The authors propose a new persistent transmission based real time Ethernet MAC protocol that provides a predictable upper bound for the delivery delay of real time frames. Moreover, it is compatible with the protocol ...The authors propose a new persistent transmission based real time Ethernet MAC protocol that provides a predictable upper bound for the delivery delay of real time frames. Moreover, it is compatible with the protocol used by the existing Ethernet controllers for conventional datagram traffic and thus standard Ethernet stations can be used in the system without any modification. The paper describes the protocol in detail and analyses the maximum delivery delay for real time traffic and the efficiency of the channel.展开更多
In order to optimize the embedded system implementation for Ethernet-based computer numerical control (CNC) system, it is very necessary to establish the performance analysis model and further adopt the codesign met...In order to optimize the embedded system implementation for Ethernet-based computer numerical control (CNC) system, it is very necessary to establish the performance analysis model and further adopt the codesign method from the control, communication and computing perspectives. On the basis of analyzing real-time Ethemet, system architecture, time characteristic parameters of control-loop ere, a performance analysis model for real-time Ethemet-based CNC system was proposed, which is able to include the timing effects caused by the implementation platform in the simulation. The key for establishing the model is accomplished by designing the error analysis module and the controller nodes. Under the restraint of CPU resource and communication bandwidth, the experiment with a case study was conducted, and the results show that if the deadline miss ratio of data packets is 0.2%, then the percentage error is 1.105%. The proposed model can be used at several stages of CNC system development.展开更多
基金TheNationalNaturalScienceFoundationofChina (No .6 9984 0 0 3)
文摘The authors propose a new persistent transmission based real time Ethernet MAC protocol that provides a predictable upper bound for the delivery delay of real time frames. Moreover, it is compatible with the protocol used by the existing Ethernet controllers for conventional datagram traffic and thus standard Ethernet stations can be used in the system without any modification. The paper describes the protocol in detail and analyses the maximum delivery delay for real time traffic and the efficiency of the channel.
基金Projects(50875090,50905063) supported by the National Natural Science Foundation of ChinaProject(2009AA04Z111) supported by the National High Technology Research and Development Program of China+2 种基金Project(20090460769) supported by China Postdoctoral Science FoundationProject(2011ZM0070) supported by the Fundamental Research Funds for the Central Universities in ChinaProject(S2011010001155) supported by the Natural Science Foundation of Guangdong Province,China
文摘In order to optimize the embedded system implementation for Ethernet-based computer numerical control (CNC) system, it is very necessary to establish the performance analysis model and further adopt the codesign method from the control, communication and computing perspectives. On the basis of analyzing real-time Ethemet, system architecture, time characteristic parameters of control-loop ere, a performance analysis model for real-time Ethemet-based CNC system was proposed, which is able to include the timing effects caused by the implementation platform in the simulation. The key for establishing the model is accomplished by designing the error analysis module and the controller nodes. Under the restraint of CPU resource and communication bandwidth, the experiment with a case study was conducted, and the results show that if the deadline miss ratio of data packets is 0.2%, then the percentage error is 1.105%. The proposed model can be used at several stages of CNC system development.