Integrated identification method of rheological model of sandstone in Sanmenxia bauxite

Based on the uniaxial compression creep experiments conducted on bauxite sandstone obtained from Sanmenxia,typical creep experiment curves were obtained.From the characteristics of strain component of creep curves,the creep strain is composed of instantaneous elastic strain,ε（me）,instantaneous plastic strain,ε（mp）,viscoelastic strain,ε（ce）,and viscoplastic strain,ε（cp）.Based on the characteristics of instantaneous plastic strain,a new element of instantaneous plastic rheology was introduced,instantaneous plastic modulus was defined,and the modified Burgers model was established.Then identification of direct screening method in this model was completed.According to the mechanical properties of rheological elements,one- and three-dimensional creep equations in different stress levels were obtained.One-dimensional model parameters were identified by the method of least squares,and in the process of computation,Gauss-Newton iteration method was applied.Finally,by fitting the experimental curves,the correctness of direct method model was verified,then the examination of posterior exclusive method of the model was accomplished.The results showed that in the improved Burgers models,the rheological characteristics of sandstone are embodied properly,microscopic analysis of creep curves is also achieved,and the correctness of comprehensive identification method of rheological model is verified.

Numerical simulation and experimental study of the hydrodynamics of a modeled reef located within a current

The hydrodynamic forces and flow field of artificial reef models in steady flow were numerically investigated using the RNG κ-ε turbulent model. The numerical simulation results are consistent with results observed by experimental means. A comparative study indicates that the corresponding errors of forces between calculated values and values observed in the experiment vary in the range of2.3%-11.2% and that the corresponding errors of velocities vary in the range of 1.3%-15.8%. The flow field numerical results show that upstream and vortices exist when the current passes over and through the surface of the reef model. This study suggests that the numerical simulation method can be applied to predict the forces and flow field associated with artificial reefs.

Experiment and numerical simulation of two-phase flow in oxygen enriched side-blown furnace

Taking an oxygen enriched side-blown furnace as the prototype,a hydraulic model was established according to the similarity principle.The influence of three factors on the gas-liquid two-phase flow was analyzed,i.e.the airflow speed,the submerged depth and the downward angle of the nozzle.A numerical simulation of the hydraulic model was carried out trying to find the suitable turbulence model which can describe the side-blown two-phase flow correctly by comparing the simulation results with the experimental data.The experiment shows that the airflow speed has a great influence on the flow of the water.The submerged depth of the nozzle has a relatively smaller influence on the penetration depth and the surface fluctuation height in the liquid phase.When the nozzle is at a downward angle of 15°,the penetration depth and the surface fluctuation height are reduced.It is concluded that the numerical results with the realizable k-εturbulence model are the closest to the experiment for the penetration depth,the surface fluctuation height and the bubble scale.

Early warning model for slope debris flow initiation

Early warning model of debris flow is important for providing local residents with reliable and accurate warning information to escape from debris flow hazards. This research studied the debris flow initiation in the Yindongzi gully in Dujiangyan City, Sichuan province, China with scaled-down model experiments. We set rainfall intensity and slope angle as dominating parameters and carried out 20 scaled-down model tests under artificial rainfall conditions. The experiments set four slope angles(32°, 34°, 37°, 42°) and five rainfall intensities(60 mm/h, 90 mm/h, 120 mm/h, 150 mm/h, and 180 mm/h) treatments. The characteristic variables in the experiments, such as, rainfall duration, pore water pressure, moisture content, surface inclination, and volume were monitored. The experimental results revealed the failure mode of loose slope material and the process of slope debris flow initiation, as well as the relationship between the surface deformation and the physical parameters of experimental model. A traditional rainfall intensity-duration early warning model(I-D model) was firstly established by using a mathematical regression analysis, and it was then improved into ISD model and ISM model(Here, I is rainfall Intensity, S is Slope angle, D is rainfall Duration, and M is Moisture content). The warning model can provide reliable early warning of slope debris flow initiation.

Simulated Heat Sink in the Southern Ocean and Its Contribution to the Recent Hiatus Decade

A set of numerical experiments is designed and carried out to understand a heat sink in the Southern Ocean in the recent hiatus decade. By using an oceanic general circulation model, the authors focus on the contributions from two types of forcing: wind stress and thermohaline forcing. The simulated results show that the heat sink in the upper Southern Ocean comes mainly from thermohaline forcing; while in the deeper layers, wind stress forcing also plays an important role. These different contributions may be due to different physical processes for the heat budget. The combination of these two types of forcing shows a significant heat sink in the Southern Ocean in the recent hiatus decade, and this is consistent with the observations and conclusions of a similar recently published study.

