The hybrid system with radiant cooling and dedicated outdoor air not only possesses high energy efficiency, but also creates a healthy and comfortable indoor environment. Indoor air quality will be improved by the ded...The hybrid system with radiant cooling and dedicated outdoor air not only possesses high energy efficiency, but also creates a healthy and comfortable indoor environment. Indoor air quality will be improved by the dedicated outdoor air system(DOAS) and indoor thermal comfort can be enhanced by the radiant cooling system(RCS). The optimal air-supply mode of the hybrid system and the corresponding design approach were investigated. A full-scale experimental chamber with various air outlets and the ceiling radiant cooling panels(CRCP) was designed and established. The performances of different air-supply modes along with CRCPs were analyzed by multi-index evaluations. Preliminary investigations were also conducted on the humidity stratification and the control effect of different airflow modes to prevent condensation on CRCP. The overhead supply air is recommended as the best combination mode for the hybrid system after comprehensive comparison of the experiment results. The optimal proportion of CRCP accounting for the total cooling capacities in accord with specific cooling loads is found, which may provide valuable reference for the design and operation of the hybrid system.展开更多
In this study, indoor air quality （IAQ） assessments were carried out in a screen printing facility. The air sampling was conducted in press department, including two different types of screen printing machines： sem...In this study, indoor air quality （IAQ） assessments were carried out in a screen printing facility. The air sampling was conducted in press department, including two different types of screen printing machines： semi-automatic and automatic. Air samples were collected and analyzed in situ for 4 times, once per 2 hours, during working time of 8 hours. Analysis of the experimental data showed that ambient ozone concentrations slowly increases with the increasing of TVOCs concentration and intensive use of UV lamps during automatic screen printing process. Therefore, the detected concentration levels of ozone and VOCs were compared with the Occupational Safety and Health Administration （OSHA） and Serbian Regulation. Comparison of the two mentioned standard regulations, the ozone concentrations in indoor printing air were from 0.83 to 8.1 and 2.4 to 16.2 times higher in the relation to the prescribed PEL and maximum allowed concentration （MAC） values, respectively, while the concentrations of particular VOCs were much below the PEL prescribed by the OSHA.展开更多
Even all indoor environmental standards are met the users are usually not satisfied and perceived discomfort is occurred in the smart office buildings. The most frequently cause of discomfort in smart buildings is ove...Even all indoor environmental standards are met the users are usually not satisfied and perceived discomfort is occurred in the smart office buildings. The most frequently cause of discomfort in smart buildings is overrun of intelligence. There are physical and psychological factors that influenced building users＇ comfort. An indoor air quality seems to be one of the main problems of smart office buildings. In Slovakia the office buildings relating to indoor environment European standard are mostly evaluated as the non-low polluting buildings. The pollution from building as well as the pollution from occupancy and using was respected. The odor intensity and indoor air acceptability were assessed by a sensory panel. The concentrations of total volatile organic compounds and carbon dioxide were measured. The odors from building materials studied under different air change rate are presented in this paper. The case study of indoor air acceptability concerning to indoor odors under occupancy and its affect on perceived air quality influenced by air change rate are also presented in this paper.展开更多
基金Project(51178298)supported by the National Natural Science Foundation of China
文摘The hybrid system with radiant cooling and dedicated outdoor air not only possesses high energy efficiency, but also creates a healthy and comfortable indoor environment. Indoor air quality will be improved by the dedicated outdoor air system(DOAS) and indoor thermal comfort can be enhanced by the radiant cooling system(RCS). The optimal air-supply mode of the hybrid system and the corresponding design approach were investigated. A full-scale experimental chamber with various air outlets and the ceiling radiant cooling panels(CRCP) was designed and established. The performances of different air-supply modes along with CRCPs were analyzed by multi-index evaluations. Preliminary investigations were also conducted on the humidity stratification and the control effect of different airflow modes to prevent condensation on CRCP. The overhead supply air is recommended as the best combination mode for the hybrid system after comprehensive comparison of the experiment results. The optimal proportion of CRCP accounting for the total cooling capacities in accord with specific cooling loads is found, which may provide valuable reference for the design and operation of the hybrid system.
文摘In this study, indoor air quality （IAQ） assessments were carried out in a screen printing facility. The air sampling was conducted in press department, including two different types of screen printing machines： semi-automatic and automatic. Air samples were collected and analyzed in situ for 4 times, once per 2 hours, during working time of 8 hours. Analysis of the experimental data showed that ambient ozone concentrations slowly increases with the increasing of TVOCs concentration and intensive use of UV lamps during automatic screen printing process. Therefore, the detected concentration levels of ozone and VOCs were compared with the Occupational Safety and Health Administration （OSHA） and Serbian Regulation. Comparison of the two mentioned standard regulations, the ozone concentrations in indoor printing air were from 0.83 to 8.1 and 2.4 to 16.2 times higher in the relation to the prescribed PEL and maximum allowed concentration （MAC） values, respectively, while the concentrations of particular VOCs were much below the PEL prescribed by the OSHA.
文摘Even all indoor environmental standards are met the users are usually not satisfied and perceived discomfort is occurred in the smart office buildings. The most frequently cause of discomfort in smart buildings is overrun of intelligence. There are physical and psychological factors that influenced building users＇ comfort. An indoor air quality seems to be one of the main problems of smart office buildings. In Slovakia the office buildings relating to indoor environment European standard are mostly evaluated as the non-low polluting buildings. The pollution from building as well as the pollution from occupancy and using was respected. The odor intensity and indoor air acceptability were assessed by a sensory panel. The concentrations of total volatile organic compounds and carbon dioxide were measured. The odors from building materials studied under different air change rate are presented in this paper. The case study of indoor air acceptability concerning to indoor odors under occupancy and its affect on perceived air quality influenced by air change rate are also presented in this paper.
