实型数据的非比较分段排序算法

实型数据非比较分段排序算法 (简称RNCSS)是根据实型数据机内编码的特点提出来的一种快速非比较排序算法 ,文中给出了算法的分析和关键的源程序段。该算法的时间复杂度为 0 (N) ,且附加存储空间极小 。

基于AutoCAD VBA的两圆外公切线编程

以两圆外公切线为例讲述了AutoCAD VBA的编程方法,内容包括点的拾取或输入,双精度实型数据的输入,圆和直线的画法,圆与圆、直线与圆交点的计算方法。

CASE语句中表达式的几种确定方法

在用CASE语句实现多分支结构时 ,表达式的确定是个关键 。

Wide angle reflections in OBC seismic physical model experiment

Wide angle acquisition has been taken as a significant measure to obtain high quality seismic data and is getting greater attention, In this paper, we discuss ocean bottom cable （OBC） seismic wide angle reflections on the basis of a layered model experiment. Some experiment results don＇t support theoretical conclusions. The main experimental conclusions are： 1. Wide angle reflection energies are stronger than non-wide-angle reflections （up to twice as strong） but there is a big difference between observations and theoretical calculations that suggest the wide angle reflection energies are 15 times the non- wide-angle reflection energy. The reflection energy increases gradually rather than sharply as the theoretical calculations suggest. 2. The reflection events remain hyperbolic when the offset increases. 3. Wide angle reflection dominant frequency is about 20-30% less than non- wide-angle reflections and decreases as the offset increases. The non-wide-angle reflection dominant frequency shows no obvious variation for small offsets. 4. There is no wave shape mutation or polarity reversal near the critical angle. 5. The reflection event group features are the same for both cases of incidence angle greater and less than the critical angle. 6. Direct arrivals, multiples, and water bottom refractions influence the wide angle reflections of the sea floor.

STUDY AND IMPROVEMENT OF MLS RELATIONAL DATA MODEL

The conception of multilevel security (MLS) is commonly used in the study of data model for secure database. But there are some limitations in the basic MLS model, such as inference channels. The availability and data integrity of the system are seriously constrained by it′s 'No Read Up, No Write Down' property in the basic MLS model. In order to eliminate the covert channels, the polyinstantiation and the cover story are used in the new data model. The read and write rules have been redefined for improving the agility and usability of the system based on the MLS model. All the methods in the improved data model make the system more secure, agile and usable.

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous （ARMAX） input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this papel; the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input and outputs, respectively. The experimental data, used in this study, were collected from a full-scale rough vertical cylinder at the Delft Hydraulics Laboratory. The practicality of the proposed method and also its efficiency in structural modeling were demonstrated through applying two hydrodynamic force components. For this purpose, an ARMAX model is first used to capture the dynamics of the process, relating in-line forces provided by water waves; secondly, the TARMAX model was applied to modeling and analysis of the lift forces on the cylinder. The evaluation of the lift force by the TARMAX model shows the model is successful in modeling the force from the surface elevation.

Study on Collision Between Two Ships Using Selected Parameters in Collision Simulation

In the present analysis, several parameters used in a numerical simulation are investigated in an integrated study to obtain their influence on the process and results of this simulation. The parameters studied are element formulation, friction coefficient, and material model. Numerical simulations using the non-linear finite element method are conducted to produce virtual experimental data for several collision scenarios. Pattern and size damages caused by collision in a real accident case are assumed as real experimental data, and these are used to validate the method. The element model study performed indicates that the Belytschko-Tsay element formulation should be recommended for use in virtual experiments. It is recommended that the real value of the friction coefficient for materials involved is applied in simulations. For the study of the material model, the application of materials with high yield strength is recommended for use in the side hull structure.

Viscoelasto-plastic rheological experiment under circular increment step load and unload and nonlinear creep model of soft rocks

The viscoelastic-plastic creep experiments on soft ore-rock in Jinchuan Mine III were performed under circular increment step load and unload. The experimental data were analyzed according to instantaneous elastic strain, visco-elastic strain, instantaneous plastic strain and visco-plastic strain. The result shows that instantaneous deformation modulus tends to increase with the increase of creep stress; soft rocks enhance the ability to resist instantaneous elastic deformation and instantaneous plastic deformation during the multi-level of load and unload in the cyclic process. In respect of specimen JC1099, the ratio of visco-elastic strain to visco-plastic strain varies from 3.15 to 6.58, and the ratio has decreasing tendency with stress increase as a whole; creep deformation tends to be a steady state at low stress level; soft rocks creep usually embodies accelerated creep properties at high stress level. With the damaging variable and the hardening function introduced, a nonlinear creep model of soft rocks is established, in which the decay creep is described by the nonlinear hardening function H of viscidity coefficient. The model can describe the accelerated creep of soft rocks since the nonlinear damaging evolvement variable D of deformation parameter of rocks is introduced. Three stages of soft rocks creep can be described with the uniform creep equation in the nonlinear creep model. With this nonlinear creep model applied to the creep experiments of the ore-rock of Jinchuan Mine III, the nonlinear creep model＇s curves are in good agreement with experimental data.

