典型粉末型吸湿性催化剂的雾室及静态检测

暖云催化剂在人工影响天气暖云催化降水和暖性云雾消除方面应用前景广阔,近年开发的各类新型材料有望在暖云催化中使用,但目前仍缺少效果理想的制剂配方,亟需在相同试验条件下对比各类吸湿性催化剂的性能。2023年5月在中国气象局云降水物理与人工影响天气重点开放实验室开展催化剂雾室及静态检测试验,评估9种典型粉末型吸湿性催化剂的消雾能力及吸湿特性。结果表明:无机盐类催化剂消雾所需时间最短,多孔复合材料催化剂效果也较好,而改性淀粉、分子筛、有机膨润土及钠基膨润土消雾效果不明显。在常温常湿环境下,CaCl_(2)的静态吸湿能力最强,其次是多孔复合材料,复合盐的吸湿性也较强,其他催化剂吸湿性不明显;在高湿环境下,膨润土类催化剂及分子筛吸湿性仍不佳,NaCl、多孔复合材料的吸湿能力明显高于其他催化剂。各种催化剂在雾室与静态检测试验的性能基本一致。

境外项目的传染病预防检测实验室的建立和运行实践经验

为积极响应“一带一路”伟大战略,越来越多的中国企业选择“走出去”发展海外工程,在取得优异成果的同时,也面对着不同国家特点所导致的各类传染病,如:霍乱、疟疾等等,而面对具有高传染性的病毒特征时,如何采用最为有效的管控措施,是所有企业面临的最严峻的问题,因为在“一带一路”的国家中,不仅需要面对所在国不同的传染病防控政策和相对匮乏的医疗资源,同时还需要积极主动做好传染病预防工作。而在传染病预防工作中,检验作为传染病病毒感染的金标准就显得尤为重要。本文主要将在海外项目中合格病毒检验室的建立和运行相关实践经验进行总结,联合资源共同筹建区域医疗应急中心,通过建立区域应急响应一体化,以供海外企业进一步加强企业自身的传染病防控应对能力,确保海外中方员工的健康。

洞室工程地震CT与VSP联合检测方法及应用实例

地震层析成像(CT)和垂直地震剖面(VSP)法一直作为两种完全分离的探测技术在勘探活动中运用,而洞室工程地震CT与VSP联合检测方法则是充分利用VSP和CT数据采集方式的兼容性,通过一体化观测系统参数设计和优化数据处理流程,将两种地震勘探手段融为一体而成为优化组合技术下的高分辨工程物探方法。方法实验结果表明,地震CT与VSP联合检测方法在近地表岩土工程勘查应用中几乎可以不增加野外工作费用,就能够同时获取地下洞室工程体施测区间内的地震CT数据和关于洞室轴向剖面方向的逆向VSP数据体。

老年缺血性心脏病患者跨室壁复极离散度心电学检测及临床意义

目的：讨论老年缺血性心脏病患者跨室壁复板离散度心电学检测及临床意义。方法：在本院患者中选取70例老年缺血性心脏病患者，作为观察组，另选身体健康者70例作为对照组，对照组和观察组均采用12导联心电图检查，测定24h，检测两组病例的TP—e、QTc、QTa、TP-e／QTc，记录两组心律失常的病例数，分析两者之间的关系。结果：观察组患者比对照组的老年人的QT间期各项数值都要高；观察组中的患者无心律失常的QT间期各项指标要比发生室性期前收缩的患者要低，发生室性心动过速的患者各项QT间期数值是最高的。结论：TP—e、QTc、QTd、TP—e／QTc的数值可以直观的表示出者年缺血性心脏病患者跨室壁复捉离散度的变化，其数值的增大时发生室性期前收缩和室性心动过速的指标，在临床上具有巨大的意义。

脊柱修复术后静脉血栓的预防性检测

1静脉血栓栓塞症形成机制遗传性因素：①常见于先天性抗凝血酶缺乏、活化蛋白C抵抗、纤维蛋白原异常、蛋白C和蛋白S缺乏、凝血因子Ⅷ、Ⅸ、Ⅺ、Ⅻ缺陷、高半胱氨酸血症、抗心磷脂抗体综合征、纤溶酶原激活剂抑制物增多症、血栓调节蛋白异常、异常纤溶酶原血症等先天遗传缺陷，使血液处于高凝状态，易导致静脉血栓的形成。