Experimental Verification of Model for Liquid-Cooled Staggered Pin Fin Heat Sinks with Top Bypass Flow

Pressure drops and heat transfer over staggered pin fin heat sinks with top bypass flow were experimentally evaluated. The authors considered liquid-cooling applications because there were few data available comparing to air-cooling applications. Empirical equations to predict heat transfer on the endwall were developed by obtaining experimental data on the copper base plate with acrylic pins. A new model for predicting pressure drops and heat transfer over staggered pin fin heat sinks with top bypass flow based on mass, momentum, and energy conservation within the two control volumes is proposed. The first control volume in the model is located within the finned area, and the second is located in the gap between the tip of the pins and the flow channel. This model combines two conditions according to the boundary-layer thickness. A comparison between experimental and calculated results revealed that dimensionless pressure drops and the Nusselt number could be predicted within 30% error for the former and 50% error for the latter.

Flow over Broad Crested Weirs： Comparison of 2D and 3D Models

The flow over broad-crested weirs was simulated by computational fluid dynamic model. The water surface profile over broad crested weir was measured in a laboratory model and validated using two and three dimensional Fluent programs. The Reynolds Averaged Navier-Stokes equations coupled with the turbulent standard （k-ε） model and volume of fluid method were applied to estimate the water surface profile. The results of numerical model were compared with experimental results to evaluate the ability of model in describing the behaviour of water surface profile over the weir. The results indicated that the 3D required more time in comparison with 2D results and the flow over weir changed from subcritical flow at the upstream （U/S） face of weir to critical flow over the crest and to supercritical flow at downstream （D/S）. A reasonable agreement was noticed between numerical results and experimental observations with mean error less than 2 %.

The Spatial Patterns of Initial Errors Related to the “Winter Predictability Barrier” of the Indian Ocean Dipole

In this study, using the Geophysical Fluid Dynamics Laboratory Climate Model version 2pl （GFDL CM2pl） coupled model, the winter predictability barrier （WPB） is found to exist in the model not only in the growing phase but also the Indian Ocean dipole （IOD） decaying phase of positive events due to the effect of initial errors. In particular, the WPB is stronger in the growing phase than in the decaying phase. These results indicate that initial errors can cause the WPB. The domi- nant patterns of the initial errors that cause the occurrence of the WPB often present an eastern-western dipole both in the surface and subsurface temperature components. These initial errors tend to concentrate in a few areas, and these areas may represent the sensitive areas of the predictions of positive IOD events. By increasing observations over these areas and eliminating initial errors here, the WPB phenomenon may be largely weakened and the forecast skill greatly improved.

Three-dimensional simulation of interfacial convection in CO_2–ethanol system by hybrid lattice Boltzmann method with experimental validation

By using a hybrid lattice-Boltzmann–finite-difference method(hybrid LBM–FDM method),three-dimensional simulations of solutal interfacial convection were conducted for the process of CO2absorption into ethanol.A self-renewal interface model is adopted as an interfacial perturbation model.The simulation results revealed some three-dimensional features of the induced interfacial convection,such as the development of diverging cellular flow and Rayleigh plume-like convection in liquid phase.The concentration distribution of the simulation result is validated and found to be in well agreement with the Schlieren visualization results qualitatively.Additionally,the mass transfer enhancements by interfacial convection were investigated via both simulation and experiment for the absorption process,and the mass transfer is shown to be enhanced by the interfacial convection by about two-fold comparing with that by diffusion.

Effects of Atomic Mixing in Inertial Confinement Fusion by Multifluid Interpenetration Mix Model

The effects of atomic-level rnixing are systemically investigated in a multifluid interpenetration mix model ,and results are compared with the single-fluid model＇s simulations and experimental data. It is shown that increasing the model free parameter α, shock Mach number, and the initial density discontinuity makes the mix length and fraction of mixing particle increase, resulting in the lower shock temperatures compared with the results of single-fluid model without mixing. Recent high-compressibility direct-drive spherical implosions on OMEGA are simulated by the interpenetration mix modal. The calculations with atomic mixing between fuel and shell match quite well with the observations. Without considering any mixing, the calculated neutron yields and ion temperatures are overpredicted; while inclusion of the interpenetration mix model with the adjustable parameter α could fit the simulated neutron yields and ion temperatures well with experimental data.

