论王夫之对张载气本论的继承和发展

王夫之是我国古代朴素唯物主义和朴素辩证法的集大成者 ,他的气本论主要是在张载气本论思想体系的基础上继承和发展起来的。通过对二者气本论思想的论述 ,从气之实有性、能动性、规律性等三个方面 ,对王夫之是如何具体的继承和发展张载的气本论进行了详细论证。

Modeling commuters' route choice behavior under pre-trip information system

Research about the auto commuter＇s pre-trip route choice behavior ignores the combined influence of the real-time information and all respondents＇ historical information in the existing documents.To overcome this shortcoming,an approach to describing the pre-trip route choice behavior with the incorporation of the real-time and historical information is proposed.Two types of real-time information are investigated,which are quantitative information and prescriptive information.By using the bounded rationality theory,the influence of historical information on the real-time information reference process is examined first.Estimation results show that the historical information has a significant influence on the quantitative information reference process,but not on the prescriptive information reference process.Then the route choice behavior is modeled.A comparison is also made among three route choice models,one of which does not incorporate the real-time information reference process,while the others do.Estimation results show that the route choice behavior is better described with the consideration of the reference process of both quantitative and prescriptive information.

小说新闻化及其美学倾向

在一切艺术形态中,真善美三者之间互相联系,尤以真为最基本。艺术作品真实性的价值必须是创作者全力追求的。 小说真实性的价值的实现有诸多手段,新闻化就是其中之一。它大致包括(一)在叙述中借助新闻语言制造新闻真实效果;(二)在体裁上与新闻联姻。它们的全部目的在于实现“真实”的价值。

Accuracy analysis of plane-strain bulge test for determining mechanical properties of thin films

The effect of a variety of geometrics, initial conditions and material properties on the deformation behavior of thin films in the plane-strain bulge test was systematically scrutinized by performing the finite element analysis, and then the accuracy of the plane-strain bulge test in determining the mechanical properties of thin films in terms of our finite element results was analyzed. The results indicate that although the determination of the plane-strain modulus in the light of the plane-strain bulge equation is fairly accurate, the calculation of the residual stress is not satisfied as expected, especially for low residual stress. Finally, an approach is proposed for analyzing bulge test data, which will improve the accuracy and reliability of this bulge test technique.

Numerical simulation of residual stress field in green power metallurgy compacts by modified Drucker-Prager Cap model

Compaction process simulation and residual stress prediction of green PM compact were carried out with elasto-plastic 3D FEA based on the modified Drueker-Prager Cap model in Abaqus. The model parameters of the investigated powder Distaloy AE were determined as functions of relative density through typical mechanical property tests of powder. The model was implemented as a user subroutine USDFLD. Single sided compaction of a d20 ram^5 mm disk green compact of Distaloy AE was simulated, and the residual stress of the disk after ejection was predicted with FEA. The FEA results of the compaction process and the residual stress of the disk show good agreement with compaction experiments and X-ray diffraction measurements, which validates the model and its parameters. The results indicate that the compressive residual stresses exist mainly in a thin layer on the side surface, but the residual stresses are very small on the top and bottom surfaces.

Evaluation of College English Test

There has been much heated discussion on College English Test for non-English majors Band 4 and Band 6 because it has exerted great influence on English teaching in Chinese universities. This essay is intended to explore the reliability, validity,practicality and washback of this large-scale test by focusing on CET Band 4. The author of this report discusses the merits as well as some existing problems of this test and offers some suggestions at the end of the essay.

Limits of Level 3 Fair Value Measurement： Based on Conceptual Framework

The IASB stated that in the review of the conceptual framework, if measurement uncertainty is very high, a measurement basis different from fair value may provide more appropriate information. Level 3 fair value measurements are inappropriate for areas （called ＂Level 4＂ by the author） in which models are not formulated and that have material uncertainty in measurement. The purpose of this paper is to elucidate ＂measurement uncertainty＂, which impacts ＂faithful representation＂ in fair value measurement, from the perspective of ＂verifiability＂. To do so, it will employ a conceptual examination of the limits of Level 3 fair value measurement based on IFRS 13 （Fair Value Measurement）. While taking into consideration recent discussions on reviewing conceptual framework, the author will reorganize the conceptual categories of verifiability （i.e., clarification of the ＂reasonable verifiability＂ categories） to underpin the fact that material uncertainties in measurement have obstructed constructing faithful representation. In addition, the author will discuss the problem that the dichotomy of direct and indirect found in IASB is not accurate enough to fully understand the concept of verifiability. In this context, the author will also suggest that the concept of verifiability, reorganized through ＂reasonable verifiability＂, can satisfy the requirements for constructing faithful representation.

