Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achie...Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achieve a real-time image pro- cessing for the moving objects. Firstly, the median filtering, gain calibration, image segmentation, image binarization, cor- ner detection and edge fitting are employed to process the images of the moving objects to make the image close to the real object. Then, the processed images are simultaneously displayed on a real-time basis to make it easier to analyze, understand and identify them, and thus it reduces the computation complexity. Finally, human-computer interaction (HCI)-friendly in- terface based on VC ++ is designed to accomplish the digital logic transform, image processing and real-time display of the objects. The experiment shows that the proposed algorithm and software design have better real-time performance and accu- racy which can meet the industrial needs.展开更多
AIM: To investigate dynamical and image pathological characteristics of the liver on magnetic resonance (MR) diffusion-weighted imaging (DWI) in the rabbit VX-2 tumor model. METHODS: Forty New Zealand rabbits we...AIM: To investigate dynamical and image pathological characteristics of the liver on magnetic resonance (MR) diffusion-weighted imaging (DWI) in the rabbit VX-2 tumor model. METHODS: Forty New Zealand rabbits were included in the study and VX-2 tumor piece was implanted intrahepatically. Fifteen animals received two intrahepatic implantations while 25 had one intrahepatical implantation. DWI, T1- and T2-weighted of magnetic resonance imaging (MRI) were carried out on the 7th and the 14th d after implantation and DWI was conducted, respectively on the 21th d. Ten VX-2 tumor samples were studied pathologically. RESULTS: The rate of lump detected by DWI, TlWI and T2WI was 78.7%, 10.7% and 53.5% (X^2 =32.61, P 〈 0.001) on the 7th d after implantation and 95.8%, 54.3% and 82.9% (X^2 = 21.50, P 〈 0.001) on the 14th d. The signal of most VX-2 tumors on DWI was uniform and it was equal diffusion coefficient (ADC). did not decrease on the 7th on the map of apparent The signal of VX tumors d after implantation, most of them slowly growing during the week following implantation without significant cell dying within the tumor. VX-2 tumors grew increasingly within 14 d after implantation but the signal of most VX-2 tumors on DWI or on the map of ADC was uniform or uneven and ADC of VX tumors decreased obscurely or slightly because tumor necrosis was still not obvious. On the 21th d after implantation, the signal of most VX-2 tumors on DWI or on the map of ADC was uneven because tumor necrosis was evident and ADC of VX-2 tumor necrotic areas decreased. The areas of viable cells in VX-2 tumors manifested a high signal on DWI and a low signal on the map of ADC. The areas of dead cells or necrosis in VX-2 tumors manifested low signals on DWI and low, equal or high signals on the map of ADC but they manifested high signals on DWI and on the map of ADC at the same time when the areas of necrotic tumor became liquefied or cystic. The border of tumors on DWI appeared gradually distinct and internal signals of tumor became progressively uneven. CONCLUSION: The manifestations of viable, necrotic and liquefied or cystic areas in VX-2 tumors on DWI are typical and DWI is of significant and potential values in clinical application in both the early detection and diagnosis of liver tumors.展开更多
A new real-time algorithm is proposed in this paperfor detecting moving object in color image sequencestaken from stationary cameras.This algorithm combines a temporal difference with an adaptive background subtractio...A new real-time algorithm is proposed in this paperfor detecting moving object in color image sequencestaken from stationary cameras.This algorithm combines a temporal difference with an adaptive background subtraction where the combination is novel.Ⅷ1en changes OCCUr.the background is automatically adapted to suit the new conditions.Forthe background model,a new model is proposed with each frame decomposed into regions and the model is based not only upon single pixel but also on the characteristic of a region.The hybrid presentationincludes a model for single pixel information and a model for the pixel’s neighboring area information.This new model of background can both improve the accuracy of segmentation due to that spatialinformation is taken into account and salientl5r speed up the processing procedure because porlion of neighboring pixel call be selected into modeling.The algorithm was successfully used in a video surveillance systern and the experiment result showsit call obtain a clearer foreground than the singleframe difference or background subtraction method.展开更多