基于声音识别与温度诊断的天然气泄漏监测

阀室天然气泄漏检测存在误报率、漏报率较高、实用性和可推广性较差等问题,通过对阀室声音样本进行采集,采用时域转频域短时傅里叶技术,提取声音的梅尔倒谱系数特征,基于声音识别和大数据分析技术,构建阀室天然气泄漏声音识别的神经网络模型,同时结合大量模拟泄漏温度实验数据进行辅助诊断。对西部管道公司输气管道2处阀室展开工业性试验,试验结果表明,基于音频相似性与温度诊断的智能诊断方法,诊断准确率在97%以上,取得了较好的预期效果。

A wireless solution for greenhouse monitoring and control system based on ZigBee technology

With the rapid development of wireless technologies, it is possible for Chinese greenhouses to be equipped with wireless sensor networks due to their low-cost, simplicity and mobility. In the current study, we compared the advantages of ZigBee with other two similar wireless networking protocols, Wi-Fi and Bluetooth, and proposed a wireless solution for green- house monitoring and control system based on ZigBee technology. As an explorative application of ZigBee technology in Chinese greenhouse, it may promote Chinese protected agriculture.

Using oligonucleotide suspension arrays for laboratory identification of bacteria responsible for bacteremia

The aim of this study was to develop and validate an oligonucleotide suspension array for rapid identification of 15 bacterial species responsible for bacteremia, particularly prevalent in Chinese hospitals. The multiplexed array, based on the QIAGEN LiquiChip Workstation, included 15 oligonucleotide probes which were covalently bound to different bead sets. PCR amplicons of a variable region of the bacterial 23S rRNA genes were hybridized to the bead-bound probes. Thirty-eight strains belonging to 15 species were correctly identified on the basis of their corresponding species-specific hybridization profiles. The results show that the suspension array, in a single assay, can differentiate isolates over a wide range of strains and species, and suggest the potential utility of suspension array system to clinical laboratory diagnosis.

Laboratory Detection and Diagnosis of Filoviruses

Ebola virus(EBOV) and Marburg virus(MARV),belonging to the Filoviridae family,emerged four decades ago and caused severe viral hemorrhagic fever in human and other primates.As high as 50-90% mortality,filoviruses can cause significant threats to public health.However,so far no specific and efficient vaccine has been available,nor have other treatment methods proved to be effective.It is of great importance to detect these pathogens specific,rapidly and sensitively in order to control future filovirus outbreaks.Here,recent progresses in the development of detection and diagnosis methods for EBOV and MARV are summarized.

Diagnosis of intestinal tuberculosis using a monoclonal antibody to Mycobacterium tuberculosis

AIM:To investigate the utility of immunohistochemical(IHC) staining with an antibody to Mycobacterium tuberculosis(M.tuberculosis) for the diagnosis of intestinal tuberculosis(TB).METHODS:We retrospectively identified 10 patients(4 males and 6 females;mean age = 65.1 ± 13.6 years) with intestinal TB.Clinical characteristics,including age,gender,underlying disease,and symptoms were obtained.Chest radiograph and laboratory tests,including sputum Ziehl-Neelsen(ZN) staining,M.tuberculosis culture,and sputum polymerase chain reaction(PCR) for tubercle bacilli DNA,as well as Tuberculin skin test(TST) and QuantiFERON-TB gold test(QFT),were examined.Colonoscopic records recorded on the basis of Sato's classification were also reviewed,in addition to data from intestinal biopsies examined for histopathological findings,including hematoxylin and eosin staining,and ZN staining,as well as M.tuberculosis culture,and PCR for tubercle bacilli DNA.For the present study,archived formalin-fixed paraffin-embedded(FFPE) intestinal tissue samples were immunohistochemically stained using a commercially available species-specific monoclonal antibody to the 38-kDa antigen of the M.tuberculosis complex.These sections were also stained with the pan-macrophage marker CD68 antibody.RESULTS:From the clinical data,we found that no patients were immunocompromised,and that the main symptoms were diarrhea and weight loss.Three patients displayed active pulmonary TB,six patients(60%) had a positive TST,and 4 patients(40%) had a positive QFT.Colonoscopic findings revealed that all patients had type 1 findings(linear ulcers in a circumferential arrangement or linear ulcers arranged circumferentially with mucosa showing multiple nodules),all of which were located in the right hemicolon and/or terminal ileum.Seven patients(70%) had concomitant healed lesions in the ileocecal area.No acid-fast bacilli were detected with ZN staining of the intestinal tissue samples,and both M.tuberculosis culture and PCR for tubercle bacilli DNA were negative in all samples.The histopathological data revealed that tuberculous granulomas were present in 4 cases(40%).IHC staining in archived FFPE samples with anti-M.tuberculosis monoclonal antibody revealed positive findings in 4 patients(40%);the same patients in which granulomas were detected by hematoxylin and eosin staining.M.tuberculosis antigens were found to be mostly intracellular,granular in pattern,and primarily located in the CD68 + macrophages of the granulomas.CONCLUSION:IHC staining with a monoclonal antibody to M.tuberculosis may be an efficient and simple diagnostic tool in addition to classic examination methods for the diagnosis of intestinal TB.

Triaxial mechanical creep behavior of sandstone

Based on laboratory results of time-dependent mechanical behavior tests,we investigated short-term and mechanical creep behavior of sandstone,observed in conventional triaxial compression experiments at room temperature,using a servo-controlled rheology testing machine.Given our short-term experimental test results,we confirmed deviatoric creep stress levels of sandstone.Multiple deviatoric stress levels were applied in steps to each sample.Each deviatoric stress level before the final failed deviatoric stress was maintained for 48 h or longer.Time-dependent variations of axial strains of sandstone samples are discussed and evaluated.During the creep tests,complete tertiary creep curves of sandstone were observed under failed deviatoric stress levels with different confining pressures.Slices of coal in sandstone samples can lead to distinct tertiary creep deformation failure.

Development and Challenge of HIV/AIDS Testing Laboratory Network and Quality Assurance System in China

This paper describes the development and challenge of HIV/AIDS testing laboratory network and quality assurance system in China. At present,the HIV/AIDS testing laboratories includes three classes,the National AIDS Reference Laboratory,HIV/AIDS confirmatory laboratories and HIV/AIDS screening laboratories. All of them are accredited by the health authorities,and each class of laboratories take charge of their function strictly according to the "National Management of HIV/AIDS Detection (2006)". A complete quality assurance and quality control system for HIV/AIDS testing has been developed,which includes technical training,strict laboratory monitoring and approval,examination or proficiency testing on HIV/AIDS detection,and quality evaluation and supervision of HIV/AIDS diagnostic kits. Besides conduct the routine anti-HIV antibody test,more and more laboratories began to conduct other tests,such as CD4+ T lymphocyte cell counting,HIV viral load,HIV DNA PCR,genotyping,drug resistance,and HIV-1 recent infection test. The primary challenges faced by the HIV/AIDS testing laboratory network are in the areas of laboratory management and quality control. For example,the provincial PT program is inefficient,the internal quality control is conducted perfunctorily,personnel training can not met the needs of the workplace,which need to be improved.

Feasibility study of the transient electromagnetic method for chamber blasting misfire detection and recognition

In this paper,transient electromagnetic method was used to carry out the feasibility study on the detection and recognition of chamber blasting misfire.Firstly,an electromagnetic background field was established in the test;secondly,a benign conductor was preset in the chamber,and then the background field was eliminated after the electromagnetic field was measured;thirdly,the transient electromagnetic field was measured again after blasting;at last,the chamber blasting misfire was detected and recognized by comparing the change of eddy current field of the preset benign conductor before and after blasting.The test results showed that:When the buried depth of aluminum box target was no more than 30 m,transient electromagnetic method can clearly identify the position of the aluminum box;when the buried depth of aluminum box was more than30 m,the buried depth and position of the aluminum box was not sure due to the unknown level of secondary eddy current field generated by aluminum box.

Influence of Fine Sediment on the Fluidity of Debris Flows

Debris flows include a great diversity of grain sizes with inherent features such as inverse grading, particle size segregation, and liquefaction of fine sediment. The liquefaction of fine sediment affects the fluidity of debris flows, although the behavior and influence of fine sediment in debris flows have not been examined sufficiently. This study used flume tests to detect the effect of fine sediment on the fluidity of laboratory debris flows consisting of particles with various diameters. From the experiments, the greatest sediment concentration and flow depth were observed in the debris flows mixed with fine sediment indicating increased flow resistance. The experimental friction coefficient was then compared with the theoretical friction coefficient derived by substituting the experimental values into the constitutive equations for debris flow. The theoretical friction coefficient was obtained from two models with different fine-sediment treatments： assuming that all of the fine sediments were solid particles or that the particles consisted of a fluid phase involving pore water liquefaction. From the comparison of the friction coefficients, a fully liquefaction state was detected for the fine particle mixture. When the mixing ratio and particle size of the fine sediment were different, some other eases were considered to be in a partially liquefied transition state. These results imply that the liquefaction of fine sediment in debris flows was induced not only by the geometric conditions such as particle sizes, but also by the flow conditions.

Measurement of serum paraoxonase-1 activity in the evaluation of liver function

Paraoxonase-1 (PON1) is an esterase and lactonase synthesized by the liver and found in the circulation associated with high-density lipoproteins. The physiological function of PON1 seems to be to degrade specific oxidized cholesteryl esters and oxidized phospholipids in lipoproteins and cell membranes. PON1 is, therefore, an antioxidant enzyme. Alterations in circulating PON1 levels have been reported in a variety of diseases involving oxidative stress including chronic liver diseases. Measurement of serum PON1 activity has been proposed as a potential test for the evaluation of liver function. However, this measurement is still restricted to research and has not been extensively applied in routine clinical chemistry laboratories. The reason for this restriction is due to the problem that the substrate commonly used for PON1 measurement, paraoxon, is toxic and unstable. The recent development of new assays with non-toxic substrates makes this proposal closer to a practical development. The present editorial summarizes PON1 biochemistry and function, its involvement with chronic liver impairment, and some aspects related to the measurement of PON1 activity in circulation.

Low Power Sensor Design for IoT and Mobile Healthcare Applications

This paper reviews recent advances in radar sensor design for low-power healthcare,indoor real-time positioning and other applications of IoT.Various radar front-end architectures and digital processing methods are proposed to improve the detection performance including detection accuracy,detection range and power consumption.While many of the reported designs were prototypes for concept verification,several integrated radar systems have been demonstrated with reliable measured results with demo systems.A performance comparison of latest radar chip designs has been provided to show their features of different architectures.With great development of IoT,short-range low-power radar sensors for healthcare and indoor positioning applications will attract more and more research interests in the near future.

The Prosperity of Using Domestic Triticale Varieties in Kyrgyzstan

The present researches mentioned questions of economic use of domestic triticale and their influences on a phytosanitory condition and fertility of an irrigated arable land in the Chuy Valley of Kyrgyzstan. The result of the work consists of four tables, purpose of the work was to discover roots systems, nutrion value and the main laboratory testing of samples were conducted at the Humboldt University in Berlin, which was completed under the high and compliant standards of the world. The present research conducted on triticale varieties was firstly studied in Kyrgyzstan.

Experimental Fault Detection in Rotation System Using State Observers by LMIs

Rotating systems have many applications in wide-ranging industrial contexts. The breakdown of this equipment results in economic wastes and leads to dangerous situations. To avoid such problems is very important, and it can be done through tools that inform about the existence of faults, as well as, about their progress in time. A review of the modeling process used for rotor-support-structure shows that the finite element method is the maj or method employed. In this paper, with the aid of well defined theoretical models, obtained using the finite element technique, and the state observer method for the identification and location of faults, it is possible to monitor the parameters of a rotor-support-structure system, including the foundation effects. In order to improve safety, these parameters must be supervised in case of the occurrence of failures or faults. The state observers are designed using Linear Matrix Inequalities （LMIs）. Finally, experimental results （using for this a rotation system in the mechanical vibrations laboratory at Ilha Solteira＇s Mechanical Engineering Department） demonstrate the effectiveness of the methodology developed.

Electromagnetic Compatibility Technology of Electric Vehicles and Its Development Trend

The electromagnetic compatibility of electric vehicles is not only the important technology issue in researches,development and industrialization of electric vehicles,but also the key research area of ISO.In this paper,both national and international standards of electromagnetic compatibility of electric vehicles are analyzed;it is also suggested that our standards of electromagnetic compatibility of electric vehicles be improved from several aspects such as testing items,test procedures,limit value,etc.The electromagnetic environment of electric vehicles is analyzed in terms of interfering sources,providing the solutions to electromagnetic compatibility and measures of reducing electromagnetic interference.Advanced equipments introduced into Chinese electromagnetic compatibility testing laboratories accelerate the pace of the researches on related technologies and standards;China will develop the standards system which covers from the complete electric vehicle to the key components,promote the technology improvement and industrialization work of Chinese electric vehicles,transform the latest achievements and advanced experiences of Chinese electric vehicles industry to the related standards and contribute the development of international standards.