Arctic Oscillation Responses to Black Carbon Aerosols Emitted from Major Regions

The responses of the Arctic Oscillation(AO) to global black carbon(BC) and BC emitted from major regions were compared using the atmospheric general circulation model Geophysical Fluid Dynamics Laboratory(GFDL) atmospheric general circulation model(AGCM) Atmospheric Model version 2.1(AM2.1). The results indicated that global BC could induce positive-phase AO responses, characterized by negative responses over the polar cap on 500 h Pa height fields, and zonal mean sea level pressure(SLP) decreasing while zonal wind increasing at 60°, with the opposite responses over midlatitudes. The AO indices distribution also shifted towards positive values. East Asian BC had similar impacts to that of global BC, while the responses to European BC were of opposite sign. South Asian BC and North American BC did not affect the AO significantly. Based on a simple linear assumption, we roughly estimated that the global BC emission increase could explain approximately 5% of the observed positive AO trend of +0.32 per decade during 1960 to 2000.

Tropical Pacific Decadal Variability in Subsurface Temperature

The nature decadal variability of the equatorial Pacific subsurface temperature is examined in the control simulation with the Geophysical Fluid Dynamics Laboratory coupled model CM2.1.The dominant mode of the subsurface temperature variations in the equator Pacific features a 20-40 year period and is North-South asymmetric about the equator.Decadal variations of the thermocline are most pronounced in the southwest of the Tropical Pacific.Decadal variation of the north-south asymmetric Sea Surface wind in the tropical Pacific,especially in the South Pacific Convergence,is the dominant mechanism of the nature decadal variation of the subsurface temperature in the equatorial Pacific.

Investigation of Flow in Data Rack

The main purpose of this paper was to set up a functioning numerical model of data rack verified by an experimental measurement. The numerical model will serve for the flow simulation inside the data rack. For the aim of experimental verification of the server model, a PIV （particle image velocimetry） method was used. The server model was projected based on the original Rack Workstation Dell Precision 17,5400 （2U rack space）. The flow rate in each channel was implemented with the help of pressure loss, which was set up so that the server flow rate corresponded with the measured values. The verification of the correct functioning of the numerical model of the server was carded out together with verifying the numerical model of a small data rack. The experiment was compared with the numerical model for the case of data rack （12U rack space） fitted with two 2U rack workstations Dell Precision R5400, on which the simulation of several phases of the entire data rack with given configuration was carried out.

Experimental and numerical investigation of unsteady cavitating flows through a 2D hydrofoil

In the present study, firstly, the unsteady cavitating flows around a hydrofoil are studied based on the flow visualization and detail velocity measurement, a high-speed video camera is used to visualize the flow structures, and a particle image velocimetry （PIV） technique is applied to the measurement of the time-averaged and instantaneous velocity and vorticity fields. The results show that the unsteadiness of mass transfer process between the vapor and the two-phase regions is substantial, a self-oscillatory behavior of the whole sheet cavitation is obtained, with large length fluctuations and vapor cloud shedding, and also the cavitation structure depends on the interaction of the water-vapor mixture and the periodic vortex shedding. The main purpose of this experimental study is to offer information for validating computational models, and shed light on the unsteady multiphase transport process of cavitating flows. Furthermore, with an emphasis on the dynamics of the attached turbulent cavitating flows, a filter-based model （FBM） is derived from the k-6 two-equation model, a conditional averaging method aimed at improving unsteady simulation is applied to computation. In comparison to the standard k-ε model, overall, the filter-based model is shown to improve the predictive capability considerably.

Investigation of the Compressible Flow through the Tip-Section Turbine Blade Cascade with Supersonic Inlet

The contribution deals with the experimental and numerical investigation of compressible flow through the tip-section turbine blade cascade with the blade 54″ long. Experimental investigations by means of optical(interferometry and schlieren method) and pneumatic measurements provide more information about the behaviour and nature of basic phenomena occurring in the profile cascade flow field. The numerical simulation was carried out by means of the EARSM turbulence model according to Hellsten [5] completed by the bypass transition model with the algebraic equation for the intermittency coefficient proposed by Straka and P?íhoda [6] and implemented into the in-house numerical code. The investigation was focused particularly on the effect of shock waves on the shear layer development including the laminar/turbulent transition. Interactions of shock waves with shear layers on both sides of the blade result usually in the transition in attached and/ or separated flow and so to the considerable impact to the flow structure and energy losses in the blade cascade.