Flume experiments and numerical simulation were conducted to characterize the hydrodynamics of a trapezoid artificial reef.Measurements in particle image velocimetry were conducted to observe the formation of upwellin...Flume experiments and numerical simulation were conducted to characterize the hydrodynamics of a trapezoid artificial reef.Measurements in particle image velocimetry were conducted to observe the formation of upwelling and vortices;and forces for the reef model were measured by load cell.The results of flume experiments agree well with the numerical data.In addition,the flow structure around a reef combining trapezoidal and cubic blocks was simulated numerically under two deployment schemes,showing a more complicated flow structure than that of a stand-alone reef.Relationship between drag coefficient and Reynolds number suggest that the degree of turbulence can be assessed from the value of drag coefficient downstream from the reef.The role of the reef in water flow is to reduce flow velocity and generate turbulence.展开更多
Based on microscope and image processing, a new method of auto tool setting for micro milling was presented. Firstly, a realtime image of tool setting area was obtained by microscope and CCD camera, then image process...Based on microscope and image processing, a new method of auto tool setting for micro milling was presented. Firstly, a realtime image of tool setting area was obtained by microscope and CCD camera, then image processing was carried out on this image and the gap between the tool and workpiece was calculated. The gap measurement was sent to motion controlling card to make the tool approach to the surface of workpiece. These steps were repeated until the gap is zero, which means that tool setting was finished. Moreover, a reliability verification test was conducted. Results indicated that the precision of tool setting is satisfactory.展开更多
In this paper, flow around two circular cylinders in tandem arrangement with unequal diameters has been investigated using the particle image velocimetry technique(PIV) in a water channel. The upstream to downstream d...In this paper, flow around two circular cylinders in tandem arrangement with unequal diameters has been investigated using the particle image velocimetry technique(PIV) in a water channel. The upstream to downstream diameter ratio was kept constant at d/D = 2/3, the centre-to-centre distance was varied from 1.2D to 5D and the Reynolds number was varied from 1200 to 4800. The flow characteristics were analyzed through ensemble-averaged patterns of velocity, vorticity, normalized Reynolds stress contours and streamlines. Based on ensemble-averaged and instantaneous flow fields, different flow patterns, including single-wakeshedding at small spacing ratio, bi-stable flow behavior(alternating behavior of reattachment and vortex shedding) at intermediate spacing ratio and co-shedding pattern at large spacing ratio were observed. The effects of Reynolds number and the centre-to-centre spacing ratio on flow patterns and turbulent characteristics were also investigated. It was found that the diameter ratio appears to have a certain effect on the flow patterns at intermediate spacing ratios, where the reattachment of shear layer depends on the lateral width of the wake flow in the lee of the upstream cylinder. Extensive discussion on the distributions of Reynolds stress and turbulent kinetic energy was presented.展开更多
The paper Proposes a colorfulness enhancement of pictorial images using image classifier based on chroma histogram. This approach firstly estimates strength of colorfulness of images and their types. With such determi...The paper Proposes a colorfulness enhancement of pictorial images using image classifier based on chroma histogram. This approach firstly estimates strength of colorfulness of images and their types. With such determined infomation, the algorithm automatical- ly adjusts image colorfulness for a better natural image look. With the help of an additional detection of skin colors and a pixel chroma adaptive local processing, the algodtlan produces more natural image look. The algorithm perfomance had been tested with an image quality judgment experiment of 20 persons. The experimental result indicates a better image preference.展开更多