Loading System for Full-Scale Heavy-Duty Support Node Test with Multi-Directional Loading Requirements

This paper presents the design, analysis and experimental study of a loading system for heavy-duty nodes test based on a large-scale multi-directional in-plane loading device, which has been used in a full-scale heavy-duty support node test. Test loads of the support reached 6 567 kN with multi-directional loading requirements, which outrange the capacity of the available loading devices. Through the reinforcement of a large-scale multi-directional inplane loading device, the innovative design of a self-balanced load transferring device, and other arrangement considerations of the loading system, the test was implemented and the loading capacity of the ring was considerably enlarged. Due to the heavy loading requirements, some checking computations of the ring and the load transferring device outranged the limit of the Chinese national code "Code for Design of Steel Structures (GB 50017—2003)", thus elastic-plastic finite element (FE) analysis was carried out on the two devices, and also the real-time monitoring on the whole loading systems during experiments to ensure test safety. FE analysis and test results show that the loading system worked elastically during experiments.

An Effective Concept Extraction Method for Improving Text Classification Performance

This paper presents anew way to extract concept that can beused to improve text classification per-formance (precision and recall). Thecomputational measure will be dividedinto two layers. The bottom layercalled document layer is concernedwith extracting the concepts of parti-cular document and the upper layercalled category layer is with findingthe description and subject concepts ofparticular category. The relevant im-plementation algorithm that dramatic-ally decreases the search space is dis-cussed in detail. The experiment basedon real-world data collected from Info-Bank shows that the approach is supe-rior to the traditional ones.

Design and passive analysis of a novel softness display device

Simulating the softness property of object is quite a challenge in virtual reality system. A novel softness display system was developed based on the principle of deformable length of elastic element control （DLEEC）. In the system, the equivalent stiffness of the device is adjustable, and is inversely proportional to the third power of the deformable length of elastic beam. PD position control is employed to guarantee the accurate softness display. The softness of the virtual objects in large scale can be felt with the softness display device. Compared with other haptic devices, the device is passive and exert the react force only when the operator ＂actively touch＂ the virtual objects. The stability of the softness display system was analyzed. It was theoretical proved that the system satisfied the criteria of wide impedance range ＂Z-width＂, and the performance was superior to an active system. The experimental results were presented.

Special epoxy silicone adhesive for inertial confinement fusion experiment

The effects of toughener and coupling agent on special epoxy silicone adhesive were discussed by researching the surface morphology characters, thermal properties and shear strength of the adhesive. The results indicate that silicone coupling agent (KH-550) can improve the shear strength of the epoxy silicone adhesive effectively. The mass fraction of the toughener in the epoxy silicone adhesive plays an important role in its properties. When the mass fraction of the toughener is less than 14%, the shear strength of the adhesive is low. When the mass fraction of the toughener is over 33%, thermal properties and shear strength of the adhesive decrease with the increasing of the toughener. The mass fraction of toughener of 25% results in good integral properties of the epoxy silicone adhesive. The morphologic analysis indicates that the micro-phase separation exists in the epoxy molecular chain and the silicone molecular chain of the epoxy silicone adhesive.

Influence of crystallographic orientation on growth behavior of spherical voids

The influence of crystallographic orientation on the void growth in FCC crystals was numerically simulated with 3D crystal plasticity finite element by using a 3D unit cell including a spherical void, and the rate-dependent crystal plasticity theory was implemented as a user material subroutine. The results of the simulations show that crystallographic orientation has significant influence on the growth behavior of the void. Different active slip systems of the regions around the void cause the discontinuity in lattice rotation around the void, and the corner-like region is formed. In the case of the void located at grain boundary, large heterogeneous deformation occurs between the two grains, and the equivalent plastic deformation along grain boundary near the void in the case of θ=45^o （θ is the angle between grain boundary direction and X-axis） is larger than the others. Large difference of orientation factor of the two grains leads to large equivalent plastic deformation along grain boundary, and the unit cell is more likely to fail by intergranular fracture.

Adsorption of volatile organic compounds on three activated carbon samples:Effect of pore structure

To investigate the influence of the activated carbon pore structure on the adsorption of volatile organic compounds （VOCs）, three commercial activated carbon samples were chosen. The fixed-bed thermostatic adsorption experiments were conducted under certain conditions, where toluene, acetone, and 1, 2-dichloroethane acted as adsorbents. Then, the incidence relation between the experimental results and the activated carbon pore structure was analyzed. After that, the results of the correlation analysis were verified in accordance with fractal theory and adsorption characteristic curve analysis. The results show that the pore diameter gradient is helpful for strengthening the intemal diffusion. Under the same condition, the adsorption of organic gases tends to be selective, and the positions of toluene, acetone and 1, 2-dichloroethane adsorbed on the activated carbon are mainly in the ranges of 1.27-1.49 nm, 0.67-0.84 nm and 1.39-1.75 nm, respectively. The relationship between adsorption capacity and activated carbon pore volume can accurately explain the spreading process of the adsorbents in the activated carbon.

Verification of Seismic Performance of Pile Foundation in Composite Ground through Experimental and Numerical Methods

A new construction method of pile foundation in composite ground, in which, prior to installing piles, the ground is improved around the heads of the piles in soft ground or ground subject to liquefaction, which is introduced in this paper. This construction method uses a combination of pile foundation construction together with common ground improvement methods, including deep mixing, preloading and sand compaction piling, and it is referred to as the composite ground pile method. Since an artificial ground with relatively high rigidity comparing with that of the original ground was formed around the pile in this method, and the seismic performance has not been made clear, thus the seismic performance of piles in composite ground was systematically analyzed through a series of centrifuge model tests and numerical analyses by using dynamic nonlinear finite element method, and a verification method for the seismic performance of piles in composite ground was proposed on the basis of the experimental and numerical results.

