For the question of applying high-pressure water injection to increase gas extraction efficiency by increasing the permeability of water to drive gas action, an independently designed gas desorption experimental measu...For the question of applying high-pressure water injection to increase gas extraction efficiency by increasing the permeability of water to drive gas action, an independently designed gas desorption experimental measuring device was used under the condition of external solution invasion. The law of water effect on gas desorption was obtained after water invasion through experiment for the first time. The results show that water＇s later invasion not only can make the quantity of gas dcsorp- tion greatly reduced, but also can make gas desorption end early. Therefore, when evaluating the applications of high-pressure water injection to increase gas extraction efficiency, we should take water damaging effects on gas desorption into account.展开更多
In this study, in order to investigate the power consumption of feed drive system, mathematical models for the single-axis experimental apparatus are developed. This apparatus can be driven by either of ball screw or ...In this study, in order to investigate the power consumption of feed drive system, mathematical models for the single-axis experimental apparatus are developed. This apparatus can be driven by either of ball screw or linear motor and it is possible to change the mechanical properties of such as grease viscosity of the table. Then, the power consumption is simulated by proposed method based on the mathematical model of feed drive systems and the simulated results are compared with the measured results of the experimental apparatus to confirm the validity of the proposed method. In addition, it is clarified that the energy usages of the feed drive system. The energy losses of the feed drive system are divided into the loss of each part and these energy losses are calculated by the proposed method. Then, it is investigated that the influence of the velocity and friction to the energy consumption of feed drive system. As the results, it is confirmed that proposed method can accurately predict the power consumption of the ball-screw feed drive system. It is also clarified that the energy usage for both of ball-screw and linear motor drive systems.展开更多
There has not been an effective method to measure the resistivity of small-size sample of mineral and solid insulating material until now.According to the Chinese National Standard(GB/T1410-2006) and features of digit...There has not been an effective method to measure the resistivity of small-size sample of mineral and solid insulating material until now.According to the Chinese National Standard(GB/T1410-2006) and features of digital high resistance meter,a small electrode experimental installation was developed;it can work with current high resistance meter;the sample decreases to 18 mm from standard size 100 mm in diameter and reduces by 30.86 times in area.A three-electrode system is supported and precisely positioned by two insulating bases whose diameter is 60 mm and height is 20 mm,which ensures accuracy of device structure and reliability of measuring results.The key technological parameters are as follows:diameter of high voltage electrode is 18mm;diameter of measuring electrode is 14.6 mm;internal diameter and external diameter of guard electrode are 16 and 18 mm,respectively;the gap between guard electrode and measuring electrode is set at 0.6 mm.These parameters are adequate for the measurement of flat specimen of mineral and solid insulating material whose diameter is 18 mm.According to the confirmatory experiment on the volume resistivity and surface resistivity,the measuring results are almost the same,using a small electrode experimental installation and a standard electrode.展开更多
Superplastic alloy has very strong structure sensitivity. Superplastic bulging with a die of the plate is related not only to stress state but also closely to loading paths. It is an important basis for bulging formin...Superplastic alloy has very strong structure sensitivity. Superplastic bulging with a die of the plate is related not only to stress state but also closely to loading paths. It is an important basis for bulging forming with a die to study deformation law and experimental apparatus for superplastic free bulging, because the boundary of test piece is fixed and friction is insignificant for free bulging. In the paper, a pure high-pressure argon gas source is used as the loading media after it is heated by the heating system outside the furnace, which improves the heating efficiency and temperature uniformity of the test piece. The photoelectric non-contact measurement device can avoid negative influence on the additional stress and uneven temperature at the peak of bulging part caused by push rod in the contact measurement. The temperature and pressure of the test piece in cylindrical insulation furnace with blank holder give feedback control to improve the control precision. In loading gas channels, the pressure is adjusted by accurately measuring and controlling the rotation angle of the stepping motor, and is loaded by an electro-magnetic valve. It significantly increases the response characteristics of the control pressure. This paper also introduces steps and methods to realize several typical loading paths, such as constant pressure, jump pressure and additional back & differential pressure loading. These provide a new way to measure the strain rate sensitivity index m value and improve the deformation speed of superplastic free bulging.展开更多
文摘For the question of applying high-pressure water injection to increase gas extraction efficiency by increasing the permeability of water to drive gas action, an independently designed gas desorption experimental measuring device was used under the condition of external solution invasion. The law of water effect on gas desorption was obtained after water invasion through experiment for the first time. The results show that water＇s later invasion not only can make the quantity of gas dcsorp- tion greatly reduced, but also can make gas desorption end early. Therefore, when evaluating the applications of high-pressure water injection to increase gas extraction efficiency, we should take water damaging effects on gas desorption into account.