The combustion condition in coal-fired furnaces of the large power station boiler is very complex and the flame emissivity is one of the important combustion parameters. A measurement method of the flame emissivity ba...The combustion condition in coal-fired furnaces of the large power station boiler is very complex and the flame emissivity is one of the important combustion parameters. A measurement method of the flame emissivity based on the blackbody furnace calibration of CCD (Charge Coupled Device) cameras and the color image processing techniques of computer was introduced. The experimental research on the flame emissivity in a 200 MW boiler furnace and a 300 MW boiler furnace was conducted respectively through the several CCD cameras installed at different height in furnace. The measurement results show: the flame emissivity increases with the increase of the unit load, the flame emissivity of the burner areas in furnace is the highest and the flame emissivity decrease with the increase of height of furnace above the burners area.展开更多
The theoretical framework of visual simulation in virtual reality is discussed. The new concept of visual image space is supposed. On the basis of visual image space, in visual perceptive sense, VR is considered as a ...The theoretical framework of visual simulation in virtual reality is discussed. The new concept of visual image space is supposed. On the basis of visual image space, in visual perceptive sense, VR is considered as a spatial simulation. The objective of the spatial simulation is to transform physical space to visual image space. Last, the prototype system, surveying & mapping virtual Reality (SMVR), is developed, and the space simulation above is realized. By use of SMVR, the real 3D representation, 3D visual analysis, virtual plan and designs can be implemented.展开更多
3D printing technology is an innovative manufacturing technology used in several disciplines, whose number and diversity are growing day by day. The development of devices to improve the accessibility of buildings an...3D printing technology is an innovative manufacturing technology used in several disciplines, whose number and diversity are growing day by day. The development of devices to improve the accessibility of buildings and urban spaces for people with disabilities through 3D priming technology is still not broadly explored. The present study is focused on filling this gap, with the realization of a tactile map of the MTE (Museum of Electrical Technology) of the University of Pavia (Italy) for blind and visually impaired people. The tactile map represents the building plan with all the information to guide the visit. The device is the result of a research process which is made by several steps and experimental tests, aimed at setting the best 3D priming profiles to meet all the requirements of the end-users. This paper describes methods and strategies applied to reach these goals: it underlines the social and technical approaches, the experimental phases and its possible future developments.展开更多
Solid–liquid phase equilibrium data for binary(L-arabinose–water) and(D-xylose–water) systems at temperatures from(269.85–298.05) K and ternary(L-arabinose–D-xylose–water) system at temperatures of 273.85 K,278....Solid–liquid phase equilibrium data for binary(L-arabinose–water) and(D-xylose–water) systems at temperatures from(269.85–298.05) K and ternary(L-arabinose–D-xylose–water) system at temperatures of 273.85 K,278.85 K and 284.45 K were measured at atmospheric pressure.The ternary phase diagrams of the systems were constructed on the base of the measured solubility.Two pure solid phases were formed at given temperatures,including pure L-arabinose and pure D-xylose,which were con firmed and determined by the method of Schreinemakers' wet residue.At the same temperature,the crystallization region of L-arabinose was larger than D-xylose's.The acquired solubility data were then correlated using the NRTL model,Wilson model and Xu model.The calculated solubility with the three models agreed well with the experimental values.展开更多
This paper uses Abductive network to predict global solar radiation in any location in the Kingdom of Saudi Arabia (KSA) based on sunshine duration, month number, latitude, longitude, and altitude of the location. R...This paper uses Abductive network to predict global solar radiation in any location in the Kingdom of Saudi Arabia (KSA) based on sunshine duration, month number, latitude, longitude, and altitude of the location. Results indicate good agreement between measured and predicted GSR values for each of the 35 locations with known GSR values. Finally, the data from all available stations are used to train an abductive network to estimate the GSR values anywhere in the Kingdom based on latitude and longitude. GSR values are estimated using the developed method at 25 additional locations throughout the kingdom and used with the measured data from the 35 available measurement stations to draw a comprehensive contour map of GSR values for KSA.展开更多
