On the basis of analyzing the influencing factors and harmfulness of stray current, and discussing the existing problems of monitoring and prevention system for stray current, the integrated monitoring and prevention ...On the basis of analyzing the influencing factors and harmfulness of stray current, and discussing the existing problems of monitoring and prevention system for stray current, the integrated monitoring and prevention system for stray current in metro was developed. A net system of distributed computers for monitoring was set up. It can monitor the distribution of stray current in metro and the corrosion of the metal structure in the whole line. According to the situation of monitoring it can also control the drainage of its tank to reach the best effect and eliminate the negative effect of polarity drainage. By using the new type unilateral electric device, the problem of burning the rail by electric arc can be avoided. The unilateral electric device can be connected with the monitoring net system directly to realize the monitor in line and improve the reliability of the device.展开更多
N2O represents a popular oxidizer for hybrid rocket motors for a variety of reasons, including safety, ease of access and self-pressurization. It is often used as a saturated two-phase fluid in these applications to t...N2O represents a popular oxidizer for hybrid rocket motors for a variety of reasons, including safety, ease of access and self-pressurization. It is often used as a saturated two-phase fluid in these applications to take advantage of self-pressurization. Recent interest in using this oxidizer in regeneratively cooled engines requires a detailed heat transfer process analysis to the coolant, in order to quantify performance. Since the injection of N2O typically takes place in the two-phase region, our study focuses on heat transfer rates in this region, and extends the region to include superheated vapor. This analysis is critical for these cooling applications, because the exothermic decomposition nature of N2O also means that unchecked heating in the superheated region may result in a runaway reaction in the cooling passages. Furthermore, provided that sufficient heat transfer rates are available, N2O is expected to accelerate in the cooling passages due to Rayleigh flow effects much like those of a calorically perfect gas. The proximity of superheated N2O to its saturated vapor curve, at the conditions studied here, makes the suitability of a perfect gas model questionable, but that benchmarks is still useful. This paper presents the development of an experimental apparatus （a ＂Rayleigh tube＂）, specifically designed to study this problem, and test the analytical methods developed to model it. Since we focus on the development of the apparatus, the data presented were uses primarily calorically perfect gas surrogates, but the goal is to apply the apparatus and method to N2O. The design and construction of the Rayleigh tube is presented, along with preliminary results with perfect gases. Finally, we present preliminary results on heated N2O flow. Using a simple model for predicted dry-out point, we investigate where superheating may be expected to occur. We present estimates of critical heating and compare them to the heat required to achieve self-decomposition.展开更多
MHPPs （micro hydro power plants） have become prominent in hydropower plants as a solution to provide the energy demands of the grid. In this study, a new hybrid renewable energy based DC excitation system for synchr...MHPPs （micro hydro power plants） have become prominent in hydropower plants as a solution to provide the energy demands of the grid. In this study, a new hybrid renewable energy based DC excitation system for synchronous generator in the developed MHPP system is introduced. Proposed hybrid DC excitation system consists of solar ＆ hydrogen energy based power generating systems. Hybrid renewable energy based system is used for the excitation of the synchronous generator in the MHPP test system. The renewables are used as a secondary energy source to provide the excitation current to a synchronous generator that generates energy in MHPP. A PV （photovoltaic） array is used as the main source of excitation, and a FC （fuel cell） stack is used for DC excitation in the lack of sunshine. In the experimental setup, an electrical control card is developed, and a microcontroller is used to perform the proposed excitation system. All experimental results obtained from 5 kW rated power MHHP test system. Experimental results show that, the proposed method provides the continuous excitation current, and the operation of the synchronous generator is uninterrupted. The proposed method is also practical and easily implemented for MHPP systems.展开更多
In this study, in order to investigate the power consumption of feed drive system, mathematical models for the single-axis experimental apparatus are developed. This apparatus can be driven by either of ball screw or ...In this study, in order to investigate the power consumption of feed drive system, mathematical models for the single-axis experimental apparatus are developed. This apparatus can be driven by either of ball screw or linear motor and it is possible to change the mechanical properties of such as grease viscosity of the table. Then, the power consumption is simulated by proposed method based on the mathematical model of feed drive systems and the simulated results are compared with the measured results of the experimental apparatus to confirm the validity of the proposed method. In addition, it is clarified that the energy usages of the feed drive system. The energy losses of the feed drive system are divided into the loss of each part and these energy losses are calculated by the proposed method. Then, it is investigated that the influence of the velocity and friction to the energy consumption of feed drive system. As the results, it is confirmed that proposed method can accurately predict the power consumption of the ball-screw feed drive system. It is also clarified that the energy usage for both of ball-screw and linear motor drive systems.展开更多