Effect of wall temperature and random distribution of micro organic dust particles on their combustion parameters

The effect of wall temperature on the characteristics of random combustion of micro organic particles with recirculation was investigated. The effect of recirculating in micro-combustors is noticeable, hence it is necessary to present a model to describe the combustion process in these technologies. Recirculation phenomenon is evaluated by entering the exhausted heat from the post flam zone into the preheat zone. In this work, for modeling of random situation at the flame front, the source term in the equation of energy was modeled considering random situation for volatizing of particles in preheat zone. The comparison of obtained results from the proposed model by experimental data regards that the random model has a better agreement with experimental data than non-random model. Also, according to the results obtained by this model, wall temperature affects the amount of heat recirculation directly and higher values of wall temperature will lead to higher amounts of burning velocity and flame temperature.

On the Solutions of xn＋1=f（xn）/xn-1Where fis Piecewise Linear

Our goal in this paper is to examine the long-term behavior of solutions of the following difference equation xn＋1=f（xn）/xn-1 wherefis piecewise linear, and the initial values x-1 and xoare non-zero real numbers. We examine the boundedness, periodicity, and the existence of oscillatory solutions.

Weaver Ant, Oecophylla Ionginoda （Latreille） （Hymenoptera： Formicidae） Activity Reduces Fruit Fly Damage in Citrus Orchards

Fruit flies are causing extensive socio-economic losses in citrus orchards in Ghana. The flies as quarantine pests have detrimental effects on the export market due to international trade regulations. Oecophylla species have been tested as biological control agents on other crops, and have shown great potential in reducing the effects of pests. The effectiveness of Oecophylla as a biocontrol agent of fruit flies was compared with insecticide, Cypermethrin ＋ Dimethoate （Cydim super~） at Forest and Horticultural Crops Research Centre, Kade, in the Eastern Region of Ghana. The results have shown that trees colonized by Oecophylla had between 6%-10% fly infestation and Cypermethrin ＋ Dimethoate （1614 mg a.i. mL~ tree＂1） recorded 3.0% infestation. Cypermethrin ＋ Dimethoate treatment recorded 3.50 ~ 0.87 dropped fruits, and Oecophylla colonized-trees recorded 15 to 19.20 -4- 3.61. Oecophylla colonized-trees recorded yield values from 12.90 to 15.20 tons ha-~ whilst Cypermethrin ＋ Dimethoate treatment recorded 27.90 tons hat fruit yield. Total number of fly landings in the presence of Oecophylla （72.00） was significantly lower than the absence of Oecophylla （114.20）. Set-up with no Oecophylla recorded the highest infestation index （71.17） while the presence recorded 45.83. These results suggest that Oecophylla longinoda can be used as a biocontrol agent for IPM programs in citrus orchards.

Experimental and Numerical Investigations on Vibration Characteristics of a Loaded Ship Model

In this paper, the vibration characteristics of the structure in the finite fluid domain are analyzed using a coupled finite element method. The added mass matrix is calculated with finite element method （FEM） by 8-node acoustic fluid elements. The vibration characteristics of the structure in the finite fluid domain are calculated combining structure FEM mass matrix. By writing relevant programs, the numerical analysis on vibration characteristics of a submerged cantilever rectangular plate in finite fluid domain and loaded ship model is performed. A modal identification experiment for the loaded ship model in air and in water is conducted and the experiment results verify the reliability of the numerical analysis. The numerical method can be used for further research on vibration characteristics and acoustic radiation problems of the structure in the finite fluid domain.

儒家與佛教的時間觀及其現代啓示

本文分析儒家與佛教的時間觀之同異及其現代啓示,指出儒家時間觀以“循環時間觀”爲最重要表現,儒家從“時間性”之中萃取“超時間性”的道德命題,發揮“反事實性”論述的作用。佛教則主張“時間”之無獨立實有性及其虚妄性。儒家的時間有其具體性,是一種“生活所體驗的時間”,具有樂觀健動精神;佛教的時間觀是“概念化的時間”,人不應受此虚妄的時間所系縛,皆能對受到疏離與欲求所苦的現代人有所啓示。

论不昧虚实的译学居中元认知

目前的译学元认知分别存在实化与虚化的倾向:在一方面,一些价值目标的确立使译论话语的实有性愈发坚固,因而不断加强理论边界的框定力量;在另一方面,后现代主义思潮下又侵蚀和消融各种价值目标,因而不断将译论话语推向虚无之境。对此,本文主张不昧虚实的居中元认知。该认知跳出虚实之缚,自在游走于译论话语的实有性和虚无性之间,使翻译学既不会因执着于译论之“实有”而自囿于门户之见,又不会因译论之“虚无”而彷徨于迷惘沼泽,从而形成辩证性的升华思维,迈向更加圆融自在的学理姿态。