High speed data communication between digital signal processor and the host is required to meet the demand of most real-time systems. PCI bus technology is a solution of this problem. The principle of data communicati...High speed data communication between digital signal processor and the host is required to meet the demand of most real-time systems. PCI bus technology is a solution of this problem. The principle of data communication based on PCI has been explained. Meanwhile, the technology of data transfer between synchronous dynamic RAM(SDRAM) and an mapping space of on-chip memory(L2) by expansion direct memory access(EDMA) has also been realized.展开更多
In this paper the results of an experimental investigation, finalized to analyze the effect of roughness elements on the Oscillatory Boundary Layer (OBL), were presented and discussed. These experiments can be usefu...In this paper the results of an experimental investigation, finalized to analyze the effect of roughness elements on the Oscillatory Boundary Layer (OBL), were presented and discussed. These experiments can be useful for the characterization of the complex hydrodynamic mechanisms in coastal environment, where the bottom boundary layer is very often subject to momentum exchange processes due to the presence of macro-structures on the bottom able to strongly influence and modify its own structure. In this investigation, experiments were performed in an oscillating water tunnel, covering a range of frequencies to from 0.646 up to 2.319 rad.s^-1. The roughness elements were modelled by mean of a matrix of stiff cylinders arranged on the bottom of the tunnel and two densities of cylinders were considered, corresponding to low and high density respectively. Velocity measurements were obtained by 2C DPIV (2 Component Digital Particle Image Velocimetry) technique. A detailed visualization of the flow through adjacent cylinders, including scalar velocity maps and streamlines are presented. Furthermore phase-averaged velocity distributions are here provided. Moreover, root-mean-squared velocities are considered and an empirical relation between (1) the root-mean-squared velocities and the distance from the bottom; (2) the velocity attenuation coefficient and the Reynolds number is obtained for both the considered configurations.展开更多
In this paper, experimental results are reported about, especially, effect of turbulence in airflow-mixture in HVAC (heating, ventilating, air-conditioning) unit. A flow channel in this study has same characters as ...In this paper, experimental results are reported about, especially, effect of turbulence in airflow-mixture in HVAC (heating, ventilating, air-conditioning) unit. A flow channel in this study has same characters as actual HVAC unit, such as bent rectangular duct, a heater unit and a flow control door. The experiment was carried out to obtain verification data for analysis by using PIV (particle image velocimetry) system. Moreover, temperature map in the channel was also obtained by using thermocouples. Reynolds number is set to 12800. As a result of this study, representative velocity distributions and Reynolds stress distributions were obtained. It was found that stress value is quite high (maximum 1.4) by preliminary turbulence and mixture in the duct. In addition, it was also found that temperature diffusion is promoted by mixing around door.展开更多
基金National Natural Science Foundation of China(No.61302159,61227003,61301259)Natual Science Foundation of Shanxi Province(No.2012021011-2)+2 种基金Specialized Research Fund for the Doctoral Program of Higher Education,China(No.20121420110006)Top Science and Technology Innovation Teams of Higher Learning Institutions of Shanxi Province,ChinaProject Sponsored by Scientific Research for the Returned Overseas Chinese Scholars,Shanxi Province(No.2013-083)
文摘Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achieve a real-time image pro- cessing for the moving objects. Firstly, the median filtering, gain calibration, image segmentation, image binarization, cor- ner detection and edge fitting are employed to process the images of the moving objects to make the image close to the real object. Then, the processed images are simultaneously displayed on a real-time basis to make it easier to analyze, understand and identify them, and thus it reduces the computation complexity. Finally, human-computer interaction (HCI)-friendly in- terface based on VC ++ is designed to accomplish the digital logic transform, image processing and real-time display of the objects. The experiment shows that the proposed algorithm and software design have better real-time performance and accu- racy which can meet the industrial needs.