Comparisons of three data storage models in parametric temporal databases

The parametric temporal data model captures a real world entity in a single tuple, which reduces query language complexity. Such a data model, however, is difficult to be implemented on top of conventional databases because of its unfixed attribute sizes. XML is a matured technology and can be an elegant solution for such challenge. Representing data in XML trigger a question about storage efficiency. The goal of this work is to provide a straightforward answer to such a question. To this end, we compare three different storage models for the parametric temporal data model and show that XML is not worse than any other approaches. Furthermore, XML outperforms the other storages under certain conditions. Therefore, our simulation results provide a positive indication that the myth about XML is not true in the parametric temporal data model.

Experimental and Kinetic Study of Selective Catalytic Reduction of NO with NH_3 over CuO/Al_2O_3/Cordierite Catalyst

The CuO/γ-Al2O3/cordierite catalyst, after being sulfated by sulfur dioxide (SO2) at 673 K, exhibits high activities for selective catalytic reduction (SCR) of nitrogen oxide (NO) with ammonia (NH3) at 573-723 K. The intrinsic kinetics of SCR of NO with NH3 over CuO/γ-Al2O3/cordierite catalyst has been measured in a fixed-bed reactor in the absence of internal and external diffusions. The experimental results show that the reaction rate can be quantified by a first-order expression with activation energy Eá of 94.01 kJ·mol-1 and the corresponding p re-exponential factor A′ of 3.39×108 cm3·g-1·s-1 when NH3 is excessive. However, when NH3 is not enough, an E ley-Rideal kinetic model based on experimental data is derived with Ea of 105.79 kJ·mol-1, the corresponding A of 2 .94×109 cm3·g-1·s-1, heat of adsorption-Hads of 87.90 kJ·mol-1 and the corresponding Aads of 9.24 cm3·mol-1. The intrinsic kinetic model obtained was incorporated in a 3D mathematical model of monolithic reactor, and the agreement of the prediction with experimental data indicates that the present kinetic model is adequate for the reac-tor design and engineering scale-up.

Kinetic Modeling of the Photocatalytic Degradation of Methyl Orange by Supported TiO2

The photocatalytic degradation of methyl orange （MO） in UV/Supported-TiO2 system was investigated and a kinetic model was presented. The experimental results show that the photocatalytic degradation rate is favored by high concentration of dye in solution and is enhanced by the solution temperature. A simple kinetic model has been proposed which can describe the discoloration process in an adequate way. The calculated results obtained were in good agreement with experimental data. The model predicts the concentration of MO during the photocatalytic degradation process.

Qualification of Three Analytical Wake Models

The decrease of wind velocity （wake losses） in downstream area of wind turbine is generally quantified using wake models. The overall estimated power of wind farm varies according to reliability of wake model used, however it＇s unclear which model is most appropriate and able to give a high performance in predicting wind velocity deficit. In this subject, a qualification of three analytical wake models （Jensen, lshihara and Frandsen） based on three principal criteria is presented in this paper： （i） the parsimony which characterizes the inverse of model complexity, （ii） the accuracy of estimation in which wake model is compared with the experimental data and （iii） imprecision that is related to assumptions and uncertainty on the value of variables considered in each model. This qualitative analysis shows the inability of wake models to predict wind velocity deficit due to the big uncertainty of variables considered and it sensitivity to wind farm characteristic.

Influence of Tacking Sequence on Residual Stress and Distortion of Single Sided Fillet Submerged Arc Welded Joint

Submerged arc welding （SAW） is advantageous for joining high thickness materials in large structure due to high material deposition rate. The non-uniform heating and cooling generates the thermal stresses and subsequently the residual stresses and distortion. The longitudinal and transverse residual stresses and angular distortion are generally measured in large panel structure of submerged arc welded fillet joints. Hence, the objective of this present work is to quantify the amount of residual stress and distortion in and around the weld joint due to positioning of stiffeners tack. The tacking sequence influences the level of residual stress and proper controlling of tacking sequences is required to minimize the stress. In present study, an elasto-plastic material behavior is considered to develop the thermo mechanical model which predicts the residual stress and angular distortion with varying tacking sequences. The simulated result reveals that the tacking sequence heavily influences the residual stress and deformation pattern of the single sided fillet joint. The finite element based numerical model is calibrated by comparing the experimental data from published literature. Henceforth, the angular distortions are measured from an in-house developed experimental set-up. A fair agreement between the predicted and experimental results indicates the robustness of the developed numerical model. However, the most significant conclusion from present study states that tack weld position should be placed opposite to the fillet weld side to minimize the residual stress.