文摘In this study, in order to investigate the power consumption of feed drive system, mathematical models for the single-axis experimental apparatus are developed. This apparatus can be driven by either of ball screw or linear motor and it is possible to change the mechanical properties of such as grease viscosity of the table. Then, the power consumption is simulated by proposed method based on the mathematical model of feed drive systems and the simulated results are compared with the measured results of the experimental apparatus to confirm the validity of the proposed method. In addition, it is clarified that the energy usages of the feed drive system. The energy losses of the feed drive system are divided into the loss of each part and these energy losses are calculated by the proposed method. Then, it is investigated that the influence of the velocity and friction to the energy consumption of feed drive system. As the results, it is confirmed that proposed method can accurately predict the power consumption of the ball-screw feed drive system. It is also clarified that the energy usage for both of ball-screw and linear motor drive systems.
基金supported by the National Natural Science Foundation of China (Grant No. 50974025)the National Key Technologies R & D Program of China (Grant No. 2004BA810B02)+2 种基金the Applied Foundation of Basic Research in Sichuan Province (Grant No. 07JY029-029)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20095122110015)the Scientific Research Foundation of the Education Ministry for Returned Chinese Scholars, China (Grant No. 2010-32)
文摘There has not been an effective method to measure the resistivity of small-size sample of mineral and solid insulating material until now.According to the Chinese National Standard(GB/T1410-2006) and features of digital high resistance meter,a small electrode experimental installation was developed;it can work with current high resistance meter;the sample decreases to 18 mm from standard size 100 mm in diameter and reduces by 30.86 times in area.A three-electrode system is supported and precisely positioned by two insulating bases whose diameter is 60 mm and height is 20 mm,which ensures accuracy of device structure and reliability of measuring results.The key technological parameters are as follows:diameter of high voltage electrode is 18mm;diameter of measuring electrode is 14.6 mm;internal diameter and external diameter of guard electrode are 16 and 18 mm,respectively;the gap between guard electrode and measuring electrode is set at 0.6 mm.These parameters are adequate for the measurement of flat specimen of mineral and solid insulating material whose diameter is 18 mm.According to the confirmatory experiment on the volume resistivity and surface resistivity,the measuring results are almost the same,using a small electrode experimental installation and a standard electrode.
基金supported by the Natural Science Foundation of Jilin Province (Grant No. 201115015)the National Natural Science Foundation of China (Grant No. 51005099)
文摘Superplastic alloy has very strong structure sensitivity. Superplastic bulging with a die of the plate is related not only to stress state but also closely to loading paths. It is an important basis for bulging forming with a die to study deformation law and experimental apparatus for superplastic free bulging, because the boundary of test piece is fixed and friction is insignificant for free bulging. In the paper, a pure high-pressure argon gas source is used as the loading media after it is heated by the heating system outside the furnace, which improves the heating efficiency and temperature uniformity of the test piece. The photoelectric non-contact measurement device can avoid negative influence on the additional stress and uneven temperature at the peak of bulging part caused by push rod in the contact measurement. The temperature and pressure of the test piece in cylindrical insulation furnace with blank holder give feedback control to improve the control precision. In loading gas channels, the pressure is adjusted by accurately measuring and controlling the rotation angle of the stepping motor, and is loaded by an electro-magnetic valve. It significantly increases the response characteristics of the control pressure. This paper also introduces steps and methods to realize several typical loading paths, such as constant pressure, jump pressure and additional back & differential pressure loading. These provide a new way to measure the strain rate sensitivity index m value and improve the deformation speed of superplastic free bulging.
