling data of organic compounds involving a carbon chain from C2 to C18.The characteristic of this method is the use of position distribution function.It could distinguish most of isomers that include cis-or trans-structure from organic compounds.Contributions for hydrocarbons and hydrocarbon derivatives containing oxygen,nitrogen,chlorine,bromine and sulfur,are given.Compared with the predictions,results made use of the most common existing group contribution methods,the overall average absolute difference of boiling point predictions of 417 organic compounds is 4.2 K;and the average absolute percent derivation is 1.0%,which is compared with 12.3 K and 3.2% with the method of Joback,12.1 K and 3.1% with the method of Constantinou-Gani.This new position contribution groups method is not only much more accurate but also has the advantages of simplicity and stability.
基金This research work is supported by the Projects of National Science Foundation of China （Grant No, 40574052 and 40437018） and National Basic Research Program of China （973 Program） （Grant No. 2007CB209603）.Acknowledgements We wish to thank Researcher Xu Tao for his advice and comment. We also thank Mrs. Wang Kun for her help in the process of translation.
文摘In view of the relative positioning problem between non-regular quadrilateral grids and regular rectangle grid nodes in the wave front construction method, concrete realization problems with four grid positioning methods （vector cross product judgment, angle sum, intersection-point, and signs comparison algorithms） in wave front construction which are commonly used in computer graphics are compared and analyzed in this paper. Based on the stability analysis of the location method, the calculation examples show that the vector cross product judgment method is faster and more accurate than other methods in the realization of the relative positioning between non-regular quadrilateral grids and regular rectangle grid nodes in wave front construction. It provides precise grid point attribute values for the next steps of migration and demigration.
基金supported by the NSF of China under Grant No.61174039
文摘This paper studies existence and uniqueness for random impulsive differential equations.The authors first generalize a random fixed point theorem of Schaefer's type.Then the authors shall rely on the generalized Schaefer's type random fixed point theorem to discuss the existence of the system.In addition,the authors study the existence and uniqueness of random impulsive differential equations by applying random Banach fixed point theorem and obtain some less conservative results.Finally,an example is given to illustrate the effectiveness of the results.
文摘Wet oxidation procedure,i.e.,Walkley-Black (WB) method,is a routine,relatively accurate,and popular method for the determination of soil organic matter (SOM) but it is time-consuming,costly and also has a high potential to cause environmental pollution because of disposal of chromium and strong acids used in this analysis.Therefore,loss-on-ignition (LOI) procedure,a simple and cheap method for SOM estimation,which also avoids chromic acid wastes,deserves more attention.The aims of this research were to study the statistical relationships between SOM determined with the LOI (SOMLOI) and WB (SOMWB) methods to compare the spatial variability of SOM in two major plains,Shahrekord and Koohrang plains,of Chaharmahal-va-Bakhtiari Province,Iran.Fifty surface soil samples (0-25 cm) were randomly collected in each plain to determine SOM using the WB method and the LOI procedure at 300,360,400,500 and 550 ℃ for 2 h.The samples covered wide ranges of soil texture and calcium carbonate equivalent (CCE).The general linear form of the regression equation was calculated to estimate SOM LOI from SOM obtained by the WB method for both overall samples and individual plains.Forty soil samples were also randomly selected to compare the SOM and CCE before and after ignition at each temperature.Overall accuracy of the continuous maps generated for the LOI and WB methods was considered to determine the accordance of two procedures.Results showed a significant positive linear relationship between SOM LOI and SOM WB.Coefficients of determination (R2) of the equations for individual plains were higher than that of the overall equation.Coefficients of determination and line slopes decreased and root mean square error (RMSE) increased with increasing ignition temperature,which may be due to the mineral structural water loss and destruction of carbonates at higher temperatures.A temperature around 360 ℃ was identified as optimum as it burnt most organic carbon,destroyed less inorganic carbon,caused less clay structural water loss,and used less electrical energy.Although the trends of SOM in the kriged maps by the two procedures accorded well,low overall accuracy was observed for the maps obtained by the two methods.While not suitable for determination where high accuracy is required,determination of organic carbon through LOI is likely suitable for exploratory soil surveys where rough estimation of organic matter is required.
基金Supported by the "Hundred Talents Program" of the Chinese Academy of Sciences
文摘There is a need for determinations of soil organic carbon (SOC) and inorganic carbon (SIC) due to increasing interest in soil carbon sequestration. Two sets of soil samples were collected separately from the Yanqi Basin of northwest China to evaluate loss-on-ignition (LOI) method for estimating SOC and SIC in arid soils through determining SOC using an element analyzer, a modified Walkley-Black method and a LOI method with combustion at 375℃ for 17 h and determining SIC using a pressure calcimeter method and a LOI procedure estimated by a weight loss between 375 to 800℃. Our results indicated that the Walkley-Black method provided 99%recovery of SOC for the arid soils tested. There were strong linear relationships(r > 0.93, P < 0.001) for both SOC and SIC between the traditional method and the LOI technique. One set of soil samples was used to develop relationships between LOI and SOC(by the Walkley-Black method), and between LOI and SIC(by the pressure calcimeter method), and the other set of soil samples was used to evaluate the derived equations by comparing predicted SOC and SIC with measured values. The mean absolute errors were small for both SOC (1.7 g C kg-1) and SIC(1.22 g C kg-1), demonstrating that the LOI method was reliable and could provide accurate estimates of SOC and SIC for arid soils.
文摘For technological reasons many high-performance solid rocket motors are made from segmented propellant grains with non-uniform port geometry. In this paper parametric studies have been carried out to examine the geometric dependence of transient flow features in solid rockets with non-uniform ports. Numerical computations have been carried out in an inert simulator of solid propellant rocket motor with the aid of a standard k-ω turbulence model. It was seen that the damping of the temperature fluctuation is faster in solid rocket with convergent port than with divergent port geometry. We inferred that the damping of the flow fluctuations using the port geometry is a meaningful objective for the suppression and control of the instability and/or pressure/thrust oscillations during the starting transient of solid rockets.