基金The National Natural Science Foundation of China, No. 30070235, 30470508The Natural Science Foundation of Hunan Province, No. 08JJ5043+1 种基金The Science and Technolgy Foundation of Hunan Province, No. 06FJ3120, 2007SK3072the Medical Science and Technology Foundation of Hunan Province, No. B2006-159
文摘AIM: To investigate dynamical and image pathological characteristics of the liver on magnetic resonance (MR) diffusion-weighted imaging (DWI) in the rabbit VX-2 tumor model. METHODS: Forty New Zealand rabbits were included in the study and VX-2 tumor piece was implanted intrahepatically. Fifteen animals received two intrahepatic implantations while 25 had one intrahepatical implantation. DWI, T1- and T2-weighted of magnetic resonance imaging (MRI) were carried out on the 7th and the 14th d after implantation and DWI was conducted, respectively on the 21th d. Ten VX-2 tumor samples were studied pathologically. RESULTS: The rate of lump detected by DWI, TlWI and T2WI was 78.7%, 10.7% and 53.5% (X^2 =32.61, P 〈 0.001) on the 7th d after implantation and 95.8%, 54.3% and 82.9% (X^2 = 21.50, P 〈 0.001) on the 14th d. The signal of most VX-2 tumors on DWI was uniform and it was equal diffusion coefficient (ADC). did not decrease on the 7th on the map of apparent The signal of VX tumors d after implantation, most of them slowly growing during the week following implantation without significant cell dying within the tumor. VX-2 tumors grew increasingly within 14 d after implantation but the signal of most VX-2 tumors on DWI or on the map of ADC was uniform or uneven and ADC of VX tumors decreased obscurely or slightly because tumor necrosis was still not obvious. On the 21th d after implantation, the signal of most VX-2 tumors on DWI or on the map of ADC was uneven because tumor necrosis was evident and ADC of VX-2 tumor necrotic areas decreased. The areas of viable cells in VX-2 tumors manifested a high signal on DWI and a low signal on the map of ADC. The areas of dead cells or necrosis in VX-2 tumors manifested low signals on DWI and low, equal or high signals on the map of ADC but they manifested high signals on DWI and on the map of ADC at the same time when the areas of necrotic tumor became liquefied or cystic. The border of tumors on DWI appeared gradually distinct and internal signals of tumor became progressively uneven. CONCLUSION: The manifestations of viable, necrotic and liquefied or cystic areas in VX-2 tumors on DWI are typical and DWI is of significant and potential values in clinical application in both the early detection and diagnosis of liver tumors.
基金National Natural Science Foundation Grant No.60072029
文摘A new real-time algorithm is proposed in this paperfor detecting moving object in color image sequencestaken from stationary cameras.This algorithm combines a temporal difference with an adaptive background subtraction where the combination is novel.Ⅷ1en changes OCCUr.the background is automatically adapted to suit the new conditions.Forthe background model,a new model is proposed with each frame decomposed into regions and the model is based not only upon single pixel but also on the characteristic of a region.The hybrid presentationincludes a model for single pixel information and a model for the pixel’s neighboring area information.This new model of background can both improve the accuracy of segmentation due to that spatialinformation is taken into account and salientl5r speed up the processing procedure because porlion of neighboring pixel call be selected into modeling.The algorithm was successfully used in a video surveillance systern and the experiment result showsit call obtain a clearer foreground than the singleframe difference or background subtraction method.
基金Supported by the National Natural Science Foundation of China(Nos.31072246,31272703)
文摘Flume experiments and numerical simulation were conducted to characterize the hydrodynamics of a trapezoid artificial reef.Measurements in particle image velocimetry were conducted to observe the formation of upwelling and vortices;and forces for the reef model were measured by load cell.The results of flume experiments agree well with the numerical data.In addition,the flow structure around a reef combining trapezoidal and cubic blocks was simulated numerically under two deployment schemes,showing a more complicated flow structure than that of a stand-alone reef.Relationship between drag coefficient and Reynolds number suggest that the degree of turbulence can be assessed from the value of drag coefficient downstream from the reef.The role of the reef in water flow is to reduce flow velocity and generate turbulence.
基金Supported by National Natural Science Foundation of China (No. 50935003)
文摘Based on microscope and image processing, a new method of auto tool setting for micro milling was presented. Firstly, a realtime image of tool setting area was obtained by microscope and CCD camera, then image processing was carried out on this image and the gap between the tool and workpiece was calculated. The gap measurement was sent to motion controlling card to make the tool approach to the surface of workpiece. These steps were repeated until the gap is zero, which means that tool setting was finished. Moreover, a reliability verification test was conducted. Results indicated that the precision of tool setting is satisfactory.
基金supported by the Zhejiang Provincial Natural Science Foundation of China under Grant No. LY14E090009State Key Laboratory of Satellite Ocean Environment Dynamics (Second Institute of Oceanography, SOA), State Key Laboratory of Fluid Power Transmission and Control (GZKF-201310)+1 种基金State Key Laboratory of Ocean Engineering, China. The National Research Foundation of Singapore (NRF-CRP5-2009-01)Maritime Research Centre and Nanyang Environment and Water Research Institute, Nanyang Technological University, Singapore, is acknowledged
文摘In this paper, flow around two circular cylinders in tandem arrangement with unequal diameters has been investigated using the particle image velocimetry technique(PIV) in a water channel. The upstream to downstream diameter ratio was kept constant at d/D = 2/3, the centre-to-centre distance was varied from 1.2D to 5D and the Reynolds number was varied from 1200 to 4800. The flow characteristics were analyzed through ensemble-averaged patterns of velocity, vorticity, normalized Reynolds stress contours and streamlines. Based on ensemble-averaged and instantaneous flow fields, different flow patterns, including single-wakeshedding at small spacing ratio, bi-stable flow behavior(alternating behavior of reattachment and vortex shedding) at intermediate spacing ratio and co-shedding pattern at large spacing ratio were observed. The effects of Reynolds number and the centre-to-centre spacing ratio on flow patterns and turbulent characteristics were also investigated. It was found that the diameter ratio appears to have a certain effect on the flow patterns at intermediate spacing ratios, where the reattachment of shear layer depends on the lateral width of the wake flow in the lee of the upstream cylinder. Extensive discussion on the distributions of Reynolds stress and turbulent kinetic energy was presented.
基金supported by SystemIC 2010 Project(No.10030518),the MKE(Ministry of Knowledge Economy,Korea)
文摘The paper Proposes a colorfulness enhancement of pictorial images using image classifier based on chroma histogram. This approach firstly estimates strength of colorfulness of images and their types. With such determined infomation, the algorithm automatical- ly adjusts image colorfulness for a better natural image look. With the help of an additional detection of skin colors and a pixel chroma adaptive local processing, the algodtlan produces more natural image look. The algorithm perfomance had been tested with an image quality judgment experiment of 20 persons. The experimental result indicates a better image preference.
文摘The combustion condition in coal-fired furnaces of the large power station boiler is very complex and the flame emissivity is one of the important combustion parameters. A measurement method of the flame emissivity based on the blackbody furnace calibration of CCD (Charge Coupled Device) cameras and the color image processing techniques of computer was introduced. The experimental research on the flame emissivity in a 200 MW boiler furnace and a 300 MW boiler furnace was conducted respectively through the several CCD cameras installed at different height in furnace. The measurement results show: the flame emissivity increases with the increase of the unit load, the flame emissivity of the burner areas in furnace is the highest and the flame emissivity decrease with the increase of height of furnace above the burners area.
文摘The theoretical framework of visual simulation in virtual reality is discussed. The new concept of visual image space is supposed. On the basis of visual image space, in visual perceptive sense, VR is considered as a spatial simulation. The objective of the spatial simulation is to transform physical space to visual image space. Last, the prototype system, surveying & mapping virtual Reality (SMVR), is developed, and the space simulation above is realized. By use of SMVR, the real 3D representation, 3D visual analysis, virtual plan and designs can be implemented.
