期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
矿井通风热阻力数值模拟研究 被引量:6
1
作者 周闯 刘剑 +1 位作者 耿萌 王东 《中国安全生产科学技术》 CAS CSCD 北大核心 2019年第10期25-31,共7页
矿井风流流经井下热水、干热岩、火灾地点等局部高温区域时,风流吸收热量使其内能增加,高温风流在巷道内流动时会产生热阻力。针对如何确定井下风流加热流动时巷道内热阻力的实测范围这一问题,通过理论推导与数值模拟的方法对巷道内热... 矿井风流流经井下热水、干热岩、火灾地点等局部高温区域时,风流吸收热量使其内能增加,高温风流在巷道内流动时会产生热阻力。针对如何确定井下风流加热流动时巷道内热阻力的实测范围这一问题,通过理论推导与数值模拟的方法对巷道内热阻力分布情况进行分析。由压力场的模拟结果得出风流加热流动时,所产生的热阻力不仅存在于加热区,高温风流向加热区下风侧流动时热阻力仍然存在。模拟结果表明:对于水平等截面管道,风流流经加热区时,风流速压增加,加热区内风流的静压降幅大于全压降幅;流出加热区的风流向管道出口处流动时,高温风流不断克服阻力做功,并与管道内的新鲜风流、壁面进行热交换,风流温度逐渐下降,当测定区间为加热区入口至模拟管道出口时,风流的静压降幅与全压降幅近似相等。研究结果对井下巷道、隧道及实际工程应用中热阻力的分析与研究都具有重要价值。 展开更多
关键词 矿井风流 热阻力 数值模拟 局部高温 实测范围
下载PDF
Further Considerations of 100Gbit/s Wavelength Division Multiplexing System Commercial Application
2
作者 沈世奎 王光全 +1 位作者 王海军 满祥锟 《China Communications》 SCIE CSCD 2013年第4期1-6,共6页
Along with the emergence and ma- turity of 100Gbit/s technologies, numbers of trial and commercial 100Gbit/s Wavelength Division Multiplexing (WDM) systems have been established worldwide. The research- oriented lab... Along with the emergence and ma- turity of 100Gbit/s technologies, numbers of trial and commercial 100Gbit/s Wavelength Division Multiplexing (WDM) systems have been established worldwide. The research- oriented lab tests of 100Gbit/s WDM systems were done by China Unicorn in 2012. The 100Gbit/s technologies of polarization multi- plex-quadrature phase shift keying with co- herent detection from multiple vendors have been studied. There are some further issues to be specified before the commercial application of 100Gbit/s WDM system is implemented in large scale in backbone network, including optical pertbnnance parameters, optical per- lbrmance monitoring of 100Gbit/s system, protection mechanism, selection of client in- terfhce and comprehensive Operation, Ad- ministration and Maintenance (OAM). 展开更多
关键词 100Gbit/s WDM system opticalperformance monitoring client interface pro-tection mechanism comprehensive OAM
下载PDF
Study on dryout point and heat transfer in subcooled flow boiling through vertical narrow annular channels
3
作者 DING Guo-zhong HUANG Su-yi SU Shun-yu LI Jia HU Xing-hua 《Journal of Energy and Power Engineering》 2007年第1期15-21,共7页
The purpose of this study is to conduct the dryout point and heat transfer correlation for subcooled boiling flow in narrow annuli. First, the dryout point of subcooled flow boiling of water was measured in narrow ann... The purpose of this study is to conduct the dryout point and heat transfer correlation for subcooled boiling flow in narrow annuli. First, the dryout point of subcooled flow boiling of water was measured in narrow annular channels under the working condition of pressure ranging from 0.1 to 0.3 MPa and low mass flow rate from 6 to 60 kgm^-2 s^-1. Experimental test channels were annular and heated bilaterally with the channel gap of lmm and 1.5mm, and heated length of 1500mm.The location of the dryout was observed and measured by experiment with investigating the various system parameter effects on dryout point, and the results show that the location of dryout point is basically stable and repeating and the heat transfer coefficient increased with heat flux, mass flux and pressure, however, decreases with the gap size. Next, new correlations of CHF and critical vapor quality for narrow annular channels was proposed and calculation results shown a good agreement with the experimental data. 展开更多
关键词 dryout point heat transfer subcooled flow boiling narrow annular channels
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部