Theory and experimental verification of valveless piezoelectric pump with rotatable unsymmetrical slopes

A valveless piezoelectric pump with rotatable unsymmetrical slopes is developed in this research.It has the following features:The pump integrates driving and transporting,and it can mix different fluids while transporting them.In this paper,firstly,the design of the valveless piezoelectric pump with rotatable unsymmetrical slopes was proposed,and the single-direction flow principle was explained.Then,the fluid mechanics model of the valveless piezoelectric pump with rotatable unsymmetrical slopes was established.Meanwhile,the numerical simulation of the pump was performed.Finally,the experiments on relationship between the rotation angles of the slope and the flow rates were conducted.The experimental results showed that the maximum flow was 32.32 mL min 1.The maximum relative error between the theoretical results and the experimental ones was 14.59%.For the relationship between rotation angles and flow ratio of two inlets,the relative error between the experimental and theoretical maxima was 3.75%.Thus,the experiments proved the feasibility of the pump design and verified the theory.

Experimental investigation of Reynolds stress complex eddy viscosity model for coherent structure dynamics

Time sequence signals of streamwise and normal velocity components,as well as velocity strain rate,at different vertical locations in the turbulent boundary layer over a smooth flat plate in a wind tunnel have been finely examined by the use of double-sensor hot-wire anemometry.The local module maximum for wavelet coefficient of longitudinal velocity component,as a detecting index,is employed to educe the ejection and sweep process of the coherent structure burst in the turbulent boundary layer from the random fluctuating background.The coherent waveforms of Reynolds stress residual contribution term for random fluctuations to coherent structure,as well as the velocity strain rate of coherent structure,are extracted by the conditional phase average technique.Based on the theoretical analysis of eddy viscosity coefficient in complex eddy viscosity model for coherent structure,the macro-relaxation effect between Reynolds stress residual contribution term of random fluctuations to coherent structure and the velocity strain rate of coherent structure is studied and the variations of the phase difference between them across the turbulent boundary layer are investigated experimentally.The rationality of complex eddy viscosity model for coherent structure is confirmed through the investigation.

Experimental investigation of vortex-induced vibrations of long free spans near seabed

There are many experimental studies dedicated to determining the effect of the proximity of a plane boundary on the vortex-induced vibration (VIV) of submarine pipeline spans, but they all only concerned the first mode VIV motion of the pipe. In this paper, a pipe model, 16 mm in diameter, 2.6 m in length and with a mass ratio (mass/displaced mass) of 4.30, was tested in a current tank. The reduced velocity was in the range of 0-16.7 and gap ratios at the pipe ends were 4.0, 6.0 and 8.0. The response of the model was measured using optical fiber strain gauges. Results of response amplitude and frequency were presented and the transition from the first dominant mode to the second one was shown. In the tests, it was found that the response amplitude experienced a continuous transition between the two modes, but the dramatic increase in the response frequency appeared with the shift in dominant mode from the first mode to the second one as the flow velocity increased. As the gap ratio decreased, the shift in the dominant mode took place at a higher reduced velocity.

Fluid Resistance Characteristics Research of Nanowire Rotation under a Magnetic Field

In this study, a visualization-based experiment was performed to measure the motion of the nanowire under a magnetic field. A simulation method based on a multiple reference flame model （MRF model） was used to calcu- late fluid torque. Here, it was validated with the experimental data and theoretical results. Fluid torque of steady rotated nanowire was simulated and compared using experiment and theoretical models. The unsteady rotated condition was studied using transient simulation to compare with theory and the results showed that the accelera- tion of nanowire did not affect the flow field, indicating that the theoretical models based on the steady condition were still valid. The influence of solid walls on nanowire rotation was also studied here. The results showed that if the nanowire was placed close to the wall, the viscous force of wall would increase the velocity gradient around the nanowire, causing higher torque predictions. The fluid torque decreased quickly when the vertical distance between nanowire and wall exceeded 5 times the diameter of the wire.