文摘3D printing technology is an innovative manufacturing technology used in several disciplines, whose number and diversity are growing day by day. The development of devices to improve the accessibility of buildings and urban spaces for people with disabilities through 3D priming technology is still not broadly explored. The present study is focused on filling this gap, with the realization of a tactile map of the MTE (Museum of Electrical Technology) of the University of Pavia (Italy) for blind and visually impaired people. The tactile map represents the building plan with all the information to guide the visit. The device is the result of a research process which is made by several steps and experimental tests, aimed at setting the best 3D priming profiles to meet all the requirements of the end-users. This paper describes methods and strategies applied to reach these goals: it underlines the social and technical approaches, the experimental phases and its possible future developments.
基金Supported by the National Natural Science Foundation of China(21376231)
文摘Solid–liquid phase equilibrium data for binary(L-arabinose–water) and(D-xylose–water) systems at temperatures from(269.85–298.05) K and ternary(L-arabinose–D-xylose–water) system at temperatures of 273.85 K,278.85 K and 284.45 K were measured at atmospheric pressure.The ternary phase diagrams of the systems were constructed on the base of the measured solubility.Two pure solid phases were formed at given temperatures,including pure L-arabinose and pure D-xylose,which were con firmed and determined by the method of Schreinemakers' wet residue.At the same temperature,the crystallization region of L-arabinose was larger than D-xylose's.The acquired solubility data were then correlated using the NRTL model,Wilson model and Xu model.The calculated solubility with the three models agreed well with the experimental values.
文摘This paper uses Abductive network to predict global solar radiation in any location in the Kingdom of Saudi Arabia (KSA) based on sunshine duration, month number, latitude, longitude, and altitude of the location. Results indicate good agreement between measured and predicted GSR values for each of the 35 locations with known GSR values. Finally, the data from all available stations are used to train an abductive network to estimate the GSR values anywhere in the Kingdom based on latitude and longitude. GSR values are estimated using the developed method at 25 additional locations throughout the kingdom and used with the measured data from the 35 available measurement stations to draw a comprehensive contour map of GSR values for KSA.
文摘High speed data communication between digital signal processor and the host is required to meet the demand of most real-time systems. PCI bus technology is a solution of this problem. The principle of data communication based on PCI has been explained. Meanwhile, the technology of data transfer between synchronous dynamic RAM(SDRAM) and an mapping space of on-chip memory(L2) by expansion direct memory access(EDMA) has also been realized.
文摘In this paper the results of an experimental investigation, finalized to analyze the effect of roughness elements on the Oscillatory Boundary Layer (OBL), were presented and discussed. These experiments can be useful for the characterization of the complex hydrodynamic mechanisms in coastal environment, where the bottom boundary layer is very often subject to momentum exchange processes due to the presence of macro-structures on the bottom able to strongly influence and modify its own structure. In this investigation, experiments were performed in an oscillating water tunnel, covering a range of frequencies to from 0.646 up to 2.319 rad.s^-1. The roughness elements were modelled by mean of a matrix of stiff cylinders arranged on the bottom of the tunnel and two densities of cylinders were considered, corresponding to low and high density respectively. Velocity measurements were obtained by 2C DPIV (2 Component Digital Particle Image Velocimetry) technique. A detailed visualization of the flow through adjacent cylinders, including scalar velocity maps and streamlines are presented. Furthermore phase-averaged velocity distributions are here provided. Moreover, root-mean-squared velocities are considered and an empirical relation between (1) the root-mean-squared velocities and the distance from the bottom; (2) the velocity attenuation coefficient and the Reynolds number is obtained for both the considered configurations.
文摘In this paper, experimental results are reported about, especially, effect of turbulence in airflow-mixture in HVAC (heating, ventilating, air-conditioning) unit. A flow channel in this study has same characters as actual HVAC unit, such as bent rectangular duct, a heater unit and a flow control door. The experiment was carried out to obtain verification data for analysis by using PIV (particle image velocimetry) system. Moreover, temperature map in the channel was also obtained by using thermocouples. Reynolds number is set to 12800. As a result of this study, representative velocity distributions and Reynolds stress distributions were obtained. It was found that stress value is quite high (maximum 1.4) by preliminary turbulence and mixture in the duct. In addition, it was also found that temperature diffusion is promoted by mixing around door.