Decision Model of Knowledge Transfer in Big Data Environment

A decision model of knowledge transfer is presented on the basis of the characteristics of knowledge transfer in a big data environment.This model can determine the weight of knowledge transferred from another enterprise or from a big data provider.Numerous simulation experiments are implemented to test the efficiency of the optimization model.Simulation experiment results show that when increasing the weight of knowledge from big data knowledge provider,the total discount expectation of profits will increase,and the transfer cost will be reduced.The calculated results are in accordance with the actual economic situation.The optimization model can provide useful decision support for enterprises in a big data environment.

A Modified Peng-Robinson Equation State for Prediction of Gas Adsorption Isotherm

This research proposes a modified two-dimensional Peng-Robinson equation model to predict adsorption isotherm in adsorbate-adsorbent systems. The parameters of the proposed model are calculated by using the optimization of experimental data for the different single gas adsorption systems at various temperatures. The experimental adsorption equilibrium data of adsorbate-adsorbent systems was compared with the calculated results in our proposed model and the two-dimensional Hill-deBoer equation model. The proposed model as indicated in the results shows a better prediction of the experimental results compared with two others.

Optical closure of parameterized bio-optical relationships

An optical closure study on bio-optical relationships was carried out using radiative transfer model matrix operator method developed by Freie Universitat Berlin. As a case study, the optical closure of bio-optical relationships empirically parameterized with in situ data for the East China Sea was examined. Remote-sensing reflectance （Rrs） was computed from the inherent optical properties predicted by these biooptical relationships and compared with published in situ data. It was found that the simulated Rrs was overestimated for turbid water. To achieve optical closure, bio-optical relationships for absorption and scattering coefficients for suspended particulate matter were adjusted. Furthermore, the results show that the Fournier and Forand phase functions obtained from the adjusted relationships perform better than the Petzold phase function. Therefore, before bio-optical relationships are used for a local sea area, the optical closure should be examined.

A Real-time Data Model Based on Temporal Data

Real-time database systems contain not only transaction timing constraints, but also data timing constraints. This paper discusses the temporal characteristics of data in real-time databases and offers a definition of absolute and relative temporal consistency. In real-time database systems, it is often the case that the policies of transaction schedules only consider the deadline of real-time transactions, making it insufficient to ensure temporal correctness of transactions. A policy is given by considering both the deadlines of transactions and the “data deadline” to schedule real-time transactions. A real-time relational data model and a real-time relational algebra based on the characteristics of temporal data are also proposed. In this model, the temporal data has not only corresponding values, but also validity intervals corresponding to the data values. At the same time, this model is able to keep historical data values. When validity interval of a relation is [NOW, NOW], real-time relational algebra will transform to traditional relational algebra.

Adsorption of Aqueous Solution of O-Xylene on Modified Halloysite Adsorbents

In this study, the adsorption of o-xylene was investigated using modified halloysite adsorbents. The modification of the halloysite adsorbents depended on thermal processing, treated sulphuric acid（Vl） and sodium hydroxide, water solution of ammonium chloride as well as hexadecylotrimethyloammonium bromide. Adsorption rate constants of the pseudo-second order models were compared for experiment carried in the batch system. Langmuir and Freundlich to fit the adsorption equilibrium experimental data. pseudo-first and models were able

Measurement and Correlation of Vapor-Liquid Equilibria for Hexamethyl Disiloxane+Vinyl Acetate System at 101.3 kPa

Vapor-liquid equilibrium data of hexamethyl disiloxane+vinyl acetate system at 101.3kPa were measured by using double circulating vapor-liquid equilibrium still.The thermodynamic consistency of the VLE data was examined by Herrington method.Experimental data was correlated by non-random two-liquid(NRTL),Wilson and universal quasichemical(UNIQUAC)parameter models.All the models satisfactorily correlated with the VLE data.The result showed that the NRTL model was the most suitable one to represent experimental data satisfactorily.The system had a minimum temperature azeotrope at 345.71 K and the mole azeotropic composition was 0.0541.

Removal of diclofenac from aqueous solution with multi-walled carbon nanotubes modified by nitric acid

Modified multi-walled carbon nanotubes(MWCNTs) were used as adsorbents for removal of diclofenac. The reaction conditions were examined. Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models were applied to determine appropriate equilibrium expression. The results show that the experimental data fit the Freundlich equation well. Thermodynamic parameters show that the adsorption process is spontaneous and exothermic. The kinetic study indicates that the adsorption of diclofenac can be well described with the pseudo-second-order kinetic model and the process is controlled by multiple steps.