There has not been an effective method to measure the resistivity of small-size sample of mineral and solid insulating material until now.According to the Chinese National Standard(GB/T1410-2006) and features of digit...There has not been an effective method to measure the resistivity of small-size sample of mineral and solid insulating material until now.According to the Chinese National Standard(GB/T1410-2006) and features of digital high resistance meter,a small electrode experimental installation was developed;it can work with current high resistance meter;the sample decreases to 18 mm from standard size 100 mm in diameter and reduces by 30.86 times in area.A three-electrode system is supported and precisely positioned by two insulating bases whose diameter is 60 mm and height is 20 mm,which ensures accuracy of device structure and reliability of measuring results.The key technological parameters are as follows:diameter of high voltage electrode is 18mm;diameter of measuring electrode is 14.6 mm;internal diameter and external diameter of guard electrode are 16 and 18 mm,respectively;the gap between guard electrode and measuring electrode is set at 0.6 mm.These parameters are adequate for the measurement of flat specimen of mineral and solid insulating material whose diameter is 18 mm.According to the confirmatory experiment on the volume resistivity and surface resistivity,the measuring results are almost the same,using a small electrode experimental installation and a standard electrode.展开更多
Superplastic alloy has very strong structure sensitivity. Superplastic bulging with a die of the plate is related not only to stress state but also closely to loading paths. It is an important basis for bulging formin...Superplastic alloy has very strong structure sensitivity. Superplastic bulging with a die of the plate is related not only to stress state but also closely to loading paths. It is an important basis for bulging forming with a die to study deformation law and experimental apparatus for superplastic free bulging, because the boundary of test piece is fixed and friction is insignificant for free bulging. In the paper, a pure high-pressure argon gas source is used as the loading media after it is heated by the heating system outside the furnace, which improves the heating efficiency and temperature uniformity of the test piece. The photoelectric non-contact measurement device can avoid negative influence on the additional stress and uneven temperature at the peak of bulging part caused by push rod in the contact measurement. The temperature and pressure of the test piece in cylindrical insulation furnace with blank holder give feedback control to improve the control precision. In loading gas channels, the pressure is adjusted by accurately measuring and controlling the rotation angle of the stepping motor, and is loaded by an electro-magnetic valve. It significantly increases the response characteristics of the control pressure. This paper also introduces steps and methods to realize several typical loading paths, such as constant pressure, jump pressure and additional back & differential pressure loading. These provide a new way to measure the strain rate sensitivity index m value and improve the deformation speed of superplastic free bulging.展开更多
文摘On the basis of analyzing the influencing factors and harmfulness of stray current, and discussing the existing problems of monitoring and prevention system for stray current, the integrated monitoring and prevention system for stray current in metro was developed. A net system of distributed computers for monitoring was set up. It can monitor the distribution of stray current in metro and the corrosion of the metal structure in the whole line. According to the situation of monitoring it can also control the drainage of its tank to reach the best effect and eliminate the negative effect of polarity drainage. By using the new type unilateral electric device, the problem of burning the rail by electric arc can be avoided. The unilateral electric device can be connected with the monitoring net system directly to realize the monitor in line and improve the reliability of the device.
文摘N2O represents a popular oxidizer for hybrid rocket motors for a variety of reasons, including safety, ease of access and self-pressurization. It is often used as a saturated two-phase fluid in these applications to take advantage of self-pressurization. Recent interest in using this oxidizer in regeneratively cooled engines requires a detailed heat transfer process analysis to the coolant, in order to quantify performance. Since the injection of N2O typically takes place in the two-phase region, our study focuses on heat transfer rates in this region, and extends the region to include superheated vapor. This analysis is critical for these cooling applications, because the exothermic decomposition nature of N2O also means that unchecked heating in the superheated region may result in a runaway reaction in the cooling passages. Furthermore, provided that sufficient heat transfer rates are available, N2O is expected to accelerate in the cooling passages due to Rayleigh flow effects much like those of a calorically perfect gas. The proximity of superheated N2O to its saturated vapor curve, at the conditions studied here, makes the suitability of a perfect gas model questionable, but that benchmarks is still useful. This paper presents the development of an experimental apparatus （a ＂Rayleigh tube＂）, specifically designed to study this problem, and test the analytical methods developed to model it. Since we focus on the development of the apparatus, the data presented were uses primarily calorically perfect gas surrogates, but the goal is to apply the apparatus and method to N2O. The design and construction of the Rayleigh tube is presented, along with preliminary results with perfect gases. Finally, we present preliminary results on heated N2O flow. Using a simple model for predicted dry-out point, we investigate where superheating may be expected to occur. We present estimates of critical heating and compare them to the heat required to achieve self-decomposition.
