A large model of the screen was mounted in the laboratory for studying its modal performance. The model is suspended with steel ropes. Modal test was carried out with artificially exciting by 500 g impacting hammer an...A large model of the screen was mounted in the laboratory for studying its modal performance. The model is suspended with steel ropes. Modal test was carried out with artificially exciting by 500 g impacting hammer and 100 kg exciting force shaker respectively. Synthesis and correction of the modal parameters are obtained from both testing methods. Design faults of vibrating screen were determined based on the analy-sis and dynamic correction of structure approaches about the screen was put forward finally.展开更多
The main goal of this study is analysis the mechanical behavior, failure mode and deflections of masonry beams lintels when subjected to concentrated loading. Walls were built using hollow clay blocks, using horizonta...The main goal of this study is analysis the mechanical behavior, failure mode and deflections of masonry beams lintels when subjected to concentrated loading. Walls were built using hollow clay blocks, using horizontal reinforcement on bed joint, and using of Murfor steel reinforcement. The conclusions of this work was： at middle of span, the load and displacement results present a linear behavior until failure; there two regions of failure, the region ＂A＂ presents the association of crushing and the region ＂B＂ shows the shear stress between block and mortar; the visual analysis of experimental tests shows the lost of adhesion between the mortar joint and blocks. It was not observed cracks on the mid-span produced by bending; it is possible to detach that the use of plane truss in Brazil as technological alternative is feasible and makes the masonry walls execution more rational, increasing the velocity of production.展开更多
In the context of this paper, a small scale, medium precision, stabilized pan/tilt platform is developed as a prototype, which is used to compare various stabilization algorithms experimentally. The overall performanc...In the context of this paper, a small scale, medium precision, stabilized pan/tilt platform is developed as a prototype, which is used to compare various stabilization algorithms experimentally. The overall performance of the system depends on rigid body dynamics, structural dynamics, servo control loops, stabilization control algorithm, sensor fusion algorithm and sensory feedback such as from the IMU （inertial measurement unit）. In the case that the response bandwidth of the overall system is high enough, the same hardware can also achieve active vibration isolation. All of these design aspects are investigated in the paper via numerical models and with their experimental verification.展开更多
·Prof.XIONG,could you please give us a brief introduction to SKLMCMS？Director XIONG Ke：The State Key Laboratory of Mechanics and Control of Mechanical Structures（SKLMCMS）was established with the approval of t...·Prof.XIONG,could you please give us a brief introduction to SKLMCMS？Director XIONG Ke：The State Key Laboratory of Mechanics and Control of Mechanical Structures（SKLMCMS）was established with the approval of the Ministry of Science and Technology of the People’s Republic of China in October 2011.The laboratory is located at Nanjing University of Aeronautics and Astronautics（NUAA）.展开更多
Understanding and control of the surface properties such as molecular orientations are of great importance in numerous applications of ionic liquids. However, there remain discrepancies among the previous experimental...Understanding and control of the surface properties such as molecular orientations are of great importance in numerous applications of ionic liquids. However, there remain discrepancies among the previous experimental and theoretical studies on the surface orientation and structures of room temperature ionic liquids(RTIL) systems. In this article, the orientation of 1-butyl-3-methylimidazolium([bmin]) cation at the air/liquid interface of a characteristic RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]), was investigated by the sum frequency generation vibrational spectroscopy(SFG-VS). Detailed polarization and experimental configuration analyses of the SFG-VS spectra showed the possibility of a small spectral splitting in the CH3 symmetric stretching region, which can be further attributed to the probable existence of multiple orientations for the interfacial [bmim] cations. In addition, the(N)–CH3 vibrations were absent, ruling out the prediction by several recent molecular dynamics simulations which state that portions of the [bmim] cations orient with a standing-up(N)–CH3 group at the ionic liquid surface. Hence, new realistic theoretical models have to be developed to reflect the complex nature of the ionic liquid surface.展开更多
基金Supported by Provincial Natural Science Foundation of Shanxi(20031046)
文摘A large model of the screen was mounted in the laboratory for studying its modal performance. The model is suspended with steel ropes. Modal test was carried out with artificially exciting by 500 g impacting hammer and 100 kg exciting force shaker respectively. Synthesis and correction of the modal parameters are obtained from both testing methods. Design faults of vibrating screen were determined based on the analy-sis and dynamic correction of structure approaches about the screen was put forward finally.
文摘The main goal of this study is analysis the mechanical behavior, failure mode and deflections of masonry beams lintels when subjected to concentrated loading. Walls were built using hollow clay blocks, using horizontal reinforcement on bed joint, and using of Murfor steel reinforcement. The conclusions of this work was： at middle of span, the load and displacement results present a linear behavior until failure; there two regions of failure, the region ＂A＂ presents the association of crushing and the region ＂B＂ shows the shear stress between block and mortar; the visual analysis of experimental tests shows the lost of adhesion between the mortar joint and blocks. It was not observed cracks on the mid-span produced by bending; it is possible to detach that the use of plane truss in Brazil as technological alternative is feasible and makes the masonry walls execution more rational, increasing the velocity of production.
文摘In the context of this paper, a small scale, medium precision, stabilized pan/tilt platform is developed as a prototype, which is used to compare various stabilization algorithms experimentally. The overall performance of the system depends on rigid body dynamics, structural dynamics, servo control loops, stabilization control algorithm, sensor fusion algorithm and sensory feedback such as from the IMU （inertial measurement unit）. In the case that the response bandwidth of the overall system is high enough, the same hardware can also achieve active vibration isolation. All of these design aspects are investigated in the paper via numerical models and with their experimental verification.
文摘·Prof.XIONG,could you please give us a brief introduction to SKLMCMS？Director XIONG Ke：The State Key Laboratory of Mechanics and Control of Mechanical Structures（SKLMCMS）was established with the approval of the Ministry of Science and Technology of the People’s Republic of China in October 2011.The laboratory is located at Nanjing University of Aeronautics and Astronautics（NUAA）.
基金supported by the National Natural Science Foundation of China(21073199,91027042,21227802)the National Basic Research Program of China(2013CB834504)
文摘Understanding and control of the surface properties such as molecular orientations are of great importance in numerous applications of ionic liquids. However, there remain discrepancies among the previous experimental and theoretical studies on the surface orientation and structures of room temperature ionic liquids(RTIL) systems. In this article, the orientation of 1-butyl-3-methylimidazolium([bmin]) cation at the air/liquid interface of a characteristic RTIL, 1-butyl-3-methylimidazolium hexafluorophosphate([bmim][PF6]), was investigated by the sum frequency generation vibrational spectroscopy(SFG-VS). Detailed polarization and experimental configuration analyses of the SFG-VS spectra showed the possibility of a small spectral splitting in the CH3 symmetric stretching region, which can be further attributed to the probable existence of multiple orientations for the interfacial [bmim] cations. In addition, the(N)–CH3 vibrations were absent, ruling out the prediction by several recent molecular dynamics simulations which state that portions of the [bmim] cations orient with a standing-up(N)–CH3 group at the ionic liquid surface. Hence, new realistic theoretical models have to be developed to reflect the complex nature of the ionic liquid surface.