文摘MHPPs （micro hydro power plants） have become prominent in hydropower plants as a solution to provide the energy demands of the grid. In this study, a new hybrid renewable energy based DC excitation system for synchronous generator in the developed MHPP system is introduced. Proposed hybrid DC excitation system consists of solar ＆ hydrogen energy based power generating systems. Hybrid renewable energy based system is used for the excitation of the synchronous generator in the MHPP test system. The renewables are used as a secondary energy source to provide the excitation current to a synchronous generator that generates energy in MHPP. A PV （photovoltaic） array is used as the main source of excitation, and a FC （fuel cell） stack is used for DC excitation in the lack of sunshine. In the experimental setup, an electrical control card is developed, and a microcontroller is used to perform the proposed excitation system. All experimental results obtained from 5 kW rated power MHHP test system. Experimental results show that, the proposed method provides the continuous excitation current, and the operation of the synchronous generator is uninterrupted. The proposed method is also practical and easily implemented for MHPP systems.
文摘In this study, in order to investigate the power consumption of feed drive system, mathematical models for the single-axis experimental apparatus are developed. This apparatus can be driven by either of ball screw or linear motor and it is possible to change the mechanical properties of such as grease viscosity of the table. Then, the power consumption is simulated by proposed method based on the mathematical model of feed drive systems and the simulated results are compared with the measured results of the experimental apparatus to confirm the validity of the proposed method. In addition, it is clarified that the energy usages of the feed drive system. The energy losses of the feed drive system are divided into the loss of each part and these energy losses are calculated by the proposed method. Then, it is investigated that the influence of the velocity and friction to the energy consumption of feed drive system. As the results, it is confirmed that proposed method can accurately predict the power consumption of the ball-screw feed drive system. It is also clarified that the energy usage for both of ball-screw and linear motor drive systems.
基金supported by the National Natural Science Foundation of China (Grant No. 50974025)the National Key Technologies R & D Program of China (Grant No. 2004BA810B02)+2 种基金the Applied Foundation of Basic Research in Sichuan Province (Grant No. 07JY029-029)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20095122110015)the Scientific Research Foundation of the Education Ministry for Returned Chinese Scholars, China (Grant No. 2010-32)
文摘There has not been an effective method to measure the resistivity of small-size sample of mineral and solid insulating material until now.According to the Chinese National Standard(GB/T1410-2006) and features of digital high resistance meter,a small electrode experimental installation was developed;it can work with current high resistance meter;the sample decreases to 18 mm from standard size 100 mm in diameter and reduces by 30.86 times in area.A three-electrode system is supported and precisely positioned by two insulating bases whose diameter is 60 mm and height is 20 mm,which ensures accuracy of device structure and reliability of measuring results.The key technological parameters are as follows:diameter of high voltage electrode is 18mm;diameter of measuring electrode is 14.6 mm;internal diameter and external diameter of guard electrode are 16 and 18 mm,respectively;the gap between guard electrode and measuring electrode is set at 0.6 mm.These parameters are adequate for the measurement of flat specimen of mineral and solid insulating material whose diameter is 18 mm.According to the confirmatory experiment on the volume resistivity and surface resistivity,the measuring results are almost the same,using a small electrode experimental installation and a standard electrode.
基金supported by the Natural Science Foundation of Jilin Province (Grant No. 201115015)the National Natural Science Foundation of China (Grant No. 51005099)
文摘Superplastic alloy has very strong structure sensitivity. Superplastic bulging with a die of the plate is related not only to stress state but also closely to loading paths. It is an important basis for bulging forming with a die to study deformation law and experimental apparatus for superplastic free bulging, because the boundary of test piece is fixed and friction is insignificant for free bulging. In the paper, a pure high-pressure argon gas source is used as the loading media after it is heated by the heating system outside the furnace, which improves the heating efficiency and temperature uniformity of the test piece. The photoelectric non-contact measurement device can avoid negative influence on the additional stress and uneven temperature at the peak of bulging part caused by push rod in the contact measurement. The temperature and pressure of the test piece in cylindrical insulation furnace with blank holder give feedback control to improve the control precision. In loading gas channels, the pressure is adjusted by accurately measuring and controlling the rotation angle of the stepping motor, and is loaded by an electro-magnetic valve. It significantly increases the response characteristics of the control pressure. This paper also introduces steps and methods to realize several typical loading paths, such as constant pressure, jump pressure and additional back & differential pressure loading. These provide a new way to measure the strain rate sensitivity index m value and improve the deformation speed of superplastic